U-Line Icemaker Parts

This refrigerator ice maker assembly automatically fills, freezes, and ejects cubes into the storage bin. Replace it to restore dependable ice production when the original unit stops making ice, won't harvest, leaks from the mold, or overfills. What it does

• Performs automatic fill, freeze, and harvest cycles to produce ice
• Controls water-fill timing for each cycle
• Stops ice production when the bin is full
• Common symptoms: no ice production, won't eject/harvest, overfilling or dripping from the ice maker, loud clicking/jammed ejector

• Ice maker assembly (1)

• Disconnect power and turn off the refrigerator's water supply before servicing
• Remove the ice bin/cover, unfasten mounting screws, and disconnect the wire harness
• Position the new assembly, align with the fill tube, reconnect the harness, and secure with screws
• Restore power and water; check for proper alignment and allow time for ice production to normalize

This ice maker assembly produces and harvests ice for compatible refrigerators, replacing a failed or damaged ice-making unit to restore normal ice production and cycling. Designed as a direct-replacement service part for units that use this OEM assembly. What it does:

• Forms, freezes, and harvests ice automatically as part of the freezer's ice-making cycle.
• Common symptoms it addresses: little or no ice production, ice maker not cycling, or ice trays not filling.
• Works with the refrigerator's water inlet and control signals to dump ice into the bin when ready.
• Replaces a defective ice-making module to stop intermittent operation or visible damage to the ice tray.

• Disconnect power and shut off the water supply before beginning replacement.
• Remove the ice bin and interior trim panels as needed to access the ice maker; keep track of mounting screws.
• Disconnect the wiring harness and water inlet tube carefully; avoid forcing connectors or pinch points.
• After installation, restore power and water, check for leaks, and run the ice-maker test/diagnostic cycle per the refrigerator's service instructions.

The Refrigerator Ice Scoop is an essential accessory for maintaining the functionality of your Samsung refrigerator. Crafted as a genuine OEM part, this ice scoop ensures a perfect fit and reliable performance with your appliance. Designed for ease of use, the scoop allows you to effortlessly retrieve ice from your freezer, enhancing your daily kitchen experience. Its sturdy construction provides durability, ensuring long-lasting use without compromising on quality. The ergonomic handle offers a comfortable grip, making it simple to scoop ice without spills or mess. By choosing the Refrigerator Ice Scoop , you are investing in a component that seamlessly integrates with your Samsung refrigerator, maintaining its original performance standards. This genuine OEM part not only restores the ice dispensing functionality but also helps in keeping your kitchen organized and efficient. Easy to install, the ice scoop is a practical solution for anyone looking to replace a worn or missing part, ensuring your refrigerator continues to operate smoothly and effectively.

This ice container catches and stores ice from the refrigerator icemaker so cubes stay contained and easy to access. Replacing a damaged bin restores tidy ice collection and prevents spills inside the freezer. What it does:

• Collects and stores ice produced by the icemaker, keeping cubes contained and accessible.
• Fits into the freezer icemaker housing to position under the dispenser or harvest area.
• Common symptoms indicating replacement: cracked or warped bin, ice spilling onto the shelf, or ice that won't stay contained.
• Durable plastic construction keeps ice sanitary and helps prevent unnecessary mess.

• Disconnect power to the refrigerator before starting to avoid injury.
• Empty the old ice and remove any retaining clips or fasteners, then slide the replacement bin into the housing until it seats.
• Do not force the bin into place; ensure the icemaker arm and related components clear the bin and that it sits level.

This replacement ice cube tray is a direct-fit plastic tray designed to hold and release ice cubes in compatible top- or bottom-freezer refrigerators. Restores convenient ice storage and simple manual ice removal. What it does:

• Holds water in separate cavities so ice cubes form evenly.
• Flexes slightly for easier ice release to reduce twisting or chipping.
• Replaces cracked, warped, or missing trays that cause leaking or uneven freezing.
• Helps prevent contamination from freezer debris when used as intended.

• Remove old tray and wipe area clean before installing the new tray.
• Fill tray with water on a level surface and place flat in the freezer to freeze.
• Handle carefully when removing ice to avoid spills; do not force with sharp tools.
• Clean tray before first use and as needed; follow refrigerator manufacturer's care guidance.

This Icemaker assembly replaces the refrigerator freezer icemaker to restore automatic ice production and delivery to the ice bin. It installs where the original icemaker mounts and reconnects to the existing water supply and wiring. What it does:

• Cycles through fill, freeze and harvest stages to form ice cubes and drop them into the bin
• Receives water from the inlet and meters fill volume to produce properly sized cubes
• Stops producing ice when the bin is full to prevent overflow or ice buildup
• Resolves common symptoms like no ice production, few or misshapen cubes, or an icemaker that won't cycle

• One icemaker assembly

• Disconnect power and water supply before starting any work
• Handle the ice bin and harness carefully; use basic hand tools for removal and reinstallation
• Follow model-specific service manual or OEM instructions for wiring and alignment
• After installation, restore power/water and run a test cycle to ensure proper operation

By Maytag. Engineered to replace the timer controlled 12 and 24 cube style flex tray ice makers used by Admiral, Maytag, Magic Chef, Crosley and some Montgomery Ward refrigerators before 1990. Includes ducts, fill tube and related hardware. Replacement only, not for brand new installations.

