Timer Knob Parts

This replacement surface burner knob is designed for the dual burner control. It restores positive, precise control so you can turn the dual burner on and adjust heat after the original knob becomes cracked, stripped, or missing.

• Attaches to the dual-burner control shaft to turn the burner on and adjust heat level
• Common symptoms: knob cracks, slips or spins without turning the control, feels loose/wobbly, or is missing
• Specific to the dual burner location—using a different position's knob may not align or function correctly
• Restores normal control feel and appearance

• Ensure all burners are off and cool; disconnect power to the appliance to prevent accidental activation while working
• Pull the old knob straight off the control shaft; avoid prying that could damage the control
• Align the new knob with the shaft in the OFF position, then press straight on until fully seated
• Verify smooth operation across the full range of settings

Timer dial assembly that replaces a damaged or worn selector on the control panel, restoring clear, reliable cycle selection and easy manual control without replacing the entire timer mechanism. What it does

• Provides the tactile selector that mounts to the timer shaft so you can set and advance appliance cycles.
• Restores smooth, positive rotation and visible cycle position markings for accurate selection.
• Replace when the dial is cracked, stripped, loose, missing, or spins without turning the timer.
• Improves usability and appearance of the control panel when original dial is worn.

• Disconnect power to the appliance before beginning any repair to prevent shock or injury.
• Access typically requires removing the control knob or front control panel; follow for correct disassembly.
• Handle control shafts and nearby wiring carefully; test dial function and run a short cycle after reassembly to ensure proper operation.

Restore smooth, accurate control with this replacement control knob. It fits onto the selector or timer shaft so you can choose cycles, temperatures, or time and replace a cracked, stripped, loose, or missing knob.

• Attaches to the control shaft to operate a switch, timer, or thermostat
• Provides a secure grip for selecting cycle, temperature, speed, or time
• Resolves issues like free-spinning, slipping, or knobs that won't stay on
• Helps when settings can't be adjusted due to a damaged or missing knob

• Disconnect power before servicing to prevent accidental start
• Pull the old knob straight off; avoid twisting the control shaft
• Align the new knob with the shaft and press firmly until fully seated
• If your original knob had a removable insert/retainer, transfer it to the new knob

The Knob is an OEM part for Whirlpool electric ranges. It provides tactile control of the temperature and function settings. These stove knobs must withstand constant exposure to heat and require durability.

Causes of a bad knob include normal wear from frequent adjustments, heat exposure during cooking, or potential impact damage.

Symptoms of a bad knob include:  

• Inability to grip or turn the knob easily
• Possible inaccurate temperature or function selection  
• A loose, at-risk-of-falling-off knob poses a safety concern
• Reduced aesthetic and functionality of the control area

This Whirlpool OEM replacement knob directly replaces the original for a seamless fit and restores full functionality. It is compatible with KitchenAid, Jenn-Air, Maytag, Amana, and select Kenmore range models as well. Replace yours to maximize usability and keep your range operating safely.
 

Color: White.

Gas range and cooktop surface burner knob. Color: Almond. Measures about 2 inches in diameter. For black order WP3181304. For white order WP3181305.

This black control knob replaces a worn or broken knob for an electric range or cooktop infinite switch. It restores a clean look and lets you set your surface burner heat smoothly and reliably.

• Attaches to the infinite heat switch shaft to select surface burner temperature
• Replaces cracked, stripped, loose, or missing knobs that won't turn the switch properly
• Helps settings align and stay in place during use
• Common symptoms: knob slips on the shaft, falls off, hard to turn, or is missing

• Safety first: turn off power at the breaker and allow all elements to cool before work
• Pull the old knob straight off the control shaft—do not pry against the panel
• Align the new knob with the shaft orientation and press straight on until fully seated
• After installation, rotate through settings to ensure smooth operation and correct "Off" alignment

The Dryer Timer Dial Skirt is an OEM part designed specifically for Whirlpool dryers. It acts as a protective and decorative cover around the timer dial, providing clear labeling for various dryer settings. 

Color: Bisque

Over time, the dial skirt may degrade due to frequent use, exposure to heat, and potential impact, leading to cracks, discoloration, or broken markings. These issues can make selecting the appropriate cycle difficult or confusing.

