Furnace Flame Sensor Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP303896
The dryer hi-limit thermostat is a safety device that prevents overheating by shutting off the heating element when temperatures get too high, located on the blower housing or heat source. Replace when clothes take too long to dry, the dryer shuts off prematurely, or when you notice inadequate heat production.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
More
$63.65
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4451354
Oven won't heat after self-clean? This thermal fuse protects your oven from overheating. Replacement takes about 1 hour with basic tools. Video guide included.
Do-It-Yourself Stories from Customers like You
Our son tried to do us a favor by using the selfclean feature on our oven while we were out of town this caused one or more internal fuses to blow Daniel A. • Magnolia , TX • May 13, 2017
Not sure which fuse might be bad, I ordered all three. The oven is almost twenty years old, so I figured it couldn't hurt to replace them all. The breakers marked oven were tripped, so we figured everything was off. Wrong! The 220 and the 120 are separate breakers. We found this out the old fashioned way, we got shocked.
Anyway, the fix is pretty simple. Take off decorative trim. Only one screw on each side holds it on. Remove four screws securing oven to cabinet, and slide oven out. Our oven...
Read more
More
$36.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10638608
This protective fuse safeguards the appliance's electrical circuit. When an overcurrent or short occurs, it opens the circuit to cut power and help prevent damage. Replacing a blown fuse can restore power once the underlying issue is corrected.
- Opens the circuit when current exceeds its design limit or a short is detected
- Helps protect control and other internal components from electrical damage
- Typical symptoms of a failed fuse include no power, dead display/controls, won't start, or immediate power loss
- An underlying electrical fault is likely present and should be diagnosed
What's included: 1 fuse Install notes:
- Disconnect power at the breaker or unplug the appliance before servicing
- Replace only with the exact type and rating specified for your model; never bypass or upsize a fuse
- Inspect wiring and components for the root cause of the blown fuse before restoring power
- If servicing a microwave, follow the service manual and discharge the high-voltage capacitor; consider service due to shock risk
Do-It-Yourself Stories from Customers like You
No power to oven Janet M. • Neosho , MO • January 20, 2019
Changed two computer boards first and didnt fix it. Fuse was the last ditch effort. Fixed it!@@
Read more
More
$16.45
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 316217005
Fix F10 or F30 error codes and inaccurate oven temperatures with this internal temperature sensor. Monitors heat levels for consistent cooking.
Do-It-Yourself Stories from Customers like You
F10 and f30 Jean A. • Pasadena , CA • July 20, 2015
I replace the resistance temperature detector a person helped me with a chat while I was looking for the part and she found it online and I ordered it .
Read more
More
$64.23
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 318647300
Microwave won't turn on or has no power? This fuse and holder assembly restores overcurrent protection when a blown fuse interrupts operation.
More
$160.53
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Lg part
By: Lg
Part Number: 6322FR2046H
Fix TE error code on your washer with this thermistor temperature sensor. Restores accurate temperature sensing and reliable cycle control.
More
$59.74
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Lg part
By: Lg
Part Number: 6322W2A001A
Thermistor is a temperature-sensing replacement that monitors refrigerator and freezer temperatures so the control board can regulate cooling. Replacing a faulty thermistor restores accurate temperature readings and helps stabilize cooling performance. What it does:
- Senses interior/evaporator temperature and sends a signal to the control board for temperature regulation.
- Helps prevent erratic cooling, long run-times, or inconsistent compartment temperatures when operating correctly.
- Faulty thermistors can contribute to excessive frost, failed defrost cycles, or compressor cycling issues.
- Use when the existing sensor fails to report correct temperatures or the part number matches.
What's included: One thermistor sensor. Install notes:
- Always disconnect power to the appliance before servicing to avoid shock or damage.
- The sensor is typically mounted on or near the evaporator or inside a cabinet wall; access may require removing panels or covers.
- Handle the sensor and wiring harness gently; avoid pulling on wires or bending the sensor element.
Do-It-Yourself Stories from Customers like You
Microwave would not microwave Richard E. • Cape Coral , FL • January 05, 2020
Replaced the Humidity sensor, Thermistor and door switches. I replaced these thinking the problem was one of the items but didn't want to trial and error one part at a time. Plus the cost was reasonable so if these didn't help I wasn't out a lot of money. I sense the door switch was the problem. Replaced all items and the microwave works great. Thanks for the advice and the cost of the parts.
Read more
More
$34.79
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Samsung part
By: Samsung
Part Number: DA47-10160H
Fix frost buildup on evaporator coils or warm fridge temps. This defrost thermostat regulates defrost cycle temperature. DIY-friendly, 20-30 min install.
Do-It-Yourself Stories from Customers like You
The freezer went warm evaporator frozen James B. • Palm Bay , FL • June 09, 2016
I unplugged the unit. Let the evap thaw. Measured with an ohm meter the temp sensor, defrost sensor and evap heaters. Defrost sensor measured completely " closed". Put sensor into hot water and ice, the reading never changed. Ordered sensor from AP PROS, got the part extremely fast, installed part, freezer was making ice in an hour.
