Furnace Flame Sensor Parts
Genuine Ge part
By: Ge
Part Number: WB20X10003
Replacement thermostat that senses and controls the appliance heating system to restore accurate heating and stable temperature cycles, helping the appliance reach and maintain the set temperature. What it does:
- Senses temperature and signals the heating element or valve to turn on/off to maintain set temperature.
- Commonly linked to symptoms such as failure to reach set temperature, temperature fluctuating or cycling erratically, or continuous heating.
- Works as the temperature-regulation component in the appliance's control pathway to stabilize performance.
- Matches the OEM function for temperature control; use when thermostat diagnostics indicate a failed or inaccurate sensor.
What's included: One thermostat. Install notes:
- Disconnect power to the appliance before attempting removal or installation to avoid shock or ignition hazards.
- Handle the sensing element and terminals carefully to avoid damage; ensure secure electrical connections and proper routing of any capillary or sensor lead.
- After installation, test the appliance through a full heat cycle to confirm correct operation.
Do-It-Yourself Stories from Customers like You
Shut off while heating Rick S. • Moorefield , WV • January 07, 2019
Replaced Thermostat-Mgt
Read more
More
$14.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Broan part
By: Broan
Part Number: SB02300782
Range hood won't start or shuts off unexpectedly? A failed thermal cutoff fuse interrupts power when temperatures exceed safe limits. Simple repair.
More
$40.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB02X10402
Solid-state triac that switches AC power under command of the appliance's electronic control board. Replacing a failed triac restores proper power control to heating elements or motors and resolves intermittent or no-power symptoms. What it does:
- Acts as a solid-state switch on the control board to regulate AC power to heating elements or motors
- Enables the electronic control to modulate output for temperature or speed control
- Failure can cause no heat, intermittent heating, or loss of motor control
- Designed to match the original control circuit; check board mounting and connections before replacing
What's included: One triac (single unit) Install notes:
- Always disconnect all power at the breaker or unplug the appliance before servicing — risk of electric shock
- This part mounts to the control board; handle the board and connectors carefully to avoid damage
- Use anti-static precautions when handling electronic components;
- Verify the part number on the original board before installation
More
$179.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR50X10090
Freezer working but fridge not cooling? Coils frozen solid? Replace your defrost thermostat. Mounts on evaporator to control defrost heater cycle.
Do-It-Yourself Stories from Customers like You
The freezer was working but the refrigerator wasn't cooling Steve H. • Hamilton , OH • October 10, 2016
The refrigerator is on top and freezer on the bottom. First I cleaned the access cover in the rear of the unit but this didn't fix the problem. I removed the ice maker and panel inside the freezer. The coil was frozen solid. I took off the defrost thermostat and check the continuity and it failed this test. After ordering the new part I installed it and put everything back together. It is now working perfectly.
Read more
More
$63.65
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB20K10030
If your range meat probe gives inaccurate readings or doesn't work, this temperature sensor monitors internal cooking temps. Easy 15-minute DIY fix.
More
$84.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 279080
Dryer not heating or overheating? This thermal limit thermostat regulates temperature and prevents damage. Common DIY fix in about 15 minutes.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Clothes dryer stopped heating Ashby W S. • Sandpoint , ID • February 28, 2016
Looked at how-to video at Appliancepartspros.com. Took back off dryer thinking I needed to replace heating element. Found loose thermostat wire that had corroded. Spade connector on wire fell off. Stripped wire of insulation and steel-wooled the exposed wires. Replaced spade connector. Found out thermostat connection had broken loose. Tried to order a replacement thermostat online but had to get into chat mode with Appliancepartspros.com salesman in order to identify the right thermostat. At...