Signs that the Dryer Timer Dial Skirt may need replacing include:

• Faded or illegible cycle markings
• Cracks or broken sections on the skirt
• The dial skirt no longer fitting snugly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Range Clock Knob is an OEM part for Whirlpool ranges. It attaches to the center of the oven control panel and allows users to adjust the built-in clock, serving as the primary control for setting or correcting the time. 

Over time, the clock knob can become faulty due to regular use leading to internal stripping or wear, exposure to heat causing cracks or warping, or accidental impacts damaging the knob.

Color: Black

Symptoms of a defective range clock knob include:

• Difficulty setting or adjusting the clock
• The knob spins freely without engaging the control shaft
• The knob feels loose, cracked, or broken

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore ranges.

Black surface burner control knob for gas ranges and cooktops. It fits onto the valve stem so you can turn the burner on/off and fine-tune flame level, restoring proper control and appearance when the original is worn or missing.

• Attaches to the surface burner valve shaft to control on/off and flame level
• Replaces knobs that are cracked, stripped, loose, hard to turn, or missing
• Restores clear pointer alignment for accurate settings
• Helps when the knob spins without engaging the valve

• Turn all controls OFF, allow the cooktop to cool, and disconnect power to disable igniters
• Pull the old knob straight off the stem; align the new knob opening with the stem and press straight on until fully seated
• Verify the pointer aligns with the OFF marking before use
• Do not force the knob or use tools—forcing can damage the valve stem

Replacement control knob (dial) for appliance control panels. Restores a secure grip for selecting settings when the original knob is cracked, worn, loose, or missing. What it does:

• Replaces a damaged or worn control knob to restore tactile feedback and accurate selection.
• Makes it easy to turn and set controls that were slipping or stripped.
• Helps prevent accidental changes by providing a firm, centered grip.
• Works with compatible push-on control shafts to align selection markings.

• Disconnect power to the appliance before removing or installing parts.
• Pull the old knob straight off the control shaft; align the new knob to the shaft and push on until it seats.
• Do not force if the knob does not fit—verify shaft style and orientation first.

Black

The Knob(wht) is an OEM part for Whirlpool ranges and ovens. This white knob is designed to blend seamlessly with the appliance's aesthetic while providing a durable solution for controlling the temperature and functions of your range or oven. The knob is an essential interface between the user and the appliance, ensuring precise adjustments can be made to the cooking settings.

Causes for replacement often include prolonged use leading to wear and tear, accidental damage, or exposure to heat and cleaning chemicals that can degrade the material over time.  

Symptoms of a bad Knob include:

• Difficulty in turning or adjusting the knob 
• Cracks or breaks in the knob itself 
• Fading or wear of the indicator marks 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This control knob replaces a worn or broken knob so you can reliably set and adjust your appliance's settings again. It restores a smooth, positive feel and clear pointer alignment for everyday use.

• Selects and adjusts the matching control (such as burner, temperature, or function) on the appliance
• Worn, cracked, or missing knob can make settings hard to change or read
• Loose or slipping knob may prevent the control shaft from turning properly
• Cosmetic damage can detract from the appliance's appearance

• Disconnect power and allow hot surfaces to cool before servicing
• Pull the old knob straight off the control shaft; do not twist against stops
• Align the flat or D-shaped opening with the shaft and press firmly until seated
• If the knob won't seat, inspect the shaft for damage or debris before reinstalling

Color: White

A rotary control knob that restores secure, easy control over appliance settings. Replaces a worn, broken, or missing knob so you can accurately turn the control shaft to select heat, timer, or function positions. What it does:

• Fits onto the appliance control shaft to allow turning and setting of functions or temperatures.
• Use when the original knob is cracked, loose, missing, or slips on the shaft.
• Restores a positive grip for making precise adjustments.
• Matches OEM fit and function to return normal control operation.

• Disconnect power (unplug appliance or switch off circuit breaker) before replacing the knob.
• Remove the old knob by pulling it straight off the control shaft; align the new knob and push it fully onto the shaft until seated.
• If the knob does not seat easily, inspect for debris or damage.
• If the control shaft or retaining hardware is damaged, replace those parts first to ensure a secure fit.