Bath Fan Light Socket Parts

This terminal block provides the electrical connection point where the power cord wires attach to the dryer's internal wiring. It is typically mounted on the rear of the dryer near the power cord entry point. Replace this part if you notice burn marks, melted plastic, loose wire connections, or if the dryer is not receiving power properly.

Replacement interior light bulb for refrigerators. Restores visibility inside compartments when original bulb burns out. Verify fit with your model number.

Covers and protects your range's interior light bulb from spills and debris. Replace when cracked, discolored, or missing to restore proper lighting.

Indicator light signals power and active burners on your cooktop control panel. Replace when dim, cracked, or failed. Verify fit with your model number.

This small indicator light mounts on the range's control panel or front fascia and illuminates to signal when a burner or oven element is active or the oven has reached the set temperature. It typically consists of a lens, socket, and bulb in a compact assembly. Replace this indicator light if it no longer illuminates even after changing the bulb, or if the lens is cracked or discolored.

Refrigerator not cooling properly? A failed condenser fan motor prevents heat removal from the coils. DIY-friendly repair, typically 15-20 minutes to install.

This is a replacement light bulb for the interior cavity of a microwave oven. It illuminates the cooking area so you can monitor food while it heats. Replace this bulb if the interior light no longer turns on when the door is opened or during operation, and you have confirmed the bulb socket and wiring are functioning properly.

Secures the light bulb and provides electrical connection for interior microwave illumination. Replace if bulb won't stay mounted or light won't turn on.

This blower wheel is the replacement fan wheel that moves air through the dryer to support efficient drying and proper venting. Restores airflow from the dryer drum to the exhaust system for more consistent drying performance. What it does:

• Spins on the motor shaft to draw air over the heating element and through the drum.
• Restores proper airflow to reduce long dry times and improve drying consistency.
• Replaces damaged or unbalanced wheels that cause vibration, wobble, or unusual noise.
• Helps prevent overheating by maintaining proper venting when working with a clean vent system.

• Disconnect power to the appliance before beginning any repair.
• Access typically requires removing the dryer front or rear access panel and the drive belt or motor mounting hardware; follow the model service manual.
• Inspect the motor shaft and blower housing for wear, lint buildup, or obstructions and clean the vent system while replacing the wheel.
• Replace or repair worn motor bearing or shaft components to prevent repeat failures.

This terminal block is the appliance wiring connector that secures incoming power and links internal circuits, restoring a safe, reliable electrical connection. Replaces a damaged or burned block to help prevent intermittent power or arcing. What it does

• Provides a secure connection point for incoming power leads and internal wiring
• Restores continuity when a cracked, corroded, or burned terminal causes loss of power
• Helps stop arcing, sparking, or overheating at the power entry point
• Used where multiple wires must be joined and fastened to the appliance chassis

• One terminal block

• Disconnect all power before inspecting or replacing the terminal block
• Verify wire locations and take photos or label wires before removal for correct reassembly
• Tighten connections to manufacturer torque spec—do not over-tighten screws
• If you see extensive burn or damaged wiring, replace damaged wires.

This is a small electric motor that drives the ice maker's ejector mechanism, rotating the sweep arm to push ice cubes out of the mold and into the storage bin. It is mounted inside the ice maker module in the freezer compartment. Replace this motor if your ice maker stops cycling, fails to eject ice, or you hear the motor humming without the ejector arm moving.

Range indicator light lens kit with red and clear lenses. Replace when cracked, discolored, or missing. Fits control panel burner indicators. Verify fit.

Fix ice dispensing issues or grinding noises with a new geared auger motor. This motor drives the auger system for proper ice delivery and circulation.

This blower fan blade replaces a worn or damaged blade to restore proper airflow in compatible Broan ventilation units. It rebalances the blower assembly and helps reduce vibration and noise for more effective ventilation. What it does:

• Spins on the blower motor to move air through the hood or ventilation system
• Replaces cracked, bent, or missing blades that cause reduced airflow
• Stops or reduces wobble and vibration that can make the fan noisy
• Helps restore proper ventilation and kitchen odor/smoke removal

• Disconnect power to the appliance before starting any repair
• Handle blade edges carefully; wear gloves to prevent cuts
• Tighten mounting hardware securely and test operation at low speed first

Fix intermittent power or loose electrical connections in your downdraft ventilation system with this wire terminal socket. Restores secure connections.