Keypad Parts

Color: White

Color: White

This keypad is the user interface touchpad for the appliance's control panel, letting you select cycles and settings with responsive button inputs. It replaces a worn or unresponsive touchpad to restore normal front-panel control. What it does:

• Registers button presses and sends user commands to the appliance control board
• Restores front-panel responsiveness when buttons are sticking or unresponsive
• Helps correct intermittent or missing input signals that prevent cycle selection
• Can resolve issues where the display shows settings but will not accept changes

• One keypad assembly

• Disconnect power before servicing
• Handle the keypad assembly carefully and avoid flexing or contaminating the ribbon cable/contacts
• Reconnect ribbon cables and secure any retaining clips; ensure the keypad is seated flush in the control bezel
• If problems persist after replacement, check the main control board and connectors for damage

This Drive PWB is the replacement electronic board that controls the appliance's drive functions, restoring reliable motor and transmission commands for normal operation. What it does

• Controls drive motor speed and direction and sends/receives signals to the main control
• Can resolve symptoms such as no spin/agitate, erratic drive behavior, or unresponsive drive controls
• Re-establishes communication between drive assembly and console when board failure is the cause
• Works as the direct replacement board for the drive electronics in compatible units

• Disconnect power to the appliance before service to avoid shock—verify unit is de-energized
• Handle the board by its edges and avoid touching components; observe basic ESD precautions
• Reconnect all connectors in their original positions and secure mounting hardware

This control panel assembly provides the front-facing electronic interface and buttons that let you select cycles, options, and start or stop the appliance. It restores responsive controls and readable push-button or touch operation. What it does:

• Houses the appliance's main user controls and display so you can select cycles and settings
• Sends user commands to the main control board for operation
• Replaces worn, cracked, or non-responsive buttons or a faded display
• Helps resolve issues where buttons don't register or the panel shows no response

• One control panel assembly as shown

• Disconnect power before attempting service to avoid electrical shock
• Replacement generally requires removing the front console or trim; keep screws and connectors organized
• Handle the panel carefully to avoid damaging the display and ribbon/connectors

This control panel is the user-facing console assembly that houses buttons, touch controls and the display, letting you select cycles and monitor oven status. Replaces a worn, cracked, or unresponsive console to restore normal control operation. What it does:

• Provides the front-facing buttons/touch keys and display used to start and adjust cooking cycles
• Relays user commands to the oven control board for cycle selection and timer functions
• Commonly replaced for symptoms such as unresponsive keys, missing or dim display, or cracked/damaged console
• Interfaces with the main control; does not include internal control electronics

• Disconnect power to the appliance at the breaker before starting any repair
• Replacement typically requires removing the oven door or trim and unscrewing the old panel; keep screws and brackets for reassembly
• Handle the display and ribbon/connectors carefully to avoid damage; verify connector seating before restoring power
• If other control symptoms persist after replacement, test the main control board and wiring harness for faults

This control panel overlay replaces a worn or damaged console decal to restore button labels and the front appearance of the appliance. It lays over the control area to keep the underlying panel readable and protected. What it does:

• Replaces faded, scratched, or peeled control graphics so settings and icons are visible
• Protects the underlying control panel from wear, spills, and minor abrasions
• Restores a clean, factory look to the console for improved user interaction
• Helps resolve issues where worn markings cause confusion when selecting functions

• Disconnect power to the appliance before starting any work
• Remove the original overlay carefully to avoid damaging the underlying control surface
• Use appropriate adhesive or mounting method if required; follow OEM service instructions

This control panel overlay is the thin decorative and functional face that covers the appliance control area, restoring legible button labels and a clean finished look. It helps refresh worn or damaged controls without replacing the whole module. What it does:

• Replaces faded, scratched, or peeled control graphics so buttons and markings are readable again
• Protects the underlying control assembly from spills and light wear
• Restores the original appearance of the control area for improved usability
• Useful when labels are worn or the panel surface is cosmetically damaged

• Disconnect power to the appliance before beginning any work
• Typically aligns over the existing control surface and adheres or secures with the original fasteners — follow OEM instructions
• Handle carefully to avoid creasing; ensure surfaces are clean and dry before installing

This control console is the outer housing that holds and protects the appliance's control buttons and display, restoring a clean, functional front surface and securing the control components. What it does:

• Covers and supports the control board, buttons and display for normal operation
• Restores a finished appearance when the original console is cracked, broken or cosmetically damaged
• Helps keep moisture, dust and debris away from controls to reduce malfunctions
• Provides the mounting surface for knobs, switches and electronic controls

