Wtw4000bq Parts

Size: 29 1/4 inches x 31 1/4 inches. This universal washer drip tray is large enough for duet washers and sits under the washer to protect your floors from scuffs, spill, etc. Includes a PVC drain fitting.

This ice dispenser drive motor powers the auger inside the ice bin, moving ice through the chute when you press the paddle. Replacing a weak or failed motor restores dependable dispensing of cubed or crushed ice. What it does:

• Rotates the auger to push ice from the bin to the dispenser chute
• Delivers the designed torque and speed for consistent dispensing
• Helps resolve ice not dispensing, auger not turning, humming/clicking from the door, or intermittent/slow dispensing
• Replaces a motor that is seized, noisy, or does not start

• 1 drive motor

• Disconnect power to the refrigerator before servicing
• Remove the ice bin and access the motor per your model's service/owner documentation
• Note wire orientation; transfer the coupler, bracket, and screws from the original motor if required
• After installation, verify the auger turns freely by hand and test dispense before reassembly

Used from harness to top.

Right hand side. For screws use WPW10119828.

The Knob is an OEM component for Whirlpool dryers. As the user interface, it allows selections of temperature, settings, and time options with the twist of a finger.

Designed for comfort during extended cycles, the durable knob utilizes non-slip textured surfaces around robust internal gears. Integrated fasteners mount securely to shafts coupling knobs to their respective switches. 

Causes of faulty knobs can include stripped internal teeth from mineral deposits binding moving parts or broken mounting tabs weakened through normal wear over many years.

Symptoms of a damaged knob include:

• Failure to engage settings or spin freely  
• Dials loose on shaft allowing accidental shifts   
• Missing labels from normal cleaning/wear reducing visibility
• Cracks or breaks compromising seal against moisture

Replace yours today with this genuine Whirlpool knob to restore easy navigation of cycles. Compatible with Kenmore and some Maytag dryers.

Right hand side

This outer tub is the main water-holding housing for a top-load washing machine. It supports the inner basket and seals the wash chamber, helping the washer contain water and direct proper wash action. What it does:

• Holds wash water and surrounds the inner basket during fill, wash, and rinse cycles
• Supports the inner tub and transmission/agitator assembly for stable operation
• Prevents leaks by maintaining the sealed wash chamber; a cracked tub can cause visible water under the machine
• Helps reduce noise and vibration by keeping the wash components aligned

• One outer tub

• Disconnect power and water supply before beginning any repair
• Drain any remaining water from the tub and remove the washer cabinet or top to access the tub
• Transfer any components (basket, agitator, seals, mounting hardware) only if explicitly listed in your parts list; replace worn seals and gaskets when reinstalling

This electronic control board coordinates your appliance's functions by processing inputs and powering components in the correct sequence. Replacing a failed board restores proper operation, reliable starts, and consistent cycle performance. What it does:

• Directs the timing and sequence of operations based on user selections and sensor feedback
• Distributes power to motors, valves, heaters, or other loads via onboard relays/triacs
• Monitors inputs and may log or signal fault codes to aid troubleshooting
• Symptoms of a failing board can include no power, unresponsive controls, won't start or complete a cycle, intermittent shutdowns, or error codes

• 1 electronic control board

• Disconnect power to the appliance before servicing; verify no voltage present
• Protect from static discharge; handle the board by the edges
• Transfer any jumpers, mounting hardware, or selector plugs from the original board; move connectors one at a time to matching locations
• Some models require configuration or code entry after installation—follow the tech sheet for your appliance

Replacement protective shield that covers and protects internal components from abrasion, heat and debris. Restores the appliance's original barrier to help prevent component damage and reduce noise from loose or contacting parts. What it does:

• Protects wiring, sensors and nearby components from heat, debris and direct contact
• Helps prevent rubbing or contact that can cause noise or premature wear
• Restores the intended barrier to reduce risk of foreign-object damage
• Useful when the original shield is cracked, bent or missing

