Hardware Hand Small Engine Ignition Coil Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 240356217
Fixes ice buildup in freezer and warm fridge. This defrost heater melts frost on evaporator coils during defrost cycles. DIY repair, about 30 minutes.
Do-It-Yourself Stories from Customers like You
Defrost cycle was not working thus ice build up on evaporator coils was blocking vent to refrigerator compartment which was not getting cool freezer section seemed to be fine Jean F. • Monroe Township , NJ • September 05, 2016
Replaced defrost timer, defrost thermostat, and defrost heater. I didn't have a continuity meter to check old parts so replaced all three. Also cleaned condenser coils. Used your videos to help with repair.
Read more
More
$87.95
- Compare At:
-
$105.54
- You Save:
-
$17.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 318246703
This installation tool assists with mounting and securing your microwave during setup. Replace if lost, damaged, or missing from your original kit.
More
$11.29
- Compare At:
-
$11.84
- You Save:
-
$0.55
Genuine Frigidaire part
By: Frigidaire
Part Number: 903118-9010
Size: 8 inch. 2200 watt. Radiant.
Do-It-Yourself Stories from Customers like You
Burner on glass top stove went out Rhonda F. • Huntingotn , WV • December 02, 2014
After watching the videos and reading the instructions on your website and the instructions which came with the new part, installation was easy. There was some simple rewiring involved with the included parts, but was simple. The replacement part actually arrived the day after it was ordered and I only paid for the standard shipping. Very fast.
Read more
More
$176.44
- Compare At:
-
$208.20
- You Save:
-
$31.76
Genuine Whirlpool part
By: Whirlpool
Part Number: W10138802
Replacement screw for microwaves. Secures door hinges, panels, brackets, and internal components. Use when original fastener is missing, stripped, or lost.
Do-It-Yourself Stories from Customers like You
Needed new microwave door Patricia C. • Lincoln , NE • September 16, 2014
Attached new door after missing screw was sent to me
Read more
More
$10.66
- Compare At:
-
$11.73
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: W10565483
Factory mounting screw secures panels, brackets, and internal components in your microwave. Replace if broken, stripped, or missing during repairs.
Do-It-Yourself Stories from Customers like You
The keypad would make entries on its own at anytime and once the microwave started itself it continued to get worst over weeks a beep almost every hour it was like a ghost Christopher J. • Hoffman Estates , IL • February 26, 2016
I replaced the keypad entry and it fixed the problem for 24 hours, but then it beeped and entered 0. But is much better than it was.
I am an electronics tech and I know through the yrs 2000-2010 there were a rash of bad capacitors produced. I now believe a second board which has these capacitors is the source of the problem. I also believe the second board let voltage spikes through which slowly damaged the keypad board. My goal is to order the capacitors which cost less than a $1 each...
Read more
More
$12.13
- Compare At:
-
$13.34
- You Save:
-
$1.21
Genuine Whirlpool part
By: Whirlpool
Part Number: W11206744
Replacement mounting screw for securing panels, trim, and internal components in your range or cooktop. Replace missing, stripped, or damaged screws.
More
$12.13
- Compare At:
-
$13.34
- You Save:
-
$1.21
Genuine Ge part
By: Ge
Part Number: WB01T10049
This machine screw is an authentic OEM replacement part sourced directly from the manufacturer. It is used in securing the burner head to the gas range top so that it can be used for cooking. If the burner head becomes loose or the screw is missing, it should be replaced. For safety reasons, the burner should not be used until this screw is replaced; the burner head could shift during cooking and lead to a fire. To start, disconnect the gas and power from the stove to prevent accidental ignition of the burner. Make sure the burners are not hot. Remove the burner grate and burner cap from the burner that is missing a screw. Install the new screw in the hole and tighten it with a screwdriver. Put the burner cap and burner grate back on the stove and reconnect the gas and power. Periodic inspection of the burner heads and all associated screws and parts on the stovetop will prevent accidents and keep the stove working correctly. This screw is a silver, metal part that is sold individually. It is designed for use in gas rangetops manufactured by General Electric and Hotpoint.
Do-It-Yourself Stories from Customers like You
Igniter replacement and overall maintenenance Julio M. • Tucson , AZ • February 13, 2017
Second repair after 10 years of service - igniter had cracked and spill overs were causing the others to misfire. This was a two-step process. I took apart the cooktop to see what parts were neded. Screws were all rusted, I had to drill ome out. The burner gaskets broke during the process and needed replacement. One of the burners had deformed due to excess heat. After that initial diagnose, I reassembled the cooktop without the igniters and ordered all the parts I needed. The second stage was...
Read more
More
$13.16
- Compare At:
-
$13.60
- You Save:
-
$0.44
Genuine Ge part
By: Ge
Part Number: WB1X1137
Replacement screw for securing panels, brackets, and internal components in ranges, ovens, and cooktops. Replace missing, stripped, or damaged screws.
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Ge part
By: Ge
Part Number: WB30T10124
Warming element not heating? This radiant element restores heat to your warming zone. DIY-friendly repair with basic tools in under an hour.
