Push Button Start Switch Parts
Genuine Ge part
By: Ge
Part Number: WH12X10065
Fix a washer that overfills or won't start the wash cycle. This water level pressure switch detects proper fill levels. DIY-friendly repair.
This part fixes the following symptoms
-
Will not fill with water
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Bad switch Daniele H. • Milford , CT • February 12, 2015
Hmm...watched video after reading on web of running water problem with GE washer....common fail
.....moving stuff to get to the washer took all the time, easy fix but a lot of screws to remove and looking time
APP site very good, will order again if need be thanks
Read more
More
$50.61
- Compare At:
-
$59.72
- You Save:
-
$9.11
Genuine Whirlpool part
By: Whirlpool
Part Number: W10818230
Replace a cracked, broken, or missing control knob on your range. This knob installs on the control panel shaft to adjust burner settings and oven temperature.
Do-It-Yourself Stories from Customers like You
My knobs on my range had broken Deborah L. • Baltimore , MD • April 14, 2020
By ordering my parts and they fit good.
Read more
More
$31.59
- Compare At:
-
$37.59
- You Save:
-
$6.00
Genuine Ge part
By: Ge
Part Number: WD21X23498
The Flood Switch is an OEM part for GE dishwashers. This critical component detects and prevents potential overflows by monitoring water levels within the dishwasher. When excessive water is detected, the flood switch signals the dishwasher to shut off water flow, preventing leaks and potential water damage.
Causes of a bad flood switch can include electrical failures, physical damage from debris, or wear and tear from repeated use. If the flood switch malfunctions, it may not properly detect water levels, leading to possible overflows or improper operation of the dishwasher.
Symptoms of a bad flood switch include:
- The dishwasher stopping mid-cycle
- Water not filling or overfilling the dishwasher
- Error codes related to water level issues
- Leaks around the dishwasher
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The dishwasher was not draining water. Sanford S. • Jericho , NY • January 23, 2022
Spoke to an appliance repairman who said it does not pay to fix and is too difficult
I had already ordered the parts.
So I called AppliancePartsPros.com.
They said no problem if I wanted to return parts
BUT the technician suggested that all appliances are repairable
I gave it a shot
I had to disconnect the dishwasher, same as if I was to replace it
Followed on AppliancePartsPros.com repair parts video and replaced the pump, inlet valve, and solenoid
all took about an hour and the dishwasher...
Read more
More
$11.49
- Compare At:
-
$13.67
- You Save:
-
$2.18
Genuine Ge part
By: Ge
Part Number: WR07X10084
Fridge clicking but not cooling? A faulty compressor start relay prevents startup. This part restores cooling in 15-20 minutes. Includes installation video.
Do-It-Yourself Stories from Customers like You
We had no power only lights on Frank A. • Smithtown , NY • January 28, 2022
GE refrigerator 12 years old and we love it. Ordered compressor overload and compressor start relay video's were great made the replacement easy. I also ordered the control board because I felt this was the real culprit again the video was the best. With all the parts replaced GE profile refrigerator has been working like new. Thank you AppliancePartsPro.com
Read more
More
$82.95
- Compare At:
-
$99.54
- You Save:
-
$16.59
Genuine Bosch part
By: Bosch
Part Number: 00165256
Dishwasher won't fill or keeps overfilling? The float switch detects water levels for proper filling and draining. Accessible repair in under 30 minutes.
This part fixes the following symptoms
-
overflowing
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Inlet valve would not open to let water into the dishwasher Kurt J. • Burnsville , MN • January 09, 2015
I checked continuity at the float switch since I knew the inlet valve was working when direct wired to 120v. Switch did not have continuity. Replaced switch and inlet valve worked at start of cycle.
Read more
More
$31.35
- Compare At:
-
$36.99
- You Save:
-
$5.64
Genuine Ge part
By: Ge
Part Number: WB24T10022
Burner not heating or stuck on? This surface element switch controls power to your cooktop burners. Common repair when heat won't adjust properly.
Do-It-Yourself Stories from Customers like You
Burner didn't work Larry W. • Aiea , HI • March 23, 2014
Replaced the switch infin by watching the video
Read more
More
$107.76
- Compare At:
-
$127.16
- You Save:
-
$19.40
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3395382
The Start Switch is an OEM replacement part for Whirlpool dryers. It is an electronic component responsible for initiating the heating elements and tumble cycles upon user command from the control panel.
Causes of a bad start switch involve general wear over extended use. Failure of the internal conducting surfaces interrupts circuit activation as well.
Symptoms of a bad start switch include:
- Heating elements or tumble cycles that will not engage properly
- Dryer fails to operate or stops mid-cycle unexpectedly
- Control panel appears non-responsive to selections
- Error codes related to ignition or power delivery faults
Note: This dryer push-to-start switch has 2 terminals.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric dryer models.
Do-It-Yourself Stories from Customers like You
Dryer wouln't start heard the timer working but the starter wouldn't start Perry B. • Stockton , CA • December 05, 2014
I replaced the starter switch, that really didn't need to be replaced, and the thermal fuse, which did.
