Furnace Flame Sensor Parts
Genuine Bosch part
By: Bosch
Part Number: 00163297
Dryer not heating or leaving clothes damp? This thermostat with sensing cable regulates temperature and prevents overheating. Easy DIY repair part.
Do-It-Yourself Stories from Customers like You
No heat in dryer and a faulting switch on thermostat Earl R. • Arlington Heights , IL • December 16, 2016
Replaced 2 thermostats
Read more
More
$121.38
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304440785
This sensor detects moisture levels inside the microwave cavity during cooking and communicates with the control board to adjust cook times automatically. It is a key component for auto-cook and sensor-reheat functions. Replace this sensor if the microwave fails to properly detect doneness, overcooks or undercooks food on sensor settings, or displays a sensor error code.
More
$45.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304498734
This noise filter reduces electromagnetic interference generated by the microwave's electronics, preventing it from affecting other nearby appliances or electronic devices. It is typically located near the power input inside the microwave cabinet. Replace this filter if the microwave causes static on radios or TVs, trips breakers intermittently, or if the filter shows visible signs of burning or damage.
More
$43.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10277609
Oven won't heat or stops mid-cycle? A blown thermal fuse cuts power when temperatures exceed safe limits. This part restores heating and protection.
More
$90.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD21X767
This switch sensor is a direct-replacement sensing device that detects the position/state of a moving component and sends that signal to the appliance control for reliable operation. It restores correct sensing when the original fails. What it does:
- Detects and reports a component's open/closed or engaged/disengaged position to the control
- Helps the appliance start and change cycles only when the mechanism is in the correct position
- Can resolve symptoms such as no response from the control, intermittent operation, or cycles that won't advance
- Provides a direct electrical/mechanical interface between the moving part and the control system
What's included:
Install notes:
- Disconnect power to the appliance before starting any repair
- Match this part number to the failed sensor before installing
- Handle wiring and connectors carefully; avoid forcing tabs or pins
- Test operation after installation and restore power only when all connections are secure
More
$47.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH12X10249
Washer not heating or cooling properly? This thermistor temperature sensor assembly measures internal temps and sends readings to the control board.
More
$67.43
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WP23X10015
If your air conditioner won't start or shuts down unexpectedly, a failed compressor overload protector is often the cause. This simple swap restores starts.
More
$65.47
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WP27X10065
This thermistor is the refrigerator temperature sensor that helps the control board monitor and regulate cooling. Replacing a faulty sensor restores accurate temperature readings and consistent cooling performance. What it does:
- Measures internal refrigerator/freezer temperature and sends readings to the control board
- Helps the control board adjust compressor and fan operation for stable temperatures
- Can cause incorrect temperature display or uneven cooling when it fails
- Linked to excessive running, frequent defrost cycles, or poor cooling performance
What's included: One thermistor temperature sensor (1 count) Install notes:
- Disconnect power to the appliance before servicing to avoid shock or damage
- Handle the sensor and wiring harness carefully; avoid kinking or damaging the lead
- Ensure the connector is fully seated and any mounting clip or bracket is secured
- Some panel removal may be required; follow for access and reassembly
More
$58.52
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR57X10069
This flow meter measures the volume of water passing through the refrigerator's water dispensing system. It sends signals to the control board to accurately track water usage and control dispenser operation. Replace this part if your water dispenser delivers inconsistent amounts of water, fails to shut off properly, or if the dispenser display shows inaccurate readings.
More
$195.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00171050
A 15 amp cartridge fuse that protects appliance electrical circuits from overcurrent, helping prevent damage to controls and components. Fits into inline fuse holders or boards where that specific fuse rating is required. What it does
- Interrupts circuit power when current exceeds 15 amps to protect wiring and electronics
- Commonly linked to symptoms like no power to controls, unresponsive display, or appliances that won't start
- Designed to be replaced when visibly blown or when continuity test fails
- Works as the exact rated safety fuse specified for compatible appliances
What's included
- One 15 amp cartridge fuse
Install notes
- Disconnect all power to the appliance before accessing or replacing the fuse
- Replace with the identical fuse type and 15 amp rating only; do not substitute different ratings
- Handle carefully and mount fully seated in its holder or on the PCB as designed
- If the new fuse fails again immediately, stop — repeated failures indicate underlying electrical faults
More
$26.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00413127
This is a replacement electrical fuse used in select Bosch appliances to protect internal circuits by opening the circuit if an overload or fault occurs. It restores proper safety protection when the original fuse is blown. What it does
- Acts as an overcurrent/thermal protection element for control and power circuits
- Prevents further electrical damage by interrupting power when a fault is present
- Common symptom of a blown fuse: appliance has no power or certain functions won't operate
- May be checked when the appliance is completely unresponsive or specific components do not receive power
What's included
- One replacement Fuse 4 (mdl 4)
Install notes
- Disconnect power to the appliance before inspecting or replacing the fuse
- Replace only with the exact part specified for your model; do not bypass the fuse
- If the replacement fuse blows again, stop use—repeated failures indicate a deeper electrical problem
- Wear appropriate safety gear and follow for access instructions
More
$9.61
Out Of Stock
Usually ships within 4 - 14 days
Genuine Danby part
By: Danby
Part Number: 1.01.01.09.011R
$64.34
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 154227809
Dishwasher not heating or shutting off mid-cycle? This thermostat regulates water temperature. Direct replacement part with moderate difficulty install.
More
$40.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 154655901
Do-It-Yourself Stories from Customers like You
Error 01 (leak detector) on electrolux dishwasher Donald Z. • Ivyland , PA • February 02, 2016
First I installed new door gaskets to correct suspected cause of leak which was real - moisture & soap residue found in bottom pan. Could not clear error code from control panel even when I knew there was no water in bottom pan. Suspected fault in leak sensor just above bottom pan. Ordered new leak sensor & installed. Error code disappeared.
Read more
More
$86.22
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 241983101
This is a bimetal thermostat mounted on the ice maker mold that senses temperature to control the ice harvest cycle. It signals the ice maker to begin the harvest and eject ice once the mold reaches the proper temperature. Replace this thermostat if the ice maker stops producing ice, runs continuously without ejecting cubes, or if ice cubes are only partially frozen.
More
$190.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 316217004
If your range oven temperature is inaccurate or uneven, this temperature sensor probe may need replacement. Direct fit part for select ranges.
More
$50.51
Out Of Stock
Usually ships within 4 - 14 days