Wtw8127lc Parts

This water inlet valve controls water flow to the refrigerator's dispenser and ice maker so you get reliable filling and stop leaks when the original valve fails. Installs as a direct replacement to restore proper water flow. What it does:

• Controls water supply to the ice maker and door dispenser; solenoids open/close flow on demand.
• Stops water when the dispenser or ice maker is not calling for water.
• Common signs it needs replacement: no water from dispenser, slow or no ice production, continuous leaking or dripping, or the refrigerator runs but won't fill the ice mold.
• Helps prevent water damage by shutting off flow when the valve closes.

• Turn off power and shut off the water supply before starting; relieve line pressure by running the dispenser briefly.
• Inspect supply tubing and fittings for damage; replace any brittle or cracked lines.
• Tighten connections evenly and check for leaks after restoring water and power.

The Drain Hose is an OEM part for Whirlpool washing machines. It is a flexible tube that diverts water from the washer tub during drain cycles, guiding it out of the appliance and into a nearby drain source such as a sink. 

Causes of a bad drain hose can include cracks or abrasions developing over time due to repeated bending and flexing during drain cycles. Mineral or hard water buildup inside the hose can also lead to clogs. Other potential causes are physical damage from rodents, pets, or accidental punctures.

Symptoms of a bad drain hose include:

• Incomplete draining or water remaining in the washer tub after cycles  
• Leaks or drips forming around the drain hose connection point
• Puddles or water pooling under or around the washing machine
• Slow drainage during spin cycles

This replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washer models.

The Sound Shield is an OEM replacement part for Whirlpool washers. It is a sheet metal panel installed behind the tub that helps reduce noise and vibration during spin cycles. With absorptive insulation, the sound shield dampens noise produced internally. 

Symptoms of a damaged sound shield include:

• Excessively loud operation, especially during high-speed spins
• Rattles, clanks, or resonant noises from inside the washer  
• Potentially weakened structure allowing tub movement
• Causes of a damaged sound shield can include tears or dents sustained over many high-speed spin cycles. Constant vibration may cause stress cracks or loose rivets.

 It is also compatible with some  Whirlpool, Maytag, Amana, and Kenmore brands.

This stator is the stationary motor assembly that creates the magnetic field to drive the washer motor. It restores proper motor function so the washer can agitate and spin reliably when the rotor and drive are working. What it does:

• Generates the magnetic field needed for the washer motor to turn the rotor and tub
• Replaces a worn or damaged stator that can cause humming, no-spin, no-agitate, or intermittent motor operation
• Works with the rotor and motor assembly to deliver consistent torque during wash and spin cycles
• Designed to fit the original motor housing and align with factory mounting points

• One stator assembly

• High-level replacement only; motor disassembly is required—refer to manufacturer instructions or a service manual
• Disconnect power before servicing to avoid shock or injury
• Inspect rotor, bearings, and wiring while motor is accessible; replace any damaged components

The Wire Harness is an OEM replacement part for Whirlpool washing machines. It is a crucial component that acts as the electrical wiring system, connecting various components and allowing them to communicate and transfer power effectively.

Symptoms of a bad Wire Harness include:

• Washer not powering on or receiving electricity
• Specific components or functions not working correctly
• Error codes or warning lights displayed on the control panel
• Burning smell or visible signs of electrical damage

Causes of a bad wire harness can include physical damage from impact or pinching, exposure to moisture or water, electrical surges or shorts, and general wear and tear over time. Faulty wiring can lead to connectivity issues and disrupt the proper operation of the washer's systems.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models. 

