Power Strike Small Engine Spark Plug Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10900067
Dryer won't heat or shuts off during cycle? The thermal cut-off terminal prevents overheating by cutting power. DIY fix in 15-20 minutes with a multimeter.
Do-It-Yourself Stories from Customers like You
No heat output. The drum would turn. Lewis B. • Houston , TX • June 29, 2022
Replaced Thermal Cutoff sensor.
Read more
More
$54.25
- Compare At:
-
$65.10
- You Save:
-
$10.85
Genuine Bosch part
By: Bosch
Part Number: 00166630
Detergent dispenser door won't stay closed? This latch secures the detergent cup during wash cycles. Simple DIY repair with video guidance included.
Do-It-Yourself Stories from Customers like You
Soap dispenser did not stay closed Petra G. • West Chester , PA • October 18, 2014
After having seen the video I installed the new lid and it worked.
Read more
More
$17.95
- Compare At:
-
$21.36
- You Save:
-
$3.41
Genuine Ge part
By: Ge
Part Number: WD12X10122
Replacement cap that seals the rinse aid dispenser on your dishwasher door. Replace if cracked, broken, warped from heat, or missing to prevent leaks.
Do-It-Yourself Stories from Customers like You
The vent part was broken and woulkd not stay in its place and kept falling out the rinse aid cap was broken also and ended up falling on the he4ating element and burnt Martha R. • Spring , TX • February 08, 2015
This was very simple. Thgey just popped back into place asnd the cap screws in.
Read more
More
$9.71
- Compare At:
-
$11.65
- You Save:
-
$1.94
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10488048
Washer won't start or shows door lock error? The door strike secures the latch for safe operation. Easy 5-minute fix with just two screws—video available.
Do-It-Yourself Stories from Customers like You
My son slammed the door to the washer closed and broke the striker latch Vernon S. • Harbor City , CA • June 02, 2014
Ordered the striker latch, it arrieved in two days, I removed the two screws holding the broken latch and installed the new latch, then put the two screws back in. Wam Bam, it was fixed, it was easy.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Speed Queen part
By: Speed Queen
Part Number: 205222
If your washer won't start or stops mid-cycle, the lid lock may be faulty. This kit includes the lock assembly and mounting hardware for secure operation.
More
$104.57
- Compare At:
-
$125.48
- You Save:
-
$20.91
Genuine Samsung part
By: Samsung
Part Number: DC66-00326A
Fix a washer door that won't close or lock with this door latch assembly. Typical repair for broken latches takes about 15 minutes. Easy DIY install.
Do-It-Yourself Stories from Customers like You
The door lacth was cracked Keanna D. • Littlerock , CA • September 23, 2014
I removed the wire and rubber seal in order to get to the door lacth then I unscrewed the three screws popped out the latch put the screws and the rubber and wire back and tested the washer. The door now locks and I can wash again...YEPPPPY
Read more
More
$15.36
- Compare At:
-
$18.43
- You Save:
-
$3.07
Genuine Bosch part
By: Bosch
Part Number: 00489674
Dishwasher door loose or cracked when opening? This handle replacement clips into place on the fascia panel. DIY-friendly repair in 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Broken fascia on Bosch dishwasher. Jerry's W. • Washougal , WA • November 19, 2017
The old fascia had broken and been torn off. I should have saved the buttons from it, but I didn't know that I'd be repairing it - I figured I would have to replace the unit. Well, money is tight, so I got the model number from the unit and looked up parts online. I couldn't find the exact model number on this site, but the picture of the fascia looked just like the picture in my manual, so I bought it, a handle strip, and a new set of buttons.
I pulled the stainless panel off the front, then...
Read more
More
$20.95
- Compare At:
-
$24.72
- You Save:
-
$3.77
Genuine Whirlpool part
By: Whirlpool
Part Number: W10861642
Fix F5 E3 error code or lid won't lock issues with this washer lid latch assembly. Direct replacement part. Most DIYers complete this repair in under 10 minutes.
Do-It-Yourself Stories from Customers like You
E3 F5 Stacy J. • Elk Grove , CA • August 03, 2018
In the past we’ve fixed the latch with just high speed great. This time we ordered a new latch and replaced it. Washing machine has been working perfectly ever since. It was very easy to find the right part by simply entering the model number of my washing machine. It was quick delivery and the correct part. Very happy to have a working washing machine again.
Read more
More
$110.42
- Compare At:
-
$131.40
- You Save:
-
$20.98
Genuine Ge part
By: Ge
Part Number: WD13X10045
Door won't open or handle feels loose? The handle actuator links your dishwasher handle to the latch. Easy DIY repair, typically under 1 hour with video.
Do-It-Yourself Stories from Customers like You
Dishwasher stopping mid cycle and beeping Robert D. • Lincoln , NE • January 30, 2015
I got on the site and shared my issue. It was determined my door switches were bad, as well as my actuator. I ordered the parts (which arrived in just 2 days!) and I fixed it myself in just under 10 minutes, for under $30.00. Thanks guys!!!!
