Shock Ear Parts

Drum shock absorber for front-load washers. This damper connects the tub to the chassis and controls movement during wash and spin, reducing vibration and noise so the washer can ramp to proper spin speed without banging.

• Damps and stabilizes the drum to control vibration during acceleration, spin, and coast-down
• Helps reduce shaking, banging, and "walking" across the floor
• Can help address out-of-balance messages and noisy operation
• Worn shocks may leave loads wet after spin or cause loud thumping

• Disconnect power and shut off water before servicing; move the appliance to access panels safely
• Access the shock from the front or rear per model; support the tub to relieve tension
• Note pin/bolt orientation; transfer any reusable hardware and fully seat both ends of the new shock
• Consider replacing them as a set for balanced damping; run a short test cycle to verify stability

This washing machine shock absorber stabilizes the outer tub during wash and spin. Replacing a weakened damper helps control vibration and noise so the washer runs smoother and is less likely to shake, bang, or walk.

• Mounts between the tub assembly and cabinet/base to cushion movement
• Helps prevent excessive vibration, shaking, and thumping noises
• Can reduce "walking" or out-of-balance interruptions when a damper is worn
• Supports smoother, quieter spin performance

• Disconnect power and turn off water supply before servicing
• Remove the appropriate access panel(s) to reach the dampers
• Support the tub when removing mounting pins/bolts; match the original orientation
• Inspect all dampers; replace any that show wear for balanced performance

This hinge spring restores proper tension to the door so it opens and closes smoothly and stays aligned. Replacing a fatigued spring helps prevent sagging or slamming and supports a consistent, reliable door close.

• Provides the return tension/counterbalance for the door hinge mechanism
• Assists smooth opening/closing and helps the door stay properly aligned when latched
• Helps maintain consistent closing force over time
• Failure symptoms include: door drops quickly, won't stay aligned or fully closed, weak/squeaking spring action

• Disconnect power before service; allow any hot surfaces to cool
• The hinge and spring are under tension—support the door and release/install tension carefully
• Note spring orientation and hole positions before removal; match them on installation
• Access may require removing trim or the door; keep fasteners organized for reassembly

This spring closure is the OEM-style replacement that helps a door or panel return to a closed position smoothly and reduces slack or slamming for improved alignment and operation. It fits the original mounting points and restores the intended closing action. What it does:

• Provides the tension needed to pull a door/panel closed and hold it in place
• Restores consistent closing action when the original spring is worn or broken
• Helps reduce noisy slamming and prevents partial-open gaps that affect seal and alignment
• Works with the door/panel linkage to improve day-to-day usability

• One spring closure

• Turn off power to the appliance or unplug it before starting any repair
• Verify correct orientation and routing before fastening; spring tension can cause sudden movement
• Use appropriate hand tools and eye protection; if the original mounting clips are damaged, replace them as well

This spring wheel is a replacement plastic pulley used in appliance hinge and tension assemblies to restore smooth movement and proper tension. It helps reduce noise and prevents binding from a worn or broken wheel. What it does:

• Guides and retains the hinge/tension spring for smooth opening and closing motion
• Restores proper tension and alignment when an original wheel is cracked or worn
• Helps eliminate scraping, grinding, or binding noises caused by a damaged wheel
• Keeps moving hinge components from slipping or catching during operation

• One spring wheel (LE022C4 / WR02X11233)

• Disconnect power to the appliance before beginning any repair
• Basic hand tools are typically required; follow the OEM service instructions
• Inspect surrounding hinge/spring components and replace any damaged parts

This replacement tension spring restores proper return and tension for a Speed Queen laundry component, helping moving parts operate smoothly and quietly. Fits select models — used where a small coil spring provides return force. What it does

• Provides return/tension force for a moving component (door, lever, or linkage) to hold proper position.
• Helps reduce rattling, sticking, or loose movement caused by a worn or broken spring.
• Restores reliable mechanical action when the original spring has stretched, broken, or come off.
• Small, coil design suitable for use where compact tension is required.

• One replacement spring.

• Disconnect power to the appliance before servicing; follow safe lockout procedures.
• Handle under tension carefully; use pliers or spring tool as recommended in the service manual.
• Inspect adjacent clips, pins, and mounts; replace any damaged hardware for secure reinstallation.
• Refer to the appliance's service manual or OEM instructions for exact placement and installation steps.

