Wtw8127lc Parts

A U-bend retainer designed to secure a U-shaped heating element or tubing in place, preventing movement and vibration for reliable operation. Fits as the replacement hold-down clip used on compatible Whirlpool HVAC and appliance assemblies. What it does:

• Secures U-shaped element or tubing to the appliance frame or mounting bracket
• Prevents rubbing or vibration that can lead to wear or noisy operation
• Helps maintain proper spacing and alignment of the element for consistent performance
• Used where a compact, U-shaped clamp is required to hold components safely

• One U-bend retainer clip as shown

• Inspect the surrounding area and replaced part for damage before installing
• Use basic hand tools; align clip over the U-bend and fasten to the designated mounting point
• Disconnect power and allow components to cool before attempting repair
• Replace with the exact OEM fasteners

This left-side door hinge restores proper door alignment and smooth opening on compatible refrigerators. It supports door movement and helps maintain a tight seal for reliable cooling performance. What it does:

• Replaces a worn or bent left door hinge to stop uneven door sag and scraping
• Helps restore correct door alignment for even closing and improved seal
• Reduces noise and binding when opening or closing the door
• Compatible with VMax-style hinge mounting; used where hinge geometry matches OEM design

• One left-side door hinge

• Mounting hardware may be required; confirm included items before beginning
• Disconnect power and empty door bins as needed for safe access
• Support the door during removal/installation to prevent damage or injury

This is a 10-32 threaded stainless steel screw used to fasten components in compatible Whirlpool appliances. Its corrosion-resistant finish helps maintain a secure connection and long-lasting hold where a small machine screw is required. What it does:

• Fastens panels, brackets, or hardware using a 10-32 machine thread
• Stainless steel construction resists rust and corrosion in humid appliance environments
• Small .276 in length is for shallow mounting applications or thin materials
• Helps stop loose parts that can cause noise, vibration, or poor panel fit

• Use the correct 10-32 driver and avoid over-torquing to prevent strip or damage
• Disconnect power to the appliance when accessing internal components
• Wear eye protection and follow OEM service instructions for safe repairs

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This user interface wiring harness connects the control board to the VMax 2.0 touch/display module so the console responds correctly. It restores reliable signal and power routing between the control and the front panel. What it does:

• Carries power and signal lines between the main control board and the VMax 2.0 user interface
• Enables touchpad/LED display responsiveness and proper button input detection
• Can cause unresponsive controls, blank display, or intermittent console behavior when damaged
• Replaces worn, frayed, or corroded connectors that interrupt communication

• Disconnect power to the appliance before beginning any repair
• Handle connector ends carefully; align and seat connectors fully to avoid bent pins
• Inspect mating connectors on the control and UI for damage before installation

This wire shield is a molded protective cover that helps keep wiring routed and protected from heat, abrasion and moving parts. It prevents chafing and reduces the risk of shorts for a safer appliance operation. What it does:

• Covers and routes wiring to protect insulation from heat and friction
• Prevents wires from contacting sharp edges or moving components
• Helps stop intermittent shorts, arcing, or wiring damage that can cause odor or failures
• Maintains proper wire position to support consistent electrical connections

• One wire shield

• Disconnect power to the appliance before beginning any work
• Secure with existing clips or fasteners; do not force or modify the part
• If wiring insulation is melted or damaged, replace wiring/harness before reassembly

The Dispenser Tray is an OEM part for Whirlpool top-loading washing machines. Located inside the detergent drawer, this durable molded tray is designed to hold liquid detergent packs safely in place during cycles. Its size and dimensions facilitate convenient single-dose placement.

Causes for replacement may include cracks, warping, or discoloration due to mineral buildup affecting the tray structure over time.

Symptoms of a faulty tray involve:  

• Difficulty loading or securing detergent packs properly   
• Leaks or spills of detergent inside the drawer compartment
• Off-center or displaced detergent dosing during the wash

This OEM Whirlpool replacement is compatible with select Whirlpool, Maytag, and other major brand front-loaders.

The Wash Plate is an OEM part for Whirlpool washing machines. Located inside the washer tub, the wash plate works with the agitator to gently push clothes up and down in the water during the wash cycle.

Due to the force of the agitator rubbing against clothes, wash plates can wear down over time and use. Microscopic cracks or chips in the plastic material allow contaminants to lodge underneath and cause abnormal vibrations and noises.

Symptoms of a bad wash plate include:

• Excessive shaking or vibrating
• Loud clunking or grinding noises
• Leaks around the tub seal
• Damage or cracks visible on the wash plate surface

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This leveling foot threads into the base of your appliance to support and stabilize it. Adjusting the foot helps level the cabinet, reduce wobble and vibration, and keep doors aligned for smooth, reliable operation. Also called a leveling leg. What it does:

• Provides an adjustable contact point to stabilize the unit on the floor
• Helps level the cabinet so doors align and seal properly
• Reduces rocking, rattling, or excessive vibration on uneven surfaces
• Replaces a cracked, stripped, or missing leveling leg

• 1 leveling foot

• Unplug the appliance and turn off water supply if applicable
• Use a helper to carefully move or tilt the unit; support it securely
• Unthread the damaged foot; thread in the new foot by hand, then fine-adjust with a wrench
• Level side-to-side and front-to-back; ensure all feet make firm floor contact

This agitator is the vertical post in your top-load washer that moves clothes through the wash water. Replacing a worn or stripped agitator restores proper wash action and helps improve overall cleaning performance.

• Transfers motion from the drive shaft to roll and move laundry through the tub
• Circulates water and detergent for effective soil removal
• Maintains load turnover during the wash cycle
• Common symptoms: no or weak agitation, loose/wobbly agitator, clicking during wash, or poor cleaning results

• Disconnect power and water; use caution around sharp cabinet edges
• Remove the agitator cap and retaining fastener; lift the agitator straight up
• Align the splines on the new agitator with the drive shaft, seat fully, and reinstall the fastener and cap
• Run a short wash to ensure smooth operation and no unusual noises

The Spanner Nut is an OEM part for Whirlpool washing machines. As a critical component, the spanner nut attaches and secures the rear bearing housing to the tub assembly. It maintains proper alignment of internal components and prevents misalignment that can lead to failure. 

Causes of a bad spanner nut can include wear and tear over time, stripping of threads due to over-tightening, or damage from impact or corrosion.  

Symptoms of a bad spanner nut include:

• Vibration or excessive noise during spin cycles
• Rubbing or grinding noises from internal components  
• Reduced spin efficiency and unbalanced loads
• Premature failures of other components like belts or bearings

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore washing machine models.

The Dispenser is an OEM part for Whirlpool washing machines. This part automatically dispenses the right amount of detergent at the optimum time in the cycle.

Causes of a faulty dispenser can include clogged or damaged dispenser tubes from mineral buildup, or a worn dispenser drawer that no longer opens fully.

Symptoms of a bad dispenser include:

• Residual detergent left in the drawer after cycles
• Stained or dirty dispenser area from leaks/overflows
• Incomplete or insufficient cleaning from improper detergent dosing

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.