Wtw1500 Parts

The Washer Water Inlet Valve is an OEM part for Whirlpool washing machines. This valve controls the flow of water into the washer, opening and closing to allow the correct amount of hot and cold water into the machine during different stages of the wash cycle.

Causes of a bad water inlet valve can include wear and tear over time, sediment build-up, or damage from high water pressure. These issues can cause the valve to malfunction, leading to improper water levels or no water entering the machine at all.

Symptoms of a bad water inlet valve include:

• Washer not filling with water
• Slow fill or no water flow
• Water leaking from the valve area
• Inconsistent water temperature during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Inlet Valve is an OEM part for Whirlpool washing machines. This part ensures that the right amount of water enters the washing machine at the correct times, contributing to optimal washing conditions and efficient use of water.  

A failing Water Inlet Valve can be caused by mineral deposits from hard water, which can clog or restrict water flow, or by electrical failures that prevent the solenoids from operating correctly.  

Symptoms of a bad Water Inlet Valve include:

• The washing machine not filling with water
• Water filling too slowly or continuously
• Water leaking inside the washer
• Unusual noises during the fill cycle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This small mounting screw secures the appliance's timer to its bracket or control console. It replaces missing or stripped hardware to keep the timer stable, properly aligned, and operating smoothly when you turn the control knob.

• Fastens the timer assembly securely to its mounting bracket or console
• Prevents shifting and vibration that can make the control feel loose or wobbly
• Helps maintain proper alignment of the timer shaft/knob
• Ideal replacement when original hardware is missing or threads are damaged

• Disconnect power before servicing; shut off gas if applicable
• Access the control console and support the timer while removing/reinstalling hardware
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening into plastic or thin metal
• Replace screws one at a time to keep the timer aligned

This gearcase is the washer transmission that transfers motor torque to the agitator and wash basket, restoring agitation and spin function in compatible top-load washers. Durable replacement for worn or noisy transmissions. What it does

• Converts motor rotation into the geared motion needed for agitation and spin.
• Stops gear slippage and restores proper agitation when the original unit is worn.
• Can reduce grinding, clunking, or loss-of-drive symptoms related to a failed transmission.
• Supports normal wash and spin cycles when installed correctly.

• One gearcase (transmission) assembly.

• Disconnect power and water before starting any repair.
• Requires basic hand tools and access to the washer cabinet; some models need the agitator, basket, and motor removed.
• Inspect associated seals, fasteners, and linkage for wear and replace as needed; use factory service instructions for torque and alignment.

This replacement brace reinforces appliance cabinet structure to restore proper alignment and reduce vibration. It helps maintain secure mounting of adjacent panels so doors and controls operate smoothly. What it does:

• Provides structural support for the appliance cabinet and connected panels
• Reduces rattling or vibration caused by loose or bent cabinet components
• Helps realign panels that are pulling away or not closing flush
• Useful when visible damage, bending, or missing support causes fitment issues

• Disconnect power and, if applicable, gas supply before starting any repair
• Remove outer cabinet panels or access panels to reach the brace mounting points
• Retain original fasteners when possible; replace damaged screws or clips as needed

This is an electronic control board that is made for use with washing machines. It is an internal component that ensures the washing machine operates correctly. The electronic control board monitors sensors throughout the appliance to ensure wash and spin speeds, drain and fill time, and water temperature is regulated. It also carries out user commands for washing machine cycle preferences.If the electronic control board has failed or gone bad, it can cause several problems. The washer may not spin, drain, fill, or even start a cycle. If it's determined that the problem is related to the electronic control board, it will need to be replaced. Unplug the washer and check the wire connections on the electronic control board. If they are fine, the electronic control board needs to be replaced. A putty knife, nut driver, and flat screwdriver will be needed. Remove the knob, open the console, and disassemble the main control board to remove it. Install the new replacement part and reassemble.This authentic OEM part is made for washing machines manufactured by Whirlpool. The component comes directly sourced from the manufacturer, and it is sold as a single part.