Read more
More
$59.48
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP71002286
This 20-amp circuit breaker restores overcurrent protection to the appliance's electrical circuit, helping prevent damage from short circuits or overloads. It replaces a worn or tripped breaker so the appliance can receive proper power. What it does:
- Acts as an overcurrent safety device that trips when current exceeds safe limits
- Protects wiring and components from damage caused by overloads or short circuits
- Common symptom: appliance won't power on or stops powering intermittently
- Common symptom: breaker repeatedly trips during normal operation
What's included: One 20-amp circuit breaker Install notes:
- Disconnect power at the house breaker before inspecting or replacing the part
- Handle terminals carefully; ensure connectors are fully seated and tight
- Replace with the exact part number for fit and proper electrical rating
More
$50.57
Out Of Stock
Usually ships within 4 - 14 days
Genuine Lg part
By: Lg
Part Number: 3B74133C
This time delay fuse protects the appliance from overheating by opening the circuit when temperatures exceed safe limits. It's a direct-replacement electrical safety fuse used in heating circuits to help prevent damage and fire risk. What it does:
- Opens the circuit when the detected temperature rises above safe operating limits to stop the heating element
- Helps prevent overheating-related damage to internal components and wiring
- Can cause intermittent or no heating when failed
- Commonly associated with symptoms such as no heat, reduced or inconsistent heating, or a unit that stops running during heating cycles
What's included: One time delay fuse Install notes:
- Disconnect power to the appliance before accessing or replacing the fuse to avoid electrical shock
- Locate the fuse according to your appliance's service manual or diagram and replace with the exact part number
- If the fuse is blown, inspect heating element, thermostat/thermal cutouts, and venting for underlying faults before reinstalling
Do-It-Yourself Stories from Customers like You
Thermostate (correct name is a thermister; 1 time over heat and reacts like a fuse) Paul J. • Parkville , MD • February 16, 2017
Actual problem was due to a poor connection from the circuit board and HV transformer, over time this poor / loose connection began to arc causing enough heat to physically melt the connector and the contact to the thermistor. the problem was obvious but I still followed procedures to check all the components.*** NOTE*** ALWAYS UNPLUG DEVICE FIRST, WITH MICROVAVES, ALWAYS, ALWAYS, DISCHARGE HV CAPICITOR, IT CAN KILL YOU!
just take your time testing components, following your electronic...
Read more
More
$10.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 628532
This is a thermostat that monitors the temperature in the ice maker to signal when ice has fully frozen and is ready to be harvested. It acts as a thermal cutoff device to regulate the ice-making cycle. Replace this thermostat if the ice maker stops producing ice, runs continuously without cycling, or fails to eject ice at the proper time.
More
$59.48
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: R0161087
This defrost thermostat helps control the refrigerator/freezer defrost cycle by sensing evaporator temperature and allowing the heater to run when frost removal is needed. Replaces a failed thermostat to restore normal defrost operation. What it does:
- Closes when the evaporator is cold so the defrost heater can run, then opens when the coil warms to stop defrosting
- Helps prevent excessive frost and ice buildup on the evaporator coil
- Common symptom: visible frost or ice on evaporator, excessive frost buildup, or defrost heater running constantly/ not at all
- Works with the defrost system to maintain efficient cooling performance
What's included:
Install notes:
- Disconnect power to the appliance before starting any repair
- Mount on or near the evaporator coil as originally installed; secure wiring away from moving parts
- Inspect the harness and connector for damage; replace if corroded or brittle
- Test for continuity with a multimeter to confirm thermostat function before and after installation
Do-It-Yourself Stories from Customers like You
Refrigerator & freezer were warm & door water stopped Jay T. • Oklahoma City , OK • September 15, 2014
Condenser was running, evaporator fan was not. My frig has the obsolete adaptive defrost timer card in it.
Tried the "trigger door switch 4 times quickly" to force the frig into defrost mode - would not work.
If the defrost thermostat fails in the proper state (open, I think), the frig can't enter defrost mode and the condensation on the evaporator coils will freeze solid. The melting ice in the dispenser storage will eventually leak out of the door dispenser and make a puddle at the...
Read more
More
$77.76
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10131827
If your range won't reach set temperature or displays incorrect readings, the temperature sensor likely failed. This probe-style RTD sensor restores accuracy.
