Object Stack Blower Wheel Parts

This is a fan blade designed for the condenser section of a room air conditioner. It mounts on the condenser fan motor shaft and draws air across the condenser coils to dissipate heat from the refrigerant. Replace this blade if it is cracked, warped, or missing fins, which can cause the unit to run loudly, overheat, or fail to cool properly.

This small drive motor rotates the turntable plate inside the microwave to ensure even heating of food. It connects to the turntable coupler beneath the glass tray and spins at a slow, steady speed. Replace this motor if the turntable stops rotating, turns intermittently, or makes grinding noises during operation.

This is a threaded leveling leg assembly that screws into the base of a washing machine. It allows you to adjust the height at each corner to keep the appliance stable and level on the floor. Replace this part if the leg is stripped, broken, or if your washer vibrates excessively or walks across the floor during the spin cycle.

Fixed rollers with leveling screw for the left hand side. For right side, order part 241889001.

This is a slide rail and roller assembly that mounts on the right side of the dishwasher tub to support and guide the cutlery or dishrack as it slides in and out. The rollers allow the rack to move smoothly along the track. Replace this assembly if the rack is difficult to slide, feels wobbly, or the rollers are cracked, worn, or no longer turning freely.

This Support (mounting bracket) secures internal components and stabilizes the appliance's assembly to help prevent sagging, misalignment and excess vibration. It's a small replacement that restores proper fit and reduces rattling. What it does:

• Provides a stable mounting point for panels or internal assemblies
• Keeps components aligned to prevent binding or wear
• Reduces noise caused by loose or sagging parts
• Helps stop intermittent contact or rubbing that can cause rattles

• Disconnect power (and water, if applicable) before servicing
• Access may require removing outer panels or trim; keep track of fasteners
• Support the assembly while replacing the bracket to avoid strain

This small roller supports and allows smooth sliding of a storage basket or drawer inside the refrigerator or freezer compartment. It mounts to the interior frame or rail and reduces friction so drawers glide in and out easily. Replace this roller if your basket sticks, wobbles, or no longer rolls smoothly, or if the roller appears cracked or worn.

Replacement wheel that guides and supports your dishwasher's sliding rack. Install when the original roller is cracked, broken, or missing to restore smooth movement.

If your dryer takes too long or overheats, a worn blower wheel may be reducing airflow. This assembly restores proper air circulation through the drum.

Replacement tub wheel that mounts inside the dishwasher to support the rack track. Restores smooth gliding when worn, cracked, or broken during use.

This replacement leveling screw secures and adjusts an appliance's leg so the unit sits level and stable on the floor. Restores proper tilt for even door operation and stable performance. What it does:

• Replaces a worn or damaged leveling screw used to raise or lower an appliance leg
• Helps stop rocking, reduce vibration, and keep doors aligned
• Common fix when an appliance tilts forward/back or is uneven on the floor
• Works with the corresponding leveling leg/assembly to set final height

• Support the appliance before adjusting or removing leveling hardware to prevent tipping
• Use appropriate hand tools; tighten securely but avoid over-torquing
• No electrical disconnection is typically required, but unplug if working near electrical components
• If the leveling leg assembly is damaged, replace the entire leg/assembly per manufacturer instructions

This cooling fan is located inside the range and circulates air to prevent overheating of internal components. Replace when you hear unusual noises, the oven overheats, or the fan doesn't operate during cooking.

Rear wheel support that guides and stabilizes the dishwasher rack as it slides. Replace if cracked, broken, or worn to restore smooth gliding motion.

Upper dishrack roller kit for dishwashers. Includes 2 wheels per package. Replace worn, cracked, or broken rollers that prevent smooth rack gliding.

Tension roller for dryers. Mounts to the support bracket to maintain proper belt tension around the drum. Replace if worn, squeaking, or damaged.

This rotating component is mounted on the motor shaft inside the range hood and moves air through the ventilation system. Replace when the hood produces reduced airflow, makes excessive noise, or fails to clear cooking smoke and odors effectively.