Wtw5800bco Parts

This hinge secures and guides a refrigerator door on its pivot, helping the door open and close smoothly while maintaining proper alignment and seal. It's a direct-fit replacement when the original hinge is worn or damaged. What it does:

• Replaces a worn or broken door pivot to restore proper door movement and alignment
• Prevents sagging or binding that can stop the door from closing fully
• Helps maintain an effective door seal to protect cooling performance
• Works as the mechanical mounting point between the door and cabinet

• Basic hand tools are typically required; support the door while removing and installing the hinge
• Follow manufacturer guidance for torque and alignment; adjust door leveling as needed after installation
• Disconnect power and remove contents from the door if required for safe handling

This door hinge replaces a worn or damaged refrigerator door pivot to restore smooth opening and secure door alignment. It provides a stable mounting point so doors open and close without sagging or binding. What it does:

• Supports the refrigerator door and keeps it aligned on the cabinet
• Enables smooth pivoting action for opening and closing the door
• Commonly used to fix door sag, sticking, rubbing, or uneven gaps
• Works with original mounting hardware locations to maintain correct seal

• Unplug the appliance or disconnect power before starting work
• Remove food and secure the door; have a helper support the door during removal/installation
• Use basic hand tools; avoid over-tightening fasteners to prevent damage
• Check door alignment after installation and adjust as needed for a proper seal

This cabinet is the main outer housing that supports and protects the appliance's internal components while giving the unit its finished exterior. It restores structural integrity and proper panel alignment for safe, reliable operation. What it does:

• Provides the structural frame and mounting surface for controls, panels, and internal components
• Protects internal parts from dust, moisture, and incidental contact
• Helps maintain proper airflow and component positioning to reduce vibration and noise
• Restores correct panel alignment and closure when the original cabinet is dented, cracked, or corroded

• One cabinet

• Disconnect power (and gas, if applicable) before beginning any repair
• Installing may require removing trim, controls, and internal components; keep fasteners organized
• Use proper lifting technique and a second person for heavy or bulky cabinets to avoid damage or injury

This factory screw secures appliance panels and components, keeping them properly aligned and quiet during operation. Replace a stripped, corroded, or missing fastener to restore a snug fit and dependable performance in the original mounting location. What it does:

• Fastens brackets, panels, trim, or internal hardware to the cabinet/frame as specified by the manufacturer
• Helps maintain proper alignment and reduce rattling or vibration when a screw is worn or missing
• Direct replacement for damaged, stripped, or rusted hardware
• Used in various locations per the service diagram; match to the original position

• 1 screw

• Disconnect power (and shut off water or gas, if applicable) before servicing.
• Compare length and thread style to the original; install in the same location.
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten.
• Reinstall any brackets or panels in the correct order.

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

Note: Bearings are only available with the gearcase assembly.

This replacement bezel is the outer trim that surrounds and protects your appliance's control panel, restoring a finished look and shielding buttons and displays from dirt and damage. It's a simple cosmetic and protective repair. What it does

• Covers and protects the control area from spills, dust and everyday wear.
• Restores a clean, finished appearance when the original bezel is cracked, scratched or discolored.
• Helps keep buttons and displays secure and properly aligned.
• Stops rattling or loose trim that can occur when the bezel is broken or warped.

• One bezel (trim) as shown.

• Disconnect power to the appliance before starting any work.
• Removal typically requires loosening a few screws or clips on the control panel; support the panel while removing the bezel.
• Handle edges carefully to avoid scratching the new trim and wear gloves to prevent cuts.

The Lid Hinge is an OEM part for Whirlpool washing machines. It connects the lid to the washing machine body, allowing the lid to open and close smoothly. This hinge ensures the lid remains securely attached while providing the necessary movement for easy access to the washer drum.

Common causes of a bad lid hinge include repeated use over time, accidental impact, or corrosion from exposure to moisture. These factors can cause the hinge to become loose, stiff, or broken.

Symptoms of a bad Lid Hinge include:

• Difficulty opening or closing the lid
• The lid not staying open or falling shut unexpectedly
• Unusual noises when moving the lid
• Visible damage or rust on the hinge

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This facia assembly is the dispenser front panel that restores the appearance and proper user access to the detergent/softener dispenser. It provides a clean, secure fit for the dispenser opening and controls. What it does

• Replaces a cracked, warped, or broken dispenser front panel to restore a proper seal and appearance.
• Keeps detergent and fabric softener contained and directed into the dispenser slot.
• Provides the mounting surface and user access for the dispenser insert and controls.
• Helps prevent water or detergent from leaking into the console area around the dispenser.

• One dispenser facia assembly.

• Disconnect power to the appliance before starting any repair.
• Some installations require removing the console or control panel—handle panels gently to avoid scratching.
• Use appropriate screwdrivers and keep fasteners organized for reassembly.

Color: White. Size: 1 qt. can. Acrylic appliance paint.