Hardware Hand Small Engine Flywheel Key Parts
Genuine Lg part
By: Lg
Part Number: 1TTL0402818
Truss head tapping screw secures panels, brackets, and covers in appliances. Replaces missing or damaged fasteners to restore snug fit and alignment.
Do-It-Yourself Stories from Customers like You
Broken door handle on lg over range microwave William M. • Town Creek , AL • June 29, 2017
Removed old broken door handle per video link on AppliancePartsPro.com. Installed new handle with no issues. <10 minute job at best.
Read more
More
$11.45
- Compare At:
-
$13.63
- You Save:
-
$2.18
Genuine Frigidaire part
By: Frigidaire
Part Number: 318246702
Installation tool for mounting built-in microwave ovens. Required for proper alignment during install. Replace if missing, damaged, or worn from use.
Do-It-Yourself Stories from Customers like You
No heat bottom coil shorted out and replaced still no heat Kirk K. • Brockton , MA • April 18, 2015
As described, thanks your helped repair what the repairman would not or could not do..
Bottom element shorted and burned up from previous homeowner, not sure why or how?
Replaced both heating elements, still no heat, the clock controller was also damaged due to the shorting even though it appeared to work OK, just no heat.
Replaced clock/controller , both elements and the temp sensor .ALL WORKING !!!
Lots of scrubbing and now have a "new" oven.!
Half the cost of the serviceman,
Saved my oven...
Read more
More
$12.53
- Compare At:
-
$13.78
- You Save:
-
$1.25
Genuine Whirlpool part
By: Whirlpool
Part Number: W11676351
This is a replacement screw used to secure panels, trim, or small components on compatible Whirlpool appliances. Installing the correct fastener restores proper fit and helps stop rattles or loose trim. What it does:
- Secures trim, panels, or control components to prevent movement and rattling
- Replaces missing or damaged hardware that can cause gaps or loose parts
- Helps maintain proper alignment of panels and movement-free operation
- Used wherever a factory screw of this size and head style is specified
What's included: One screw Install notes:
- Always disconnect power (and water, if applicable) before servicing the appliance
- Use the correct screwdriver or driver bit to avoid stripping the head
- Install by hand until threads engage, then tighten snugly—do not overtighten
- Keep removed hardware organized before final reassembly
Do-It-Yourself Stories from Customers like You
Igniter was lighting but gas wouldn't ignite Timothy G. • Lumberton , NJ • December 21, 2014
Igniter was lighting but gas wouldn't ignite. I would see the igniter light up and smell some gas, but the flame would not light. After looking at some websites, it seemed that the igniter was weak and wouldn't cause ignition, even though it was glowing. Since the part numbers were the same, I switched the broiler and the oven igniters. The oven began working and the broiler wouldn't light. So, I ordered the new part (igniter) and replaced the broken one.
I had to pull the oven away from...
Read more
More
$13.95
- Compare At:
-
$15.42
- You Save:
-
$1.47
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10140858
This access door key operates the factory lock on select appliances. It replaces a lost or worn key so you can securely lock or unlock the access door and restore normal, controlled access to the compartment.
- Locks or unlocks the access door via the built-in lock cylinder
- Restores function when the original key is missing, bent, or broken
- Helps resolve situations where the door can't be opened or secured due to a worn key
- Maintains restricted access to the compartment when needed
What's included: 1 key. Installation notes:
- Verify this key matches your model's lock; keys are not universal
- Insert fully and turn gently—do not force a stuck lock
- If the lock cylinder is damaged or seized, replace the lock assembly
- Disconnect power if removing the door or servicing internal components
Do-It-Yourself Stories from Customers like You
Sticking buttons on dryers George M. • Portland , ME • October 25, 2016
Took less than half an hour to complete repair. Saved $100 service call!!
Read more
More
$18.23
- Compare At:
-
$21.69
- You Save:
-
$3.46
Genuine Ge part
By: Ge
Part Number: WB01K10093
This speed nut is a clip-on fastener that provides threads for a screw on the appliance. It secures sheet-metal panels, brackets, or trim and helps keep assemblies tight under vibration and repeated use.
- Provides captive threads so a screw can tighten into thin sheet metal
- Helps secure panels, brackets, and trim pieces in place
- Replace if a screw spins without tightening, a panel rattles/feels loose, or the original clip is missing or damaged
- Restores a snug, reliable attachment point without a loose nut
What's included: One speed nut Install notes:
- Disconnect power and, if applicable, shut off gas; allow the appliance to cool before servicing
- Note the clip's orientation; slide it onto the panel edge or stud as designed
- Start the screw by hand to avoid cross-threading; do not overtighten
- Wear cut-resistant gloves when handling sheet-metal parts
More
$9.91
- Compare At:
-
$10.90
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WE21X26838
Supports the dryer drum and allows smooth rotation. Replace if cracked, worn flat, or causing the drum to wobble. Installs on the axle at rear or front.
