Yard Machine Small Engine Float Bowl Gasket Parts
Genuine Bosch part
By: Bosch
Part Number: 00486767
The oven door gasket is the heat-resistant seal around the 30-inch oven cavity. It helps the oven reach and hold temperature, preventing heat and steam leaks, and replaces a worn or damaged seal for consistent baking results.
- Seals the door-to-cavity gap to limit heat and moisture loss
- Restores proper door compression to help maintain accurate temperatures and normal preheat times
- Replaces gaskets that are torn, frayed, flattened, brittle, or stretched
- Common symptoms: hot air or steam escaping at door edges, temperature fluctuations, longer cook times, or a door that no longer closes snugly
What's included: 1 oven door gasket Installation notes:
- Disconnect power and allow the oven to cool completely before servicing
- Open the door and remove the old gasket, noting seam orientation and where the ends seat
- Clean the mating surfaces; install the new gasket with the seam at the bottom center, seating the ends fully into the factory holes/retainers without overstretching
- Close the door and check for uniform contact around the perimeter
Do-It-Yourself Stories from Customers like You
Oven door gasket damaged Richard R. • Enfield , CT • September 16, 2014
Simple rip and replace.
Read more
More
$94.49
- Compare At:
-
$111.50
- You Save:
-
$17.01
Genuine Whirlpool part
By: Whirlpool
Part Number: W10491987
This foam seal fits between mating parts to create a tight barrier that helps prevent leaks and rattling. Replacing a worn or missing seal restores proper sealing and helps keep your appliance running quietly. What it does:
- Creates a compliant gasket between components to limit air or moisture passage
- Helps dampen vibration and reduce rattling/buzzing where parts meet
- Helps maintain proper airflow or fluid routing as designed
- Typical symptoms include leaks, condensation/frost near a joint, or new vibration noises
What's included:
Install notes:
- Disconnect power; turn off the water supply before service
- Note the original seal's routing/orientation before removal
- Clean and dry all mating surfaces; remove old foam and residue
- Install without stretching or over-compressing; ensure even contact with no gaps
Do-It-Yourself Stories from Customers like You
Upper cooling blower was making loud noise no error code Raymond M. • Mundelein , IL • February 06, 2016
I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary.
IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W11159728
This refrigerator door gasket creates a tight seal between the door and cabinet to keep cold air in and moisture out. Replacing a worn or torn gasket restores consistent cooling performance and helps prevent frost and condensation from air leaks.
- Forms an airtight seal around the door perimeter to contain cold air
- Helps maintain proper temperatures and humidity inside the refrigerator
- Reduces frost, condensation, and warm spots caused by leaking seals
- Typical signs of failure: tears, gaps, hardened/warped corners, or doors not sealing firmly
What's included: 1 door gasket Install notes:
- Unplug the appliance before servicing
- Let the new gasket warm to room temperature; use warm water or a hair dryer on low to relax bends
- Press the gasket fully into the door channel and seat the corners evenly
- Close the door and check for uniform contact all around; allow time for the gasket to conform
More
$21.95
- Compare At:
-
$26.34
- You Save:
-
$4.39
Genuine Whirlpool part
By: Whirlpool
Part Number: W11535094
The Water Inlet Valve is an OEM component for Whirlpool dishwashers. As the critical connector between the home supply lines and the dishwasher itself, this valve oversees the entry of water into the machine for wash and rinse cycles.
Causes of inlet valve malfunction include mineral deposits accumulating inside the valve body or worn seals no longer maintaining a tight closure following years of usage. This places increased strain on internal mechanisms.
Symptoms consist of:
- Slow or irregular water fills failing to reach proper levels
- Fluctuating water pressure inputs
- Drips or continuous leaks at the water connection
- Inability of cycles to advance beyond initial fill stages
This Whirlpool OEM replacement is compatible with KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers as well.
More
$53.32
- Compare At:
-
$63.98
- You Save:
-
$10.66