Do-It-Yourself Stories from Customers like You
Only 2 elements out of 5 would turn on they were only half on Saul T. • Rosharon , TX • July 16, 2016
I looked online to see what the issue could be on YouTube. I found out that replacing the elements was one possibility to fix it. I opened the stove took pictures and took out the radiant element to find out on the inside they had been burned. This solidified the issue. I ordered them right away and it worked! No need to call a repairman!
Read more
More
$65.88
- Compare At:
-
$79.84
- You Save:
-
$13.96
Genuine Ge part
By: Ge
Part Number: WE4X750
Dryer not heating? This gas igniter lights the burner to produce heat. Replaces worn or non-glowing igniters. Basic repair, about 10 minutes for most DIYers.
Do-It-Yourself Stories from Customers like You
No heat Lisa R. • Novato , CA • January 01, 2016
Gas valve coils were bad
Read more
More
$45.30
- Compare At:
-
$57.19
- You Save:
-
$11.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8318277
Dryer won't heat or gas won't ignite? This gas valve controls gas flow to the burner assembly. Moderate DIY repair requiring drum removal.
Do-It-Yourself Stories from Customers like You
Gas valve was leaking at the outlet Stuart P. • Fox River Grove , IL • June 01, 2019
Remove the top cover, front door panel, drum, and back cover to access the valve assembly hold down bolts. Unhook the gas line, remove the electrical connections to the coils, then R&R the valve assembly. Don’t forget to hook the connectors back to the coils before putting everything back together...
Read more
More
$218.95
- Compare At:
-
$258.36
- You Save:
-
$39.41
Genuine Bosch part
By: Bosch
Part Number: 00484791
This is an 8-inch coil-style surface heating element that plugs into a burner receptacle on the cooktop of your range. It provides radiant heat for cooking on the stovetop. Replace this element if the burner doesn't heat up, heats unevenly, produces visible damage such as pitting or blistering, or fails to glow red when turned on.
Do-It-Yourself Stories from Customers like You
I had 2 burners out David R. • Elkhart , IN • December 02, 2017
When I removed them to check for continuity I found that one ear on each element had broken off. I dug the broken spades out of the receptacel and put in the new elements. Works great now.
Read more
More
$117.60
- Compare At:
-
$141.12
- You Save:
-
$23.52
Genuine Frigidaire part
By: Frigidaire
Part Number: 318246702
Installation tool for mounting built-in microwave ovens. Required for proper alignment during install. Replace if missing, damaged, or worn from use.
Do-It-Yourself Stories from Customers like You
No heat bottom coil shorted out and replaced still no heat Kirk K. • Brockton , MA • April 18, 2015
As described, thanks your helped repair what the repairman would not or could not do..
Bottom element shorted and burned up from previous homeowner, not sure why or how?
Replaced both heating elements, still no heat, the clock controller was also damaged due to the shorting even though it appeared to work OK, just no heat.
Replaced clock/controller , both elements and the temp sensor .ALL WORKING !!!
Lots of scrubbing and now have a "new" oven.!
Half the cost of the serviceman,
Saved my oven...
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Lg part
By: Lg
Part Number: 4000W4A003A
Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.
Do-It-Yourself Stories from Customers like You
AC fan motor. Tom C. • Liberty Lake , WA • September 26, 2021
Disassembled and replaced ac motor.
The hardest part was to pull the microwave out of the cabinet.
Read more
More
$10.58
- Compare At:
-
$11.64
- You Save:
-
$1.06
Genuine Lg part
By: Lg
Part Number: MEE64286201
$255.56
- Compare At:
-
$304.12
- You Save:
-
$48.56
Genuine Whirlpool part
By: Whirlpool
Part Number: W11676351
This is a replacement screw used to secure panels, trim, or small components on compatible Whirlpool appliances. Installing the correct fastener restores proper fit and helps stop rattles or loose trim. What it does:
- Secures trim, panels, or control components to prevent movement and rattling
- Replaces missing or damaged hardware that can cause gaps or loose parts
- Helps maintain proper alignment of panels and movement-free operation
- Used wherever a factory screw of this size and head style is specified
What's included: One screw Install notes:
- Always disconnect power (and water, if applicable) before servicing the appliance
- Use the correct screwdriver or driver bit to avoid stripping the head
- Install by hand until threads engage, then tighten snugly—do not overtighten
- Keep removed hardware organized before final reassembly
Do-It-Yourself Stories from Customers like You
Igniter was lighting but gas wouldn't ignite Timothy G. • Lumberton , NJ • December 21, 2014
Igniter was lighting but gas wouldn't ignite. I would see the igniter light up and smell some gas, but the flame would not light. After looking at some websites, it seemed that the igniter was weak and wouldn't cause ignition, even though it was glowing. Since the part numbers were the same, I switched the broiler and the oven igniters. The oven began working and the broiler wouldn't light. So, I ordered the new part (igniter) and replaced the broken one.
I had to pull the oven away from...
Read more
More
$13.95
- Compare At:
-
$15.42
- You Save:
-
$1.47