More
$129.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Lg part
By: Lg
Part Number: 6500JB2001L
This temperature sensor (thermistor) detects internal appliance temperature and sends readings to the control board so the unit maintains proper cooling. Replacing a failing sensor restores accurate temperature monitoring and helps prevent spoilage. What it does:
- Measures internal temperature and provides a resistance-based signal to the control board
- Helps the control system regulate compressor and defrost cycles
- Commonly causes warm or fluctuating temperatures, prolonged cooling, or temperature-related error codes when failing
- Works as a direct-sensing temperature input — not a user control or switch
What's included:
- One temperature sensor/thermistor (single part as shown)
Install notes:
- Unplug the appliance or switch off power at the breaker before servicing
- Handle the sensor and its thin leads carefully to avoid damage during removal and installation
- Route and secure wiring so it does not contact moving parts or sharp edges
Do-It-Yourself Stories from Customers like You
The frig to cold/ ice build up in freezer. John H. • Saylorsburg , PA • August 23, 2022
I replaced both the Temp Sensor and the Defrost Sensor Asy.
Turned out that the Defrost Sensor was bad. That caused the inlet for the DRAIN HOSE to freeze up, That caused water to build up under Evaporator and freeze, That caused water to build up and freeze under the freezer tray.
The discovery happened while changing the Defrost Sensor Asy.
Read more
More
$29.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB20T10023
This probe thermistor monitors interior temperature and sends readings to the control board so your appliance can maintain the correct cooling cycle. It replaces a failed or inaccurate sensor to help restore proper temperature regulation. What it does:
- Senses air or evaporator temperature and reports it to the control module
- Commonly related to warm/freezing issues, incorrect temperature readings, or erratic cycling
- Used by the control system to trigger fans, defrost, and compressor operation as needed
- Works as a direct replacement for the listed OEM temperature probe
What's included: One probe thermistor (single sensor) Install notes:
- Disconnect power before replacing to avoid shock or damage
- Handle the sensor tip and wiring gently to avoid damage to the element or insulation
- Route and secure the wiring so it does not contact moving parts or hot surfaces
More
$85.60
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3188286
This fixed thermostat monitors and limits temperature to protect the appliance's system and components. It's a simple, non-adjustable sensor/limit switch used where a set cutoff temperature is required for safe operation. What it does:
- Opens or cuts power when the monitored temperature reaches its fixed limit to prevent overheating
- Helps stop continuous heating cycles caused by a failed control or sensor
- Commonly used as a safety cutoff in temperature-control circuits
- Can resolve symptoms like persistent overheating, failure to stop heating, or temperature-related shutdowns
What's included:
- One fixed thermostat (single unit)
Install notes:
- Disconnect power before inspecting or replacing the thermostat to avoid shock or damage
- Handle gently; avoid bending terminals or stressing sensing elements
Do-It-Yourself Stories from Customers like You
Needed to replace the t stat s unit Willis G. • Milledgeville , GA • February 12, 2015
Removied the heatcordes and then the four scerws from the top,then rased the top and removied the two wirer.
Read more
More
$49.45
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8533381
This rinse aid sensor detects the presence/level of rinse aid and signals the dishwasher control so the dispenser and cycle logic respond correctly. Replaces a failed sensor to restore proper rinse-aid detection. What it does
- Acts as a reed-style sensor that notifies the control when rinse aid is present
- Helps the dispenser and control board make rinse-aid–related decisions
- Commonly replaced when rinse-aid indicators fail or rinse-aid detection errors occur
- Small, low-voltage sensing device used in the dishwasher dispenser area
What's included
- One rinse aid sensor (reed switch)
Install notes
- Disconnect power to the appliance before starting any service
- Access may require removing the door inner panel or dispenser assembly; follow the service manual
- Handle gently and avoid bending the sensor leads; ensure secure electrical connections
More
$50.57
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00156838
This oven temperature probe is the internal sensor that monitors cooking cavity temperature so the oven control can regulate heat for accurate cooking and bake results. It's a direct-replacement sensing probe for compatible Bosch ovens. What it does:
- Measures internal oven temperature and sends readings to the control board
- Allows the oven to maintain set temperatures for consistent cooking
- Common symptoms of a failing probe: inaccurate oven temps, oven not reaching set temperature, or temperature-related error codes
- Works with the oven's control system to help cycle heating elements or gas valve
What's included: One temperature probe (sensor) — wire and connector as shown in OEM diagram. Install notes:
- Disconnect power to the appliance before servicing to avoid shock hazard
- Handle the probe and its wiring gently; avoid sharp bends or pulling on connectors
- Verify connector orientation and secure connections to the control board per OEM diagram
More
$82.95
Out Of Stock
Usually ships within 4 - 14 days