This screw is a genuine replacement fastener used to secure appliance panels and components for a reliable fit. It restores proper fastening where original screws are missing, stripped, or damaged. What it does:

• Fastens panels, trim, brackets or small components to keep parts aligned and secure
• Replaces missing or damaged screws that can cause loose panels or rattling
• Restores proper clamping force to prevent movement and wear on adjacent parts
• Matches OEM function and fit when the correct part number is used

• Disconnect power and water before servicing the appliance
• Use the correct driver to engage the head cleanly and avoid stripping
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

This 3-coil dispenser harness connects the dispenser controls to the refrigerator's door components, restoring reliable electrical communication for ice/water dispenser operation. Designed as a direct-fit replacement to return dispenser functions without door modification. What it does:

• Routes power and signal between the dispenser controls and door components so the dispenser operates correctly
• Replaces damaged, frayed or intermittent wiring that can cause non-working or unreliable dispenser behavior
• Helps resolve symptoms such as unresponsive dispenser buttons, intermittent dispensing, or no dispenser activity
• Matches OEM routing and connector configuration for a proper fit and secure electrical connections

• One 3-coil dispenser harness (single assembly as shown)

• Disconnect power (unplug or shut off breaker) before beginning any repair
• Remove dispenser door trim/panel as needed to access and replace the harness per manufacturer instructions
• Match connector shapes and routing clips; secure harness to prevent pinching when reassembling the door

The Basket Assembly is an OEM component for Whirlpool washing machines. As the core component manipulating fabric loads, its durable construction withstands continuous oscillation and rotation.

Precisely balanced, the corrosion-resistant basket lifts, tumbles, and pivots clothing uniformly for thorough yet gentle washing. Easy-rolling suspension glides eliminate vibrations while suspending heavy loads. 

Bad basket assemblies are caused by severe mineral buildup binding moving components or stress cracks developing in welded junctions through years of weekly use.

Symptoms of a bad basket assembly:

• Excessive vibration or noise during operation
• Difficulty spinning dry after wash cycles
• Fabric snags at worn corners or joints  
• Leaks inside tub from cracked basket housing

Replace yours with this genuine Whirlpool assembly for lasting performance that cares for every treasured garment. Compatible with Kenmore, Maytag, and some Jenn-Air machines as well.

This outer washer tub is the main exterior tub that surrounds the inner wash basket, helping contain water and support the tub assembly for dependable washing performance. It restores the washer's water-sealing and structural support. What it does:

• Houses the inner tub and helps contain wash water to prevent leaks
• Provides structural support for the tub assembly and associated seals/bearings
• Works with the inner basket, seals, and suspension to maintain proper wash action
• Can address symptoms such as visible leaks from the tub area or excessive tub movement/noise

• One outer tub (single piece as shown)

• Refer to your model's service manual for step-by-step removal and reassembly and follow OEM torque and seal replacement guidance
• Replace any worn seals, gaskets, or mounting hardware during installation to ensure a proper water-tight fit
• Disconnect power and water supply before beginning service to avoid shock or flooding
• Inspect those components and replace as needed

The Tub Ring is an OEM component specifically designed for Whirlpool washing machines. It forms the cylindrical inner wall atop the washer tub base.  

Symptoms of a faulty tub ring include: 

• Excessive shaking or thumping noises during spin cycles
• Leaks developing near the perimeter joining the tub  
• The outer cabinet appearing misshapen or out-of-round 

Causes such as cracks from repeated impact can compromise the tub's seal. Over time, material may fatigue and weaken bonding.

This Whirlpool OEM part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models as well.

The Bezel is an OEM component for Whirlpool washing machines. Situated at the front base, this decorative surround frames the appliance opening. 

Precision die-cut for a seamless fit, durable composite material stands up to splashes and bumps while retaining a pristine finish. Integrated mounting feet anchor solidly for years of use.

Causes of a faulty bezel can include fading paint from chemical exposure or developing stress cracks from impacts over an extended service period. 

Symptoms of damage include:

• Chipped edges compromising structural integrity   
• Peeling or flaking paint finish diminishing aesthetics
• Gaps along seams allowing intrusion of moisture 
• Mounting brackets corroding from mineral deposits

Replace yours today with this genuine Whirlpool bezel to restore like-new curb appeal. Also compatible with some Maytag, Amana, and Roper models.

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

• Rear panel detaching from frame opening gaps
• Increased noise and vibrations from a compromised seal  
• Stress on other connections from improper mounting points
• Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.