I did a lot of online research, too.
Thanks, AP PROS!
Freezer only down 3 days. Fridge side working.
Read more
More
$95.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: R0131454
Fix frost buildup and poor cooling in your refrigerator. This defrost thermostat prevents ice accumulation on the evaporator. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
The frost was building up on the evaporator and the freezer wasn't cooling very well Rex W. • Sheridan , WY • March 24, 2015
I removed the shelves and the shelf holders, took the back panel off, loosened the evaporator. Removed the heater element and the thermostat. Re-installed the evaporator the back panel, shelve holders and shelves. Then I located the defrost timer in the refrigerator.
Read more
More
$74.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: R9900489
Fix a dryer that won't heat or stops mid-cycle with this thermal fuse and thermostat kit. Restores overheat protection. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
My dryer wouldn't heat up Margaret C. • Willcox , AZ • December 15, 2016
Ordered the thermostat and therma fuse from AppliancesPartsPros.com and replaced them.
Read more
More
$77.47
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-1096
Dryer won't heat or overheats? This high limit thermostat cuts power when temperatures get too high. Common fix for no-heat issues. Easy install.
Do-It-Yourself Stories from Customers like You
Our Maytag gas dryer was not producing heat— specifically it was cycling off after initially lighting Timothy E. • Bellvue , CO • September 15, 2019
When I pulled out the dryer from the wall, I could see dust/lint had accumulated everywhere and the vent system was compromised. I vacuumed up the dust/lint accumulation outside and then inside the vent system. I then opened the lower cabinet to clean and check its condition. I removed the water steamer bottle and its sub-assembly and then the drum. After cleaning and inspecting components — both visually and with a multi-meter I determined the problem was the appliance doing what it was...
Read more
More
$54.25
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10483239
Fix a dryer that won't heat with this thermostat. Regulates heating element temperature to prevent overheating. Moderate DIY repair in under an hour.
Do-It-Yourself Stories from Customers like You
Dryer would not heat David C. • The Dalles , OR • January 08, 2020
Replaced the heating element, which came complete with the two thermostats, wiring harness, and the mounting plate. Installed the new element unit, plugged in the dryer and tested to be sure the new element worked.
Read more
More
$107.48
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY504514
Dryer won't heat or stops when hot? A faulty cycling thermostat disrupts temperature regulation. Testing with a multimeter confirms the issue.
Do-It-Yourself Stories from Customers like You
Kept blowing the thermal fuse Bobby G. • Springfield , MO • November 07, 2016
I replaced both the cycling thermostat and the hi limit thermostat along with a new thermal fuse and it seems to have fixed the problem. I thought it might be one of the thermostats but they both had continuity so I decided one of them must be faulty in some way so I just replaced both of them.
I was very pleased with the prices and the quick shipping from Appliance Parts Pros. The parts were at my house in only a day and a half from when I ordered them.
Read more
More
$77.23
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W11208292
This sensor detects moisture and temperature levels inside the microwave cavity during cooking. It communicates with the control board to regulate automatic cooking and sensor reheat cycles. Replace this part if the microwave fails to properly detect doneness, overcooks or undercooks food on sensor settings, or displays a sensor error code.
More
$77.52
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233913
This temperature sensor monitors refrigerator temperature and sends readings to the control board so the appliance can regulate cooling. Replacing a failing sensor restores accurate temperature feedback for reliable cooling performance. What it does
- Measures internal temperature and reports it to the refrigerator control board
- Helps the system cycle the compressor and fans correctly for stable temperatures
- Commonly linked to symptoms like poor cooling, frequent compressor run, or temperature-related error codes
- Works as the sensing element for automatic defrost and temperature-control routines
What's included
- One temperature sensor (thermistor) with attached lead
Install notes
- Disconnect power to the appliance before servicing to avoid shock or damage
- Handle the sensor and wiring gently; secure the lead per factory routing to avoid contact with moving parts
- May require basic hand tools and access to the evaporator/thermostat area
More
$79.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB18X10126
This temperature thermistor is the sensor that lets the control board monitor and regulate appliance temperature for reliable cooling performance. Replacing a failing thermistor can restore proper temperature control and cycling. What it does:
- Senses internal temperature and sends readings to the control board
- Helps the compressor, fans, and defrost system run at the right times
- Commonly linked to symptoms like incorrect temperatures, overcooling, or frequent on/off cycling
- A faulty thermistor can cause improper defrost timing or erratic cooling behavior
What's included: One thermistor Install notes:
- Disconnect power before inspecting or replacing the sensor to avoid shock
- Handle the sensor and wiring connector gently to avoid damage
- Mount the sensor in the original location and secure wiring per OEM routing
More
$60.52
IN STOCK
Most orders arrive by Wednesday, November 25