Read more
More
$45.54
- Compare At:
-
$54.65
- You Save:
-
$9.11
Genuine Ge part
By: Ge
Part Number: WE4M448
Dryer shuts off mid-cycle or overheats? The outlet control thermistor monitors exhaust temperature. Moderately difficult repair requires drum removal.
Do-It-Yourself Stories from Customers like You
GE profile dryer shut off mid cycle Mark A. • Boynton Beach , FL • February 01, 2021
My first attempt was to replace the main board and then the thermistor, should have done this the other way around, turned out it was the thermistor, a pretty cheap part, dryer works great now. Repair requires removing the drum but overall not too difficult or time consuming.
Read more
More
$52.63
- Compare At:
-
$62.10
- You Save:
-
$9.47
Genuine Whirlpool part
By: Whirlpool
Part Number: 8184109
The Motor Spacer is an OEM part for Whirlpool microwaves. It is designed to support and position the turntable motor, ensuring it stays aligned and functions correctly. This spacer helps maintain the stability of the turntable, allowing even and consistent heating of food.
Causes of a bad motor spacer can include wear and tear over time, physical damage from heavy use, or misalignment due to accidental impacts. Regular inspection and maintenance can help identify issues before they lead to motor malfunction.
Symptoms of a bad motor spacer include:
- The turntable not rotating properly
- Unusual noises coming from the turntable area
- Inconsistent heating or cooking of food
- The turntable being unsteady or wobbling
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The turntable in the microwave stopped going around. David J. • Happy Valley , OR • November 20, 2017
Very easy fix. Unplugged microwave, then lowered bottom panel, removed the two leads to the turntable motor, removed two screws attached to motor, removed old motor, put new spacer on motor stem, installed motor with same two screws, reattached the two wires, reattached panel ( after cleaning all the grease that built up over the last 6 years), plugged microwave in and good as new! Took me twenty minutes. Note: the two screws holding the motor were not Phillips like those holding the panel. So...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8573713
Dryer won't heat? A failed thermal cut-off fuse cuts power when temps spike. DIYers replace this safety part in 20-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
My maytag gas dryer would start and the the tumbler rotate but the igniter would not glow and flame not start .gil P. • Enumclaw , WA • March 29, 2015
The 2 sensors that sit on top of the flame tube work together. The Thrmst F should check closed, as should the Cutoff-TML, in order for power to flow to the ignitor. If the Cutoff is open, it is usually because the Thrmst-F did not open soon enough. The Thermst-F will cycle, closed to open, and repeat, however the Cutoff-HTML is a one time switch. If it opens it will not return to closed, and subsequently the ignitor will not glow.
Some professionals say that if one of these sensors fail, both...
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31
Genuine Ge part
By: Ge
Part Number: WE01X29738
The Door Latch is an OEM part for GE dryers. It functions to securely fasten the dryer door shut during drying cycles. The latch fastens the door closed using a tension-based locking mechanism that engages automatically when closing the door.
Causes of a bad door latch can include loose or worn parts from continuous use over time. The locking mechanism may become improperly aligned or miscalibrated, inhibiting the secure closure of the door.
Symptoms of a faulty door latch include:
- Inability to start cycles with the door ajar
- Excessive moisture escaping around the edges of the poorly sealed door during drying
- Loud banging sounds from an improperly closing door
- Door popping open unintentionally mid-cycle
This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Latch on my ge dryer was broken and door would not stay shut Alan K. • Elk River , MN • February 03, 2026
I input the model number and description and found an immediate match from APP. I wasnt 100% sure on how to access the location once I received the part so I watched a couple video's on the site and they confirmed I was going in the right direction.
Read more
More
$17.60
- Compare At:
-
$21.12
- You Save:
-
$3.52
Genuine Ge part
By: Ge
Part Number: WD16X10011
Detergent cup won't stay closed? This dispenser latch secures the detergent cup during wash cycles. Direct replacement part with video guide available.
Do-It-Yourself Stories from Customers like You
Soap dispenser wouldn't close door kept falling down Graeme M. • Branford , CT • October 07, 2017
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then...
Read more
More
$21.40
- Compare At:
-
$25.68
- You Save:
-
$4.28
Genuine Ge part
By: Ge
Part Number: WD16X313
Dishwasher detergent cup won't stay closed or won't open fully? This soap dispenser lever controls detergent release. DIY repair in 15 minutes.
Do-It-Yourself Stories from Customers like You
Soap dispenser wouldn't close door kept falling down Graeme M. • Branford , CT • October 07, 2017
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then...
Read more
More
$25.95
- Compare At:
-
$30.88
- You Save:
-
$4.93
Genuine Frigidaire part
By: Frigidaire
Part Number: 316032411
Oven won't heat to correct temperature or won't turn off? The thermostat regulates oven heat. DIY repair typically takes 15-60 minutes with basic tools.
This part fixes the following symptoms
-
Oven is too hot
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Oven thermostat was broken Johnny C. • Laurel , MS • February 08, 2016
Removed old thermostat and pulled old thermocouple fron oven. ran new thermocouple to oven and put in clip, tistalled new thermostat using 2 phillips head screws, done.
Read more
More
$84.66
- Compare At:
-
$99.90
- You Save:
-
$15.24