Replace Door Hinge Parts

A hinge pin assembly that secures and aligns an appliance door to its cabinet, restoring proper fit and smooth opening and closing while reducing hinge noise. What it does:

• Secures the door pivot and maintains proper door alignment for a consistent seal.
• Can correct door sag, uneven gaps, or doors that stick, scrape, or fail to close fully.
• Can reduce grinding, clicking, or binding noises caused by worn or bent hinge pins.
• Replaces worn, broken, or bent hinge components that affect door motion.

• Disconnect power to the appliance before beginning any repair.
• Support the door (use a helper or suitable block) to prevent it from dropping when removing the hinge.
• Basic hand tools are typically required; follow the manufacturer's service instructions for safe removal and reinstallation.
• Inspect adjacent hinge mounts and fasteners during installation; replace damaged mounting hardware as needed.

Replacement hinge that supports and pivots your oven door. Install when hinge is broken, worn, or causing door to sag, slam, or leave gaps around the seal.

Replaces cracked, warped, or broken inner door panel on front-load washers. Restores door structure and provides mounting surfaces for bins and seals.

Black center hinge bracket mounts between refrigerator doors to support and align them. Replace if bent, cracked, or worn to restore proper door swing.

OEM mounting bracket that secures the hinge and pin assembly inside your refrigerator. Replace if cracked, broken, or missing to restore proper alignment.

Replace a broken or worn oven door hinge to restore proper door alignment and closure. Connects door to frame and controls movement. Essential when door sags.

This complete outer door assembly replaces a damaged or worn refrigerator/freezer door to restore proper sealing, appearance, and operation. It provides a ready-to-install replacement that aligns with the original cabinet opening and latch points. What it does:

• Replaces a cracked, dented, or warped outer door that prevents proper closing or looks damaged
• Restores proper door alignment and helps the gasket seal evenly (reducing cold-air loss)
• Re-establishes mounting points for hinges, handles, and trim for reliable operation
• Improves appliance appearance by replacing scratched or discolored door surfaces

• Installation typically requires removing hinge fasteners and lifting the old door straight off the hinge pins — support the door to prevent drops or damage
• Reuse any compatible handle/trim when shown; replace hardware if stripped or damaged
• Disconnect power and empty door-mounted items before starting to avoid injury or spills

Upper door hinge assembly for bottom-mount refrigerators. Mounts at the top of the cabinet to support the door. Replace if cracked, broken, or lost.

This is the outer door panel or glass assembly on the front of the dryer. It forms the exterior surface of the dryer door and works with the inner door panel to create a sealed enclosure. Replace this part if the outer panel is cracked, shattered, or damaged, which can affect the door's ability to close securely and maintain proper drying temperatures.

This cam door replaces the small plastic cam that guides and supports the appliance door mechanism, restoring proper door alignment and secure closing so the appliance can latch and operate reliably. What it does:

• Guides the door or door strike into the correct position during closing
• Helps the latch engage so the appliance recognizes the door as closed
• Replaces worn, cracked, or broken cams that cause misalignment or noisy operation
• Can stop symptoms such as a door that won't seat, rattles when closing, or prevents the appliance from starting

• One cam door (single replacement cam)

• Disconnect power (and water if applicable) before starting any repair
• Remove the door or access panel per your model's service instructions to reach the cam
• Verify cam orientation and engagement with the latch/strike before final assembly

Right-hand door hinge assembly for dryers. Installs on the door panel to restore proper alignment and smooth opening. Replaces cracked, worn, or broken hinges.

Black outer glass panel for range oven doors. Restores appearance and insulation when original glass is cracked, shattered, or stained. Installs on exterior.

Replaces the interior face of your dishwasher door. Ideal when the door liner is cracked, dented, melted, or visibly worn. Restores a clean surface.

This is a small hinge washer (shim) that sits between the door hinge and the refrigerator cabinet to ensure proper door alignment and smooth operation. It helps maintain the correct spacing and reduces friction at the hinge point. Replace this part if the refrigerator door is sagging, not closing properly, or if the original washer is worn, cracked, or missing.

This is the outer glass panel that forms the exterior surface of the oven door. It provides a finished appearance and works with the inner glass to insulate heat inside the oven cavity. Replace this panel if the glass is cracked, shattered, or if heat is escaping from the front of the oven during use.

This door hinge supports and pivots the appliance door for smooth, aligned opening and closing. Replacing a worn hinge restores proper closing and helps the latch and door seal make consistent contact. What it does:

• Provides the pivot point and structural support for the door
• Maintains door alignment for correct latch engagement and seal contact
• Helps prevent binding, sagging, uneven movement, and squeaks
• Common fix for doors that won't close fully or feel loose/wobbly
• Replaces hinges that are bent, cracked, or show excessive play

• 1 door hinge

• Disconnect power (and shut off gas/water if applicable) before servicing
• Support the door to prevent strain; removal may be required to access the hinge
• Remove hinge cover/trim and mounting screws; transfer any hardware to the new hinge
• After installation, verify alignment and closure; adjust as needed for proper latch and seal contact