Stud Parts

Replacement wheel for dishwasher lower rack. Attaches to the dishrack to allow smooth gliding during loading. Needed when wheels are cracked or worn.

Rear support wheel for dishwasher lower rack assembly. Replaces broken, cracked, or missing wheels that cause dragging or misalignment on the track.

Supports and allows the dryer drum to rotate smoothly. Replace if worn, cracked, or causing excess noise. Installs on the rear drum support frame.

Replacement drum support roller for dryers. Mounts on the axle to support the drum and enable smooth rotation. Replace if worn, cracked, or noisy.

Upper rack wheel and mount assembly for dishwashers. Mounts to the upper dishrack to allow smooth rolling. Replace if cracked, broken, or worn.

Replacement dishwasher rack wheel that guides smooth dish rack movement along the rail system. Needed when wheels are cracked, broken, or worn from use.

Replacement roller for dishwasher upper rack tub mount. Allows smooth gliding of the top rack during loading and unloading. Replace if cracked or worn.

Replace cracked, broken, or missing upper rack wheels that cause the top rack to slide poorly or fall off the rail. Includes roller and axle assembly.

Mounting stud secures components in your trash compactor. Replace if worn, stripped, or missing to restore solid fit and reduce looseness or vibration.

Supports and centers the dishwasher spray arm for smooth rotation. Replace if worn, cracked, or causing wobbling. Installs under spray arm hub.

This float stem is part of the dishwasher's water-level/overfill system. It guides the tub float and actuates the float switch so the unit fills correctly and shuts off on time. Replace a worn or broken stem to restore reliable fill protection.

• Connects the float to the switch mechanism beneath the tub
• Provides smooth vertical travel of the float through the opening
• Triggers the float switch to stop filling at the proper level
• Causes symptoms such as no fill, continuous filling/overfilling, a stuck or wobbly float, or intermittent fill issues

• Disconnect power at the breaker and shut off the water supply before servicing
• Remove the lower rack; lift off the float cap from inside the tub
• On some models, release the retainer/clip from beneath the tub; pull out the old stem
• Guide the new stem through the opening and ensure it engages the float switch lever; confirm the float moves freely and actuates the switch before restoring power

Secures the rack roller to the dishwasher tub wall for smooth gliding. Replace a cracked, broken, or loose mount to restore stable rack operation.

Replacement pulley that guides the drive belt in your dryer. Needed when the original pulley is worn, seized, cracked, or causing belt damage.

Replacement roller that helps a dishwasher rack glide smoothly along its track, restoring proper rack alignment and quieter operation. Fits where a worn or damaged wheel causes the rack to stick, wobble, or derail. What it does:

• Replaces a worn or broken rack wheel so the rack rolls smoothly on its track.
• Stops rubbing, grinding noise, and uneven movement caused by a damaged roller.
• Prevents the rack from coming off the track or tilting when loaded.
• Helps restore proper rack alignment for easier loading and unloading.

• Disconnect power and water to the appliance before starting work.
• Inspect the rack track and mounting clip; replace clips or retainers if damaged.
• Typically installs with basic hand tools (screwdriver/pliers) — match orientation to the original wheel.
• Test rack travel after installation to ensure proper seating and smooth operation.

This stud is a small mounting fastener that provides a secure anchor point for attaching appliance components. Replacing a worn or missing stud restores a tight, aligned fit and helps prevent looseness, rattles, or shifting.

• Provides a fixed, threaded anchor for mounting a handle, bracket, or panel
• Helps keep parts aligned and secure during normal operation
• Common replacement for studs that are stripped, bent, broken, or missing
• Symptoms can include a loose or wobbly component, difficulty tightening, or visible damage/corrosion

• Disconnect power and, if applicable, shut off water or gas before servicing
• Wear cut-resistant gloves and handle panels carefully
• Hand-start threads to avoid cross-threading; tighten snugly without over-torquing
• Reinstall any covers or related hardware in their original positions

Threaded metal shaft that mounts the idler roller in dryers and washer-dryer combos. Replace if bent, worn, or stripped threads prevent secure roller installation.