Xfe301lvs Parts

This replacement surface burner control knob restores a clean, precise feel to your range controls so you can set heat levels confidently. Ideal for replacing a cracked, stripped, or missing knob.

• Attaches to the burner valve or switch stem to select heat settings
• Common symptoms: knob wobbles, cracks, slips, or won't stay aligned with settings
• Restores accurate pointer alignment and consistent turning feel
• If the stem itself is damaged, the underlying valve/switch may also need service

• Turn the appliance off and allow all surfaces to cool
• Pull the old knob straight off the stem—do not pry against the panel
• Align the new knob with the stem and press straight on until fully seated at Off
• Rotate through all settings to confirm smooth operation

This is a grommet and it is intended for use on refrigerators and freezers. This is a genuine replacement part made by General Electric. A new grommet might be needed if the current one is visibly worn out or damaged in any way. If there are noises from vibration coming from the lower back area of the fridge there might be need for a new grommet. This is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with refrigerators and freezers, or units with a compressor and is made by General Electric.

This lower freezer basket restores safe, organized storage in the bottom compartment. Replace a bent or missing basket to keep food contained and maintain smooth access to items. What it does:

• Holds and organizes food in the lower freezer compartment
• Engages with existing rails or supports for easy access
• Replaces a cracked, bent, or missing basket to restore fit and function
• Helps prevent items from falling into gaps or interfering with movement

• 1 lower freezer basket

• Empty the area and fully access the lower compartment before removal
• Lift out the old basket; align the new basket on the side rails/supports and set into place
• Do not force; clear any ice buildup on rails/supports before installing
• Wear cut-resistant gloves to protect hands

This oven insulation surrounds the oven cavity to retain heat and protect nearby components and cabinetry. Replacing a burnt or deteriorated insulation blanket restores temperature stability and helps keep exterior surfaces cooler on your range during cooking.

• Minimizes heat loss for more consistent baking temperatures
• Shields wiring, controls, and adjacent cabinets from excessive heat
• Damaged insulation can cause long preheat times or trouble maintaining set temperature
• Exterior panels or control area may feel unusually hot, or a burnt odor may persist after spills

• Disconnect power at the breaker; shut off gas
• Allow the appliance to cool completely before service
• Access typically requires pulling the range and removing outer panels; note original routing and retainers for reassembly
• Handle insulation carefully; wear gloves, eye protection, and a dust mask to avoid irritation from fibers

This refrigerator meat drawer restores a clean, dedicated space for meats and deli items in the fresh food section. Replace a cracked or missing pan to regain smooth sliding, proper fit, and organized storage.

• Provides a dedicated storage area for meats and deli items in the fresh food compartment
• Slides on existing tracks/rails for easy access and proper seating
• Helps contain drips and spills to protect shelves below
• Typical symptoms: cracked or broken drawer, broken tabs, won't slide or seat correctly, falls off tracks, or missing drawer

• Remove contents and pull the existing drawer straight out; lift slightly to clear the rails
• Clean and inspect the tracks/rails before installing the new drawer
• Align the new drawer with the tracks and slide it in until fully seated—do not force
• Allow the new drawer to reach room temperature before installation; cold plastic can crack if flexed

Size: 10-32 GXTT FLP.595 S

This factory screw secures panels, brackets, and other components in your cooking appliance. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and keep parts properly aligned during use.

• Fastens components to maintain proper alignment and stability
• Helps prevent vibration, rattling, and loose parts during operation
• Replace if threads are stripped, the head is damaged, or the screw is missing
• Commonly used to mount internal or exterior parts in ranges and wall ovens

• Disconnect power and allow the appliance to cool; shut off gas supply if applicable
• Use the correct driver bit to avoid stripping the screw head
• Install in the original location and do not overtighten
• If the receiving threads are damaged, repair or replace the mating part before installation

This is a burner control switch for a stove. This part controls the temperature of the heating element on a stove cooktop or range. When the user turns the knob to increase the heat that is produced on the burner, it activates the burner control switch.A new burner control switch may be needed if the user is unable to control the heat on the stove. The burner may get hot and then it may not turn off. The burner may only work when it's on high heat. Alternately, the burner may not heat at all. Never perform care and maintenance on an appliance that is powered on.This is a genuine Frigidaire part and is sourced directly from the manufacturer. It is sold individually. This specific burner control switch is compatible with stove cooktops and ranges that are manufactured by Frigidaire, Kenmore, Crosley, and Westinghouse.