• Disconnect power (unplug or shut off breaker) before beginning any repair
• Remove required panels to access mounting points; save and reuse original fasteners when possible
• Align shield and secure without over-tightening to avoid distortion

This replacement nut secures appliance parts and hardware to keep assemblies stable and prevent loose connections. It's a simple, direct replacement for worn or missing fastening hardware to restore proper fit and reduce vibration. What it does:

• Fastens mounting studs, brackets or panels to hold components in place
• Restores secure mechanical connections that can loosen over time
• Helps eliminate rattling, vibration and misaligned panels caused by missing or stripped hardware
• Provides a straightforward, durable replacement for corroded or damaged nuts

• Disconnect power to the appliance before beginning any repair
• Use the correct-size wrench or socket; ensure threads engage smoothly before tightening
• Tighten until snug—avoid overtightening that can strip threads or damage components
• Inspect mating threads and replace any damaged studs or hardware for a reliable repair

Restore precise cycle selection with this rotary encoder cycle switch. Mounted behind the control knob, it sends your chosen setting to the washer's control, resolving unresponsive or erratic knob behavior so the correct cycle and indicators engage.

• Translates knob rotation into signals the main control uses to select a wash cycle
• Helps ensure the selected cycle registers accurately on the user interface
• Wear or internal faults may cause an unresponsive or erratic cycle knob
• May also lead to incorrect indicator lights, intermittent selection, or a no-start condition

• Disconnect power before servicing
• Pull the knob straight off; open the console to access the encoder
• Release locking tabs and transfer wiring one connector at a time; align the keyed shaft
• Reassemble and verify the indicators respond to knob rotation before running a load

This knob assembly replaces the "modifier" control knob on the console so you can adjust settings smoothly and reliably again. Restore a secure, positive-turn feel when the original knob is cracked, stripped, or missing.

• Attaches to the control shaft to select and adjust options/settings
• Replaces knobs that are cracked, broken, or missing
• Fixes a knob that spins freely, slips, or won't turn the control
• Restores proper selection and tactile feedback during use

• Disconnect power to the appliance before servicing
• Pull the old knob straight off the shaft; avoid prying against the panel
• Align the flat/splines on the new knob with the shaft and press on firmly until fully seated
• The pointer aligns with the panel markings before use

This fill hose carries water from the home supply to the appliance inlet valve, restoring proper water fill and helping prevent leaks when the original hose is cracked, worn, or blocked. Ideal for replacing damaged inlet lines. What it does:

• Delivers water from the household supply to the appliance inlet valve for normal fill cycles.
• Replaces cracked, split, or deteriorated hoses that can cause leaks at connections.
• Resolves symptoms such as slow or no water fill, visible leaks, or intermittent filling.
• Durable replacement designed to match OEM routing and connection points.

• Always shut off water supply and disconnect power before starting work.
• Inspect and replace hose clamps or inlet gaskets as needed; ensure proper seating to prevent leaks.
• Hand-tighten fittings and secure clamps—avoid overtightening metal fittings.
• After installation, restore water and power and run a short fill cycle while checking for leaks.

This electronic control board is the primary control module that manages your appliance's operations. It interprets inputs and controls power to components so selected settings run properly and the appliance responds as expected. What it does:

• Coordinates timing and functions based on user selections and sensor feedback
• Directs power to key components as required for operation
• Monitors system status and executes stored control logic
• Common symptoms of a failed board include no power to controls, won't start, unresponsive or erratic controls, programs not running or stopping unexpectedly, or control-related error codes

• 1 electronic control board

• Disconnect power to the appliance before servicing
• Use ESD precautions; handle the board by the edges to avoid static damage
• Photograph/label wiring and transfer all connectors and any brackets from the old board to the new one
• Restore power and run a test/diagnostic per the service sheet for your model

Size: .20 Fl. Oz. (6 ml)

Screw: 8-16 x 3/8 inch.