This ice maker assembly replaces the refrigerator's frozen-water harvesting unit so your fridge can produce and eject ice reliably. Designed as a direct replacement to restore normal ice production and harvesting cycles. What it does:

• Automatically fills with water, freezes, then cycles to harvest ice cubes into the bin
• Uses the built-in thermostat and motorized ejector to release formed ice
• Restores ice production when the original ice maker is no longer cycling or is producing little to no ice
• Can stop ice leaks and erratic harvesting caused by a failed ice maker mechanism

• Disconnect power and turn off the water supply before beginning work
• Handle the unit and electrical connector carefully to avoid damage to the harness
• Install with OEM mounting points; ensure the ice maker is level and securely fastened
• After installation, restore power/water and run a test cycle to confirm proper fill and harvest

The Ice Maker Field Install Kit is an OEM replacement part for Whirlpool side-by-side (SXS) refrigerators. This kit provides all the components necessary to add or replace an ice maker in compatible refrigerator models. It is designed to produce a steady supply of ice cubes, enhancing convenience and functionality for users.

Symptoms of a bad Ice Maker or the need for installation include:

• Ice maker not producing ice or producing insufficient quantities
• Leaks or water pooling near the ice maker
• Loud or unusual noises during operation
• Visible damage or wear to the ice maker components

Causes of a malfunctioning Ice Maker can include mineral buildup from hard water, wear on internal components like the motor or ejector blades, or issues with the water supply line. Regular maintenance and proper installation help extend its lifespan.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Icemaker is an OEM part for GE refrigerators. It is designed to produce ice cubes by automatically filling the ice mold with water, freezing it, and then ejecting the ice into the ice bucket. This part ensures a steady supply of ice for your household needs.

Causes of a bad icemaker can include mechanical wear and tear, electrical failures, or issues with the water supply. Over time, the icemaker’s components can degrade, leading to inconsistent ice production or complete failure.

Symptoms of a bad icemaker include:

• No ice production
• Small, misshapen, or hollow ice cubes
• Ice maker not ejecting ice
• Unusual noises from the ice maker

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Maker is an OEM part for Whirlpool bottom freezer refrigerators. Located inside the fresh food door compartment, it is designed to automatically produce batches of ice to ensure plenty of chilled water, drinks, and snacks. This ice maker features adjustable settings to meet daily needs.

Symptoms of a failing ice maker may include:

• Reduced ice production or intermittent cubes   
• Ice clumping together instead of separate pieces
• Ice maker mechanism continually running

Causes relate to normal wear of moving parts over years of use among harsh temperature fluctuations inside the fresh food door. Mineral buildup can also interfere with sensitive components.  

This OEM Whirlpool replacement fits many Whirlpool, KitchenAid, and other major brand refrigerators.

The Ice Bucket is an OEM part for GE refrigerators. It is a component that stores ice from the icemaker in the freezer compartment. The ice bucket allows for convenient access to ice on demand, fitting seamlessly within the refrigerator design.

Symptoms of a bad ice bucket include:

• Cracks or damage to the plastic material
• Inability to easily remove or insert the bucket  
• Ice falling out of the bucket improperly
• Missing parts like the handle

Note: This is just the ice bucket. It does not include other ice maker components.

Replace your worn ice bucket before further issues arise like ice spilling in the freezer. This OEM GE part restores your refrigerator’s storage and access to ice. It is also compatible with Hotpoint, RCA, and Kenmore refrigerators.
 

The Icemaker is an OEM component for Whirlpool refrigerators. It is responsible for automatically producing batches of ice using a process of freezing water into cube form. The icemaker works closely with the freezer compartment and water supply line to fulfill its ice-making function.

Causes of a bad icemaker can include issues with the refrigeration system like improper temperatures, clogging or damage preventing water flow, or component malfunctions within the icemaker itself. 

Symptoms of a faulty icemaker are:

• Failure to produce ice cubes
• Sparse or chunky/oddly shaped ice output 
• Leaks or water pools in the freezer
• Strange noises or smells coming from the icemaker area
• Error codes displayed regarding icemaker performance  

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.
 

This replacement ice cube pan holds and organizes ice in your refrigerator's freezer. Replacing a cracked or warped pan restores clean, contained ice storage and smoother access or dispensing, depending on your model's design. What it does:

• Collects and stores ice produced by the icemaker or manual trays
• Keeps cubes contained and easy to access; fits designated guides in the freezer
• Helps ensure proper ice access or dispensing on applicable models
• Typical symptoms: cracked bin, broken tabs, bin won't seat, ice spilling or clumping

• 1 ice cube pan/bin

• Disconnect power to the refrigerator and turn off the icemaker before starting
• Remove the old pan and empty any remaining ice
• If your model reuses a drive/crusher or other hardware, transfer those parts from the original pan as directed for your unit
• Seat the new pan fully in its tracks/coupler, restore power, and allow normal ice production

This automatic refrigerator ice maker assembly molds water into cubes and ejects them into the bin, restoring steady ice production. Replace a failed icemaker that no longer cycles, fills with water, or ejects cubes reliably.

• Freezes water in its mold and harvests finished cubes into the ice bin
• Controls the fill, freeze, and harvest sequence for automatic ice making
• Works with the refrigerator's controls to start/stop ice production as designed
• Common symptoms: no ice or low ice volume; won't fill; cubes won't eject; unit stalled mid-cycle

• Disconnect power and shut off the water supply before servicing
• Remove the ice bin; loosen mounting screws; unplug the wire harness; lift out the old assembly
• Transfer any brackets, covers, or fill cup from the original unit if required
• Align with the fill tube; secure screws; reconnect harness; restore power and water; allow up to 24 hours for full ice production