This genuine replacement spring provides the tension for the refrigerator water/filter release rod so the filter stays secured and releases correctly. Restores proper filter engagement for smooth insert and removal. What it does:

• Applies tension to the filter release rod so the filter locks and ejects reliably
• Helps prevent the filter from slipping or failing to latch
• Reduces binding or sticking when inserting or removing the filter
• Works with the filter housing release mechanism to maintain normal operation

• One filter release rod spring

• Disconnect power to the appliance before servicing; shut off water if accessing the water/filter area
• Remove the filter housing cover per your model's service instructions to access the spring
• Springs can be under tension—wear eye protection and handle carefully

The Refrigerator Gas Spring and Grille Assembly is designed to ensure the smooth and secure operation of your Samsung refrigerator. This genuine OEM part combines a high-quality gas spring with a durable grille, providing reliable support while maintaining the sleek appearance of your appliance. Compatible with a wide range of Samsung refrigerator models, it guarantees a perfect fit and straightforward installation. By replacing worn or damaged components with this genuine OEM part, you can restore your refrigerator's functionality and extend its lifespan. Enjoy effortless door movement and enhanced stability, ensuring your fridge operates efficiently and looks as good as new. This assembly not only improves the overall performance of your refrigerator but also contributes to a better user experience by making door handling easier and more reliable.

Refrigerator Ice Route Spring Cover is an essential component designed to maintain the efficiency of your refrigerator's ice making system. This high-quality spring cover ensures smooth operation of the ice route, preventing leaks and ensuring consistent ice production. Crafted as a genuine OEM part, it guarantees compatibility with a wide range of Samsung refrigerator models, providing a perfect fit and reliable performance. The durable construction of the Refrigerator Ice Route Spring Cover ensures long-lasting use, reducing the need for frequent replacements. Easy to install, this part allows you to quickly restore your refrigeratorGÇÖs ice functionality without professional assistance. By replacing a cracked, missing, or damaged spring cover with this genuine OEM part, you can enhance the overall performance of your Samsung refrigerator, ensuring your ice maker operates efficiently and effectively.

This genuine OEM spring provides the tension needed for the appliance door to open and close smoothly and stay properly seated. It restores reliable door operation and reduces sagging or unlatched door issues. What it does:

• Applies tension to the door hinge/assembly so the door stays closed and aligns properly.
• Helps the door open and close smoothly without slamming or dragging.
• Reduces wandering, sagging, or a door that won't latch securely.
• Can eliminate popping or squeaking noises tied to a worn or stretched spring.

• One replacement door-tension spring.

• Disconnect power (and water if applicable) before starting any repair.
• Springs are under tension — use caution and appropriate tools/gloves to avoid injury.
• Inspect hinge/retainer hardware and replace any damaged clips or anchors during installation.

This cabinet damper helps control the motion of a refrigerator cabinet or door assembly for smoother, more balanced movement and reduced slamming. It restores the intended counterbalance action when the original damper is worn or broken. What it does:

• Provides counterweight action to help a cabinet or door close smoothly and stay balanced
• Reduces sudden drops, slamming, and uneven door movement caused by a failed damper
• Works as the mechanical balance component within the cabinet/door hinge/damper system
• Commonly replaced when the door feels loose, drops unexpectedly, or does not stay in position

• One cabinet damper as pictured

• For safety, unplug the appliance or disconnect power before beginning work
• Basic disassembly of the cabinet/door trim or hinge may be required; follow OEM instructions
• Verify orientation and mounting location before removing the old part to ensure correct installation

This replacement axle/latch spring secures the latch/axle assembly so the appliance door or panel stays engaged during use. It restores proper latch tension for reliable closing and operation. What it does:

• Applies tension to the latch/axle so the door or access panel stays closed and latched
• Helps ensure the appliance detects a closed door and will start or run normally
• Common symptom: door won't stay closed or latch feels loose or fails to engage
• Small metal spring designed for a specific latch assembly — not a universal part

• Disconnect power to the appliance before starting any repair
• Access may require removing a panel, bezel, or door — use proper tools and keep fasteners organized
• Handle the spring and latch components carefully; springs are under tension and can snap free