Bulb Parts

The Range Hood Halogen Lamp is an OEM part for Bosch range hoods. It provides illumination for the cooking area beneath the range hood, enhancing visibility while cooking. This halogen lamp is designed to fit seamlessly into the range hood, ensuring a bright and focused light.

You should replace this halogen lamp if it burns out or becomes faulty. Causes of a bad halogen lamp can include filament burnout from prolonged use, electrical surges, or damage from handling during cleaning or maintenance.

Symptoms of a bad halogen lamp include:

• Dim or flickering light
• No light when the range hood is turned on
• Discoloration or dark spots on the lamp
• Frequent bulb replacements needed

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Replace your cooktop's indicator light when it breaks, cracks, or stops illuminating. Signals when burners are active. Verify fit with your model number.

Red indicator lens for gas cooktop burner controls. Replace when cracked, discolored, or missing to restore burner status visibility. Verify long vs short lens for your model.

This washer clutch assembly engages the drive system to shift between wash and spin modes. Replacing a worn clutch restores smooth agitation and full-speed spin performance, reducing noise and leaving clothes properly wrung out at cycle end.

• Engages and disengages the drive to transition between wash/agitate and spin
• Transfers motor torque to the basket during wash and spin
• Worn clutch can cause weak or no spin
• May result in no agitation or intermittent shifting
• Can cause grinding/scraping noises and leave clothes wet after the final spin

• Unplug the appliance and shut off water before starting
• Access from the bottom; support the washer securely to prevent tipping
• Remove obstructing drive components to reach the clutch; note hardware/wire routing for reassembly
• After installation, rotate the basket by hand and run a quick test cycle to confirm proper operation

LED light bulb for refrigerator and freezer compartments. Replace when lighting fails or dims. Verify fit by checking your model number compatibility.

Indicator light lens covers and diffuses the panel light on your range or oven. Replace when cracked, discolored, or missing to restore visibility.

Indicator light lens covers the pilot lamp opening on your range control panel. Replace when cracked, discolored, or missing to restore visibility.

Restores clear interior illumination when the door opens. Replace when bulb burns out or flickers. Confirm fit with your model number before ordering.

To order indicator light use WP903115.

Protective lens cover for cooktop indicator lights. Replace when cracked, discolored, or missing to restore visible on/hot status alerts. Confirm fit with your model.

Restore bright, clear visibility inside your oven with this 20-watt halogen light bulb. Replace a burned-out bulb to monitor cooking through the window and safely see racks and dishes without opening the door. What it does:

• Illuminates the oven cavity when the light switch is used or the door is opened
• Helps you check cooking progress and locate items inside the oven
• Common symptoms: interior light won't turn on, is dim or flickers, or the bulb glass is broken
• 20-watt halogen design matches the original lighting specification

• 1 halogen light bulb

• Disconnect power at the breaker and allow the oven to cool completely
• Wear gloves or use a clean cloth; avoid touching the glass envelope
• Remove the lens/cover per your model instructions; carefully remove the old bulb and fully seat the new bulb
• Reinstall the cover, restore power, and test; use only the wattage/type specified for your appliance

Holds the light bulb and maintains electrical connection in your microwave. Replace when socket is cracked, heat-damaged, or causes flickering lights.

Interior light bulb for upright freezers. Replace when burned out or flickering to restore visibility. Verify compatibility with your model number.

The Bulb Light is an OEM part for GE refrigerators. It is designed to illuminate the interior of the refrigerator and freezer compartments, making it easier to see and access food items. This light bulb fits securely into the designated socket and provides bright, reliable lighting to enhance visibility.

You should replace the bulb light if it burns out or becomes damaged. Causes of a bad bulb light can include regular wear and tear, electrical issues, or physical damage from impacts or vibrations. A faulty bulb can leave the refrigerator compartments dim or completely dark, making it difficult to find items.

Symptoms of a bad bulb light include:

• The light not turning on when the refrigerator door is opened
• Flickering or intermittent lighting
• A visibly burned-out or broken bulb

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Illuminates your oven interior for visibility while cooking and cleaning. Replace when burned out to restore lighting. Verify fit with your model number.

LED light assembly illuminates refrigerator interior. Replace when light flickers, dims, or fails. Verify fit with your model number before ordering.