250V.

This lower drawer replaces a damaged or missing bottom drawer on your range, restoring smooth slide action and a flush, finished look so the lower compartment operates correctly and the appliance is complete again.

• Forms the pull-out compartment beneath the oven for convenient access
• Interfaces with the drawer slides to open and close smoothly
• Restores proper alignment and full closure at the base of the range
• Typical symptoms: drawer jams, falls off tracks, sits unevenly, or is bent/dented

• Disconnect power and shut off gas; allow the range to cool before servicing
• Pull the old drawer out and lift to disengage from the slides; transfer any reusable parts as needed
• Set the new drawer onto both slides evenly and test for smooth travel and full closure
• If the drawer doesn't seat flush, re-check slide engagement and appliance leveling

Size: 8-32t x 0.500 inch. Color: Black.

This temperature-activated limit thermostat is a safety switch for the range/wall oven that reacts to excessive heat to protect internal wiring and controls. Replacing a failed thermostat can restore reliable heating and reduce nuisance shutdowns during baking or self-clean.

• Monitors oven/cabinet temperature and switches its circuit at a calibrated threshold to protect components
• Failure symptoms can include: no bake or broil heat, oven shutting off mid-cycle, or loss of heat after a self-clean cycle
• On some models, a failed thermostat may also affect the cooling fan (not running or running unexpectedly)
• Can be checked with a continuity test per your model's tech sheet

• Disconnect power at the breaker and let the appliance cool completely before service
• Location varies by model; commonly mounted to the rear of the oven cavity, upper plenum, or behind the back panel
• Photograph wiring and transfer leads one at a time; reuse original mounting hardware/orientation
• Never bypass a safety thermostat; replace only with the specified part number

This rocker switch is the on/off control used in the appliance's control panel. It opens and closes the circuit to a selected feature, restoring dependable operation when the original switch becomes worn, stuck, or fails.

• Controls a single on/off circuit from the control panel
• Restores proper switching for the associated feature
• Common symptoms: feature won't turn on or off, light or function flickers or stays on, switch feels loose or sticks
• Replaces a cracked, burned, or unresponsive rocker

• Disconnect power at the breaker before servicing
• Access the switch from the control panel or mounting area; note/photograph wire positions
• Move wires to the new switch one at a time and seat the switch securely in the panel opening
• Restore power and test operation before reassembly

The Ice Maker Fan Motor is an OEM part for GE refrigerators. It is a critical part of the automatic icemaker located inside the fresh food compartment. The fan motor works to rapidly freeze water into bullet-shaped cubes.

Symptoms of a failing fan motor include:

• Slow or ineffective ice production
• Leaks or water overflow from the icemaker assembly
• Strange noises coming from the icemaking area

Causes can be due to the motor brush wearing out over extended use, damage to the fan blade inhibiting spin, or failure of electronic motor components.

Replacing with this genuine GE fan motor restores timely ice harvests. It's compatible with Hotpoint, RCA, and Kenmore models to keep up with household demand for chilled refreshments.

This water inlet valve regulates the flow of household water into your refrigerator's water system. Replacing a worn valve can restore proper filling, improve dispenser flow, and help prevent leaks caused by a valve that won't fully close. What it does:

• Opens when energized to allow water in; closes to stop flow
• Supplies the water system your model uses (dispenser and/or ice maker)
• Common symptoms include: no water dispensing, no ice production, slow water flow, dripping from the dispenser, or leaks at the valve
• A failing coil or internal seal may cause buzzing, seeping, or intermittent operation

• One water inlet valve

• Disconnect power and turn off the household water supply before servicing
• Dispense water to relieve line pressure; keep a towel or pan to catch residual water
• Transfer any brackets, fittings, or wire connectors from the old valve as needed; do not overtighten plastic fittings
• Restore water and power, then check all connections for leaks and purge air from the lines

This is the variable control switch for an electric range's cooktop burner. It regulates power to the surface element so you can select steady, repeatable heat levels and restore reliable on/off control. What it does:

• Regulates voltage to a surface element based on knob position (low through high)
• Typical failure symptoms: burner won't heat, only heats on high, won't shut off, or heats inconsistently
• Can address issues when the control shaft is damaged or the switch shows signs of overheating at the terminals

• 1 switch

• Disconnect power before servicing
• Access the control panel/console to reach the switch
• Note wire locations and transfer them to the new switch one at a time
• Secure the switch in the panel, reinstall knob, and test burner operation before reassembly