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Handle carefully to avoid scratching the finish and protect any attached wiring or trim
• Typical install requires removing the top or front trim and transferring controls or hardware as needed
• Keep all screws and clips; use the same hardware or OEM replacements for secure fit

This electronic oven timer/clock control replaces a failed timer module to restore timed cook functions and display time. It provides a direct replacement for the oven's timing and clock interface so bake/clean cycles and timed settings work reliably. What it does:

• Controls oven timing and clock display so delayed start, timed bake, and auto-shutoff functions operate correctly
• Replaces a non-working or unresponsive timer/clock assembly
• Can resolve symptoms such as no clock display, countdowns not running, or oven timers failing to start/stop cycles
• Interfaces with the oven control circuits to send start/stop timing signals

• Disconnect power to the appliance before beginning any repair to avoid electrical shock
• Installation typically requires removing the control panel and disconnecting the old timer's wiring harness and mounting hardware
• Handle the display and lens carefully to avoid scratching; confirm electrical connections are secure before reapplying power

Black. No longer includes control board. For control board use 74008952

This membrane switch touch pad replaces the flat electronic control surface on your appliance's control panel, restoring button responsiveness and user input. It provides the tactile contact surface the control board uses to register commands. What it does:

• Registers user button presses so the control board can start cycles and change settings
• Replaces worn, faded, or unresponsive touch buttons that fail to respond consistently
• Restores functions such as keypad entry, start/cancel, and other front-panel commands
• Helps address intermittent or nonworking controls caused by a damaged or worn pad

• Disconnect power to the appliance before starting any work to avoid shock or damage
• Handle the flexible ribbon connector and contacts carefully to avoid creasing or contamination
• Installation typically requires removing the control panel or console; keep screws and fasteners organized

This control panel is the front user interface that houses the oven/dryer's buttons and display, letting you select cycles and settings for normal operation. It restores responsive controls and visible feedback for accurate appliance use. What it does

• Provides the main control surface and display for selecting functions and cycle options
• Translates button presses into electronic signals for the appliance control system
• Common symptoms it addresses: unresponsive buttons, non-working or dim display, or intermittent control behavior
• Works with the appliance's control electronics to show status and error indicators

• Disconnect power to the appliance before starting any work to avoid shock
• Remove outer console/trim per service manual to access and replace the panel
• Handle the assembly carefully to avoid damage to the display, keypad, or circuit board

This control panel is the console assembly that provides the appliance's user interface, giving reliable access to cycle settings and status indicators so you can select and monitor wash/dry functions easily. What it does:

• Houses buttons, touchpads, and display elements used to start cycles and adjust settings
• Communicates user selections to the main control board so the appliance runs chosen cycles
• Restores missing or unresponsive controls and unreadable display elements
• Common symptoms: unresponsive buttons, blank or unreadable display, or non-functioning cycle selection

• One control panel/console assembly

• Disconnect power before starting — electrical shock hazard
• Replace only if confirmed faulty; follow service manual steps for access and connector handling
• Handle the display area and ribbon/connector cables carefully to avoid damage

A replacement glass and touch board assembly that restores the oven/range touch control surface and user interface. Replaces a cracked or unresponsive control glass and the integrated touch-sensing board to recover normal control operation. What it does:

• Replaces the front glass and integrated touch-control circuit for the range/oven control panel.
• Restores touch responsiveness when controls become unresponsive or intermittent.
• Replaces cracked, chipped, or scratched control glass that affects appearance or use.
• Can resolve control errors or display issues caused by damaged glass or touch circuitry.

• Disconnect power (unplug or turn off breaker) before starting any repair to avoid shock.
• Handle the glass carefully and wear gloves; glass can break and cut.
• Some models require removing the control panel or back cover to access and secure the assembly.

This keypad assembly is the user-facing control panel that lets you select cycles and options on your washer. Replaces a worn or unresponsive keypad to restore reliable button response and control readability. What it does:

• Provides tactile button input for cycle selection, start/pause, and option functions
• Restores control responsiveness when buttons are sticky, cracked, or unresponsive
• Maintains the front console finish and label legends for clear visibility
• Interfaces with the washer's control board to send user commands

• Disconnect power to the appliance before servicing to avoid shock or injury
• Access typically requires removing the top or front console cover; keep track of screws and clips
• Handle the ribbon cable and connector carefully to avoid damage; align and seat fully on reinstallation