More
$33.95
- Compare At:
-
$40.06
- You Save:
-
$6.11
Genuine Frigidaire part
By: Frigidaire
Part Number: 316069301
Secures the gas burner assembly to the cooktop base. Replace stripped, rusted, or missing screws to eliminate burner wobble and maintain proper alignment.
Do-It-Yourself Stories from Customers like You
Igniter housing attachment corroded away John V. • East Quogue , NY • January 13, 2017
The constant cooking and age of the appliance I repaired corroded the housing attachment that holds the igniter in place to the burner. Also the screws that hold the burner in place to the stove cover were also corroded which caused the burner itself to not stay in place but fall into the stove. By using a screw driver, lift up on the sides of the stove cover to pop the clips that hold it in place. Use a block of wood to hold up the stove cover. On the model I worked on, the igniter removes...
Read more
More
$5.74
- Compare At:
-
$5.89
- You Save:
-
$0.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304451561
Replacement mounting screw secures panels, trim, and components in microwaves. Needed when original screws are stripped, missing, or lost during repairs.
Do-It-Yourself Stories from Customers like You
The handle to my microwave was broken off David M. • Auburn , MA • May 09, 2018
I ordered a replacement handle from Appliance Parts Pro.com and installed it after watching the video at their site for a similar model. The video told of the trick on removing the door surround that allowed me to access the handle screws. I purchased new handle screws at the same time I bought the new handle. The new handle and screws were a bit different than the original but fit perfectly. Hopefully it will be more durable than the original handle.
Read more
More
$13.78
- Compare At:
-
$15.54
- You Save:
-
$1.76
Genuine Ge part
By: Ge
Part Number: WB01X23501
Genuine Ge part
By: Ge
Part Number: WB02T10324
6-20 x 3/8 inch nickel screw secures trim panels, brackets, and small components in dishwashers and ovens. Replace missing or stripped screws.
Do-It-Yourself Stories from Customers like You
Faceplate coming loose on GE oven. Phillip S. • Tulsa , OK • November 10, 2021
Replaced all of the control parts for the GE oven.
Read more
More
$9.88
- Compare At:
-
$11.41
- You Save:
-
$1.53
Genuine Ge part
By: Ge
Part Number: WZ5X219D
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303324184
Fastens panels, brackets, and covers inside your range or oven. Replace this screw if missing, stripped, or rusted to secure components properly.
Do-It-Yourself Stories from Customers like You
Door on our gas oven wouldn’t close completely Billy W. • Brookhaven , MS • January 05, 2024
I replaced the spring hinges on the door without any issues. The parts I ordered were perfect and easy to install.
Read more
More
$13.54
- Compare At:
-
$14.89
- You Save:
-
$1.35
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304414648
Replacement mounting screw that secures panels, trim, and components in ranges and ovens. Needed when original screws are lost, stripped, or damaged.
More
$13.54
- Compare At:
-
$14.89
- You Save:
-
$1.35
Genuine Ge part
By: Ge
Part Number: WB01K10091
Panel mounting screw secures trim, bezels, and internal components on ranges and cooktops. Replace when stripped, corroded, or missing to restore fit.
Do-It-Yourself Stories from Customers like You
Lower oven would not ignite. Gary P. • Randolph , NJ • March 19, 2017
Replaced the ignitor glow bar and deflector oven (which had a hole burned through it). Screws stripped upon disassembly of original deflector oven and needed to be replaced as well.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB01T10104
Specs: 8-32 MCH PNT15
Do-It-Yourself Stories from Customers like You
Bad igniter switch on stove Brent W. • Alamo , CA • January 08, 2016
I was able to replace the switch harness with the new one. It was fairly simple and straight forward. I usually take a photo of the scene before I start so I have a reminder as to where everything goes if I get distracted. Also gave me an opportunity to clean the stove parts.
Read more
More
$9.88
- Compare At:
-
$10.87
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WB1X5731D
Includes 12 screws.
Do-It-Yourself Stories from Customers like You
Broken front glass door Roni T. • Sayreville , NJ • February 12, 2019
I was very pleased to get the glass on time and it was a perfect match. The only thing I had trouble was to get the screws required to fix. The screws were not available, so spend too much time trying find equivalent screws in homedepot.
Read more
More
$25.74
- Compare At:
-
$30.89
- You Save:
-
$5.15