Need Help?
Call
Fix dishwasher overflows and leaks with a new float assembly. Controls water level to prevent overfilling. Moderate DIY repair with video guide.
Removed bottom cover, located leak at float switch, removed and replaced float switch kit. The toughest part of the repair was removing the Float & Retainer Assembly (in the interior of the machine tank) which broke when I pushed it back and pulled it straight up as suggested in the service manual. The Float Switch Kit (attached to, and below the float, below and outside the tank) has a folding plastic cover which fastens with plastic clips. If you open the switch kit before removing the... Read more
Ice dumping on freezer floor instead of bin? A broken ice maker cover door causes ice to miss the chute. This snap-on cover restores proper ice dispensing.
The video was great - followed the instructions - replaced the parts - icemaker is working like new now. Read more
Supports and stabilizes the washer tub during operation. Replace if spring is broken, stretched, or weak to restore proper tub balance and prevent damage.
Got a small piece of sheet metal for Home Depot, Cut it to fit, and drilled holes to fit. Replaced spring and plastic holder, and put it back together. Spring was a little tricky to put on, because of the spring strength, but I got it. Read more
Replaces broken or worn dishwasher door spring that counterbalances your door. Installs under the unit to restore smooth opening and prevent sagging.
This door spring counterbalances the door so it opens smoothly and doesn't drop. Replacing a fatigued or broken spring restores proper door feel and helps protect hinges and related components from excess strain.
This is an easy home-owner repair! 1. Get down on the floor with a flashlight and a 5/16 nut driver, and remove the two screws holding the lower panel. Those screws are located beneath the lower panel, so you'll have your head on the floor to see 'em! 2. Lift the lower panel up and out. 3. Using the nut driver, remove the two kick-plate screws and lay the kick-plate aside. 4. Discard the broken spring. 5, Look at the remaining spring to determine where the spring should hook. 6. Hook... Read more
Guides ice from your refrigerator door chute into your glass. Replace if cracked, broken, or missing to prevent stray ice and keep the dispenser tidy.
Replaced paddle. Read more
Covers and protects the ice container in your refrigerator. Replace if cracked, broken, or missing to keep ice fresh and prevent contamination.
Replaces a broken, stretched, or fatigued dishwasher door spring that counterbalances the door weight. Restores controlled opening and closing.
Open the dishwasher door and remove the 2 screws on each side of the door frame. Pull out dishwasher from under counter just enough to replace the spring. Push dishwasher back in place and reinstall the four screws. Read more
Restores closing tension for refrigerator ice dispenser recess door. Replace if spring is weak, broken, or missing to keep door closing properly.
I used the video posted on site...note on my model trim bezel did not have to be removed! Read more
Suspension damper shock absorber for front-load washers. Replaces cracked, weak, or broken shocks causing excessive vibration and off-balance loads.
I researched the problem and found that normal wear and tear will cause the Damper shocks and the Suspension spring to fail. I decided to replace all Damper Shocks and the suspension Springs since I had the washer apart already. The Suspension Spring requires a lot of pull to get it in place correctly. I made a hook tool (from political yard sign frame) to hook the old spring to remove and pull the new spring up. It helps to have a second person use leverage (use a short 2x2 board) under the... Read more
Fix dishwasher overfilling or not filling with water by replacing the float assembly. Common issue with sticky buildup preventing proper operation.
I cleaned all the jet nozzles with a toothpick and a pipe cleaner to remove the hard water deposits. I then replace the ring bearing under the bottom spray wand and the ring bearing under the upper spray wand. I also replaced the smaller radial ring bearing. Although none of them looked overly worn, it doesn't take much to cause the spray wands to spray inadequately. Then, I replaced the float and washer assembly. Although it appeared to work properly when I lifted up on it and let it down, it... Read more
Fix a dishwasher that won't fill, overfills, or leaks from the base. Water inlet valve controls flow into the tub. Moderate DIY repair, 30-45 minutes.
Bacteria buildup in the venting assembly and drain hose. Replaced them and it's back to normal Read more
Secures the igniter in its mounting bracket on gas ranges and cooktops. Replace if spring is missing, broken, or worn to restore proper igniter positioning.
Replaced spark module and all electrodes/igniters. Read more
The Funnel Service Kit is an OEM replacement part for GE dishwashers. It includes a water inlet funnel and seals necessary for proper water flow within your dishwasher. This part helps prevent leaks and ensures that water is properly directed into the dishwasher.
Symptoms of a faulty water inlet funnel service kit include:
Causes of a bad water inlet funnel service kit can include wear and tear over time, blockage from debris or mineral buildup, or damage to the funnel or associated components. If you notice issues such as water leaks, inadequate water flow, or inconsistent cleaning results, it may be time to replace the old or damaged water inlet funnel service kit with this genuine OEM part.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Reduces drum vibration during spin cycles. Replace if washer shakes excessively or drum moves too much. Mounts between drum and base. Sold individually.
Replaced all 4 shocks, and 2 suspension springs. The overall fix was easy for the shocks which only require a quarter turn with a cresent wrench to replace. The suspension springs are more difficult because the bottom of the washer drum must be supported due to the substantial weight. I used a car jack to support the drum from the bottom and a long bunge wrapped around the main drive pulley. I.would not have been able to do this as a one person without it. While replacing the suspension parts,... Read more
Black plastic funnel extension attaches to the front of your refrigerator's ice dispenser. Replace if cracked, broken, or missing to reduce splashing.
Me and my husband fixed it. Thanks for the help. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.