Read more
More
$50.57
- Compare At:
-
$60.18
- You Save:
-
$9.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10420741
This push-to-start switch initiates the dryer cycle when the start button is pressed. It sends a signal to the motor and control circuit to begin tumbling and heating. Replace this switch if pressing the start button produces no response, the dryer only runs while you hold the button down, or the switch feels loose or does not click when pressed.
Do-It-Yourself Stories from Customers like You
The push start button didn't start the dryer Kirsten K. • Fayetteville , NC • July 21, 2016
I replaced the part i ordered and it worked great!
Read more
More
$27.37
- Compare At:
-
$32.84
- You Save:
-
$5.47
Genuine Frigidaire part
By: Frigidaire
Part Number: 134762010
Fix a washer that won't fill, overfills, or shows E35 error code with this water level pressure switch. Moderate DIY repair takes about 1-2 hours.
Do-It-Yourself Stories from Customers like You
E35 Michael B. • Mechanicsville , VA • September 13, 2016
Water valve not closing all the way. Water keep entering washer even with power cord unplugged. Parts I ordered fit perfect. Ordered on Thursday night , parts there Saturday. Great service and shipping. Thank
Read more
More
$45.95
- Compare At:
-
$60.39
- You Save:
-
$14.44
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304525746
Replacement control knob for gas cooktops. Installs on the control panel to adjust burner settings. Replace when cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Plastic knobs broke Cindy O. • Cotati , CA • September 27, 2021
Got new metal knobs, so much better!
Read more
More
$61.56
- Compare At:
-
$72.64
- You Save:
-
$11.08
Genuine Frigidaire part
By: Frigidaire
Part Number: 134844470
Replacement selector switch knob for washer dryer combo control panels. Installs on the control stem to select wash or dry cycles. Needed when cracked or broken.
Do-It-Yourself Stories from Customers like You
Start switch knob broke off. Jeff O. • Laurier , WA • March 07, 2018
I went online, ordered the part and installed it,,, took 15 minutes to install,,,saved huge $$$
easy peasy!! :-)
Read more
More
$53.95
- Compare At:
-
$63.66
- You Save:
-
$9.71
Genuine Ge part
By: Ge
Part Number: WB03X29315
Control knob for cooktop burner temperature adjustment. Installs on control shaft. Replace if cracked, broken, melted, or missing. Hard plastic construction.
Do-It-Yourself Stories from Customers like You
Required new knobs Rick M. • Katy , TX • September 03, 2019
Ordered replacement OEM
Read more
More
$24.95
- Compare At:
-
$29.69
- You Save:
-
$4.74
Genuine Frigidaire part
By: Frigidaire
Part Number: 297286812
This capacitor stores and releases electrical energy to help the refrigerator's compressor start and run smoothly. Replacing a weak or failed capacitor can restore reliable compressor startup and more consistent cooling performance.
- Provides the electrical boost/phase shift needed for compressor motor startup and steady operation
- Works with the start device to deliver proper current to the compressor
- Failure symptoms can include clicking or humming near the compressor, poor cooling, or short cycling
- May cause the compressor not to start after power interruptions when weak or failed
What's included: 1 capacitor Install notes:
- Disconnect power before servicing any electrical component
- Safely discharge the capacitor before handling; avoid touching terminals
- Note wire positions and terminal markings; transfer leads one at a time to the matching terminals
- Secure the capacitor in its mounting/bracket to prevent vibration damage
Do-It-Yourself Stories from Customers like You
Three year old Frigidaire upright freezer quit running. Kenneth B. • Crossville , TN • April 03, 2021
My barely three year old Frigidaire upright freezer quit running and we discovered it when most of the contents were just starting to thaw. Luckily we have nearby neighbors that my wife walks with most days and two or three of them came to our rescue with available freezer space to save the more valuable things like meat and seafood. The compressor would not come on, no fan, no noises of any kind but the light came on when the door was opened so obviously it had power. I unplugged it for a...
Read more
More
$8.95
- Compare At:
-
$10.65
- You Save:
-
$1.70
Genuine Ge part
By: Ge
Part Number: WH01X10313
Replacement control knob for washing machines. Installs on the control panel to select cycle and temperature settings. Needed when cracked or broken.
Do-It-Yourself Stories from Customers like You
Dryer was not heating on the timed dry side but heating on the other side of timer Iris H. • Canal Fulton , OH • February 22, 2015
Replaced the timer
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Whirlpool part
By: Whirlpool
Part Number: W11030413
Control knob for gas range burner heat settings. Mounts on the cooktop control panel. Replace if cracked, broken, paint is peeling, or worn from use.
Do-It-Yourself Stories from Customers like You
Broken range knob Lois D. • Sea Isle City , NJ • June 22, 2020
Replaced knob.
Read more
More
$54.25
- Compare At:
-
$64.02
- You Save:
-
$9.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10415450
Control knob for range burner heat settings. Installs on the control panel. Replace if cracked, broken, worn from heat exposure, or missing.
Do-It-Yourself Stories from Customers like You
One of the burners did not work Marc D. • Boxborough , MA • November 25, 2015
I replaced the burner valve which did not turn and therefore did not allow gas to flow.
Read more
More
$25.76
- Compare At:
-
$30.65
- You Save:
-
$4.89