Long Lite Small Engine Ignition Coil Parts

This thaw heater is the evaporator defrost heating element that melts frost during the refrigerator's defrost cycle. Replacing a failed heater helps restore normal defrosting and reduce frost buildup that can restrict cooling. What it does:

• Heats the evaporator coil during the defrost cycle to melt accumulated ice
• Prevents excessive frost buildup that can block airflow and reduce cooling efficiency
• Common symptoms of a failing heater: heavy frost or ice on the evaporator/back wall, reduced cooling, or long compressor run times
• Works as part of the appliance's defrost system alongside the defrost thermostat and control

• Disconnect power to the appliance before starting any repair
• Access typically requires removing interior panels and the evaporator cover; handle the evaporator and wiring carefully
• Inspect associated defrost components (thermostat, timer/control) if problems persist; replace only parts confirmed faulty

The Surface Element is an OEM part for Bosch cooktop and ranges. Measuring 6 inches across, it provides focused heat from below for smaller sized cookware.

Causes of a bad 6" plug-in element generally relate to normal wear and tear over time. Spills left on the coils could potentially cause issues by corroding internal wiring or damaging heating components.

Symptoms of a bad narrow surface element can include:

• The element heating intermittently or not at all
• Only parts of the coil visibly heating up
• Buzzing or clicking coming from below the element
• Tripped circuit breakers affecting that specific element

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This conversion kit includes the orifices and components needed to convert a natural gas dryer to operate on liquid propane (LP) gas. It ensures the correct fuel-to-air mixture for safe and efficient burner operation on LP. Use this kit when installing a natural gas dryer in a home that only has an LP gas supply.

Fix evaporator coils freezing up every few months with this refrigerator defrost heater assembly. Restores proper defrost cycles in bottom-mount models.

Burner won't heat or stuck on high? This surface element restores proper heating control to your electric range stovetop. Common DIY repair.

Oven not heating or baking unevenly? This bake element assembly restores consistent lower heat for proper cooking. Moderate DIY repair for most models.

Fix buzzing noises or no flame in your gas dryer with a new valve assembly. Solves igniter glow without ignition. Moderate DIY repair with basic tools.

Fix a dryer that won't heat or has a weak flame with this gas burner orifice. Controls proper fuel flow for consistent heating. Direct replacement part.

Burner not heating or heating unevenly? This 6-inch surface coil element restores consistent heat to your electric range. Simple plug-in replacement.

Broiler not heating or browning food properly? This upper oven broil element restores high-heat broiling for searing and finishing. Easy DIY fix.

This bake element heats the oven's lower chamber so food and bake cycles reach cooking temperatures. Replace a damaged or non-heating element to restore even baking and proper oven operation. What it does

• Converts electrical power into heat for the oven's bake cycle.
• Heats the oven's lower cavity to maintain set cooking temperatures.
• Commonly replaced for symptoms like no heat, weak heat, or uneven baking.
• Works with the oven's controls and sensors to deliver consistent bake performance.

• Disconnect power to the range at the breaker before starting any work.
• Allow the oven to cool completely and wear gloves to protect against sharp edges.
• Remove the oven racks and detach mounting screws and wire connectors to replace the element.
• Only reconnect power after the element is secured and wiring is reattached; test on a short bake cycle.

Range burner not heating? This top surface element restores cooking power to your electric range. Direct plug-in design makes installation quick and easy.

This is the upper broil element located at the top of the oven cavity, responsible for producing high, direct heat for broiling food. It is a looped metal heating element that glows red when energized. Replace this element if it no longer heats up, heats unevenly, has visible cracks or blistering, or if the broil function stops working entirely.

This gas valve assembly controls the flow of gas to the burner in a gas dryer. It consists of solenoid-operated valves that open and close to regulate gas supply during the heating cycle. Replace this assembly if the dryer runs but does not heat, heats intermittently, or if you notice the dryer stopping mid-cycle without fully drying clothes.

Freezer frosting up or fridge not cooling? This defrost heater kit melts ice buildup on the evaporator coil. DIYers report moderate difficulty repair.

This surface heating element replaces a damaged or worn top burner coil to restore cooking heat on electric ranges. It installs into the stove's cooktop receptacle and provides a reliable heating surface for pots and pans. What it does:

• Heats cookware on the cooktop for boiling, frying and simmering
• Restores power to a burner that no longer heats or only heats intermittently
• Replaces elements with visible breaks, burn spots, or inconsistent temperature
• Works with the range's burner receptacle to complete the heating circuit

• Disconnect power to the range at the breaker or unplug before servicing.
• Replace by lifting the cooktop or removing the element from its receptacle per your model's service instructions.
• Ensure terminals are fully seated and secured; inspect wiring and receptacle for damage and replace if necessary.