Dent Remote Filter Parts

Reduces odors from onions, garlic, fish, and spoiled food using activated carbon and baking soda. Replace every 6 months for fresh air. Confirm fit by model.

Vertical flipper mullion assembly mounts to fresh-food door and pivots to seal center gap between French doors. Replace if cracked, broken, or rusting.

The Water Filter Bypass is an OEM replacement part for Frigidaire refrigerators. It provides an alternative water supply route to bypass the refrigerator's built-in water filtration system. The bypass allows refrigerator water and ice dispensers to operate without water flowing through the installed filter cartridge. 

Causes of a malfunctioning bypass can include mineral buildup inhibiting proper operation of the bypass valve, worn seals or O-rings not providing a tight seal or physical damage.  

Symptoms include:

• Inability to bypass the water filter when needed  
• Leaks from the bypass area
• The filter bypass not functioning or engaging properly

This OEM replacement is also compatible with refrigerator brands like Electrolux, Gibson, Kelvinator, and select Kenmore models.

Grease and odor filter for range hoods and over-the-range microwaves. Dimensions: 8-3/4" x 10-1/2" x 7/16" (8.75 x 10.5 x 0.4375). Rectangle shape. Captures grease and removes cooking odors from cooking air. Replace when clogged, discolored, or every 6-12 months.

Traps grease and particles from kitchen air in your range hood. Replace when visibly clogged or every 3-6 months for optimal performance. Verify fit.

Captures grease, smoke, and odors from your range's downdraft vent. Replace when saturated or damaged. Clean monthly with hot soapy water. Confirm fit.

The Mullion Heater is an OEM part for Bosch refrigerators. It is designed to prevent condensation from forming on the refrigerator door mullion, the vertical divider between the doors. This heater ensures that the mullion stays warm enough to stop moisture from condensing and causing potential water damage or mold growth.

Causes of a bad mullion heater can include electrical failures, wear and tear from continuous use, or manufacturing defects.  

Symptoms of a bad mullion heater include:

• Visible condensation or frost on the door mullion
• Water pooling or dripping around the door area
• Increased humidity inside the refrigerator
• Mold or mildew developing near the door seal

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Screens air and captures odors and particles in your room air conditioner. Replace when clogged to maintain proper airflow. Confirm fit with your model.

Absorbs grease, smoke, and cooking vapors to maintain clean kitchen air. Replace when clogged or airflow decreases. Verify fit with your model number.

The Grease Filter is an OEM replacement part for Whirlpool range hoods. It measures about 16 inches wide by 3 inches high.This filter traps grease particles from the air during cooking, helping to keep your kitchen cleaner and your range hood functioning efficiently. It is designed to be durable and easy to remove for cleaning or replacement.

Causes of a bad Grease Filter can include prolonged use without regular cleaning, which leads to clogging from grease buildup. Damage can also occur from repeated exposure to high heat or improper handling during maintenance.

Symptoms of a bad Grease Filter include:

• Reduced airflow or ventilation performance
• Excessive grease accumulation on kitchen surfaces
• The filter appearing warped, clogged, or damaged

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Keep your microwave's ventilation performing its best. This replacement air filter helps screen cooking vapors before the air is recirculated or exhausted, restoring proper airflow and helping maintain cleaner, more effective ventilation.

• Filters air drawn through the microwave's ventilation system during cooking
• Helps reduce cooking odors and airborne particles in the exhaust stream
• Supports proper airflow and fan performance for effective venting
• Replace when saturated, damaged, or visibly dirty; do not operate without required filters
• Common signs of a spent filter: persistent odors, weaker ventilation, or a discolored/brittle filter

• Disconnect power by unplugging the unit or switching off the circuit breaker before service
• Access the filter from the underside panel or top/front grille, per your model
• Note the old filter's orientation; install the new filter the same way and secure any tabs or screws
• Ensure all panels/grilles are reinstalled securely before restoring power

This is an internal filter assembly that sits in the bottom of the dishwasher tub to trap food particles and debris during the wash and drain cycles. It prevents food waste from recirculating onto clean dishes or clogging the drain pump. Replace this filter if dishes come out with food residue, the dishwasher has a foul odor, or water is not draining properly.

Grease filter for range hoods and over-the-range microwaves. Dimensions: 5-1/16" x 7-5/8" x 3/32" (5.0625 x 7.625 x 0.09375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.

Carbon filter for range hoods and over-the-range microwaves. Dimensions: 6-3/8" x 6-7/8" x 3/8" (6.375 x 6.875 x 0.375). Rectangle shape. Removes cooking odors from cooking air. Replace when clogged, discolored, or every 6-12 months.

Vessel water filter that replaces the refrigerator's vessel-style cartridge to restore filtered water delivery and reduce visible particles, off tastes and odors at the dispenser and ice maker for clearer, better-tasting water. What it does:

• Filters water flowing through the vessel cartridge to reduce sediment and visible particulate in dispenser output.
• Helps improve taste and odor commonly noticed when a filter is aged or clogged.
• Addresses symptoms such as discolored water, stray particles in dispensed water, or unpleasant dispenser/ice taste.
• Restores expected filtration performance when an old or saturated vessel cartridge is the source of water-quality complaints.

• Turn off the refrigerator water supply and before beginning replacement.
• Remove the old vessel cartridge per OEM instructions and install the new filter in the same orientation.
• After installation, run the water dispenser until the water runs clear to purge air and any loose media.
• If you see leaks or continue to have water-quality or flow issues after replacement, shut off the water.

Clear plastic door cover for the dairy or butter compartment on your refrigerator door. Replace cracked, broken, or missing lids. Installs in minutes.