Tank Ce Line Mover Float Parts

This dome float is the replacement water-level float that helps the appliance sense and control the tub's water level, restoring reliable fill and shutoff behavior. Use this OEM-fit float when the original is cracked, stuck, or missing. What it does:

• Moves with rising and falling water to actuate the water-level mechanism and help prevent overfilling.
• Can reduce symptoms such as improper fill levels, continuous filling, or intermittent fill shutoff when the existing float is damaged or obstructed.
• Works as part of the washer's water sensing system—does not include electronic switches or housings unless shown.

• Disconnect power and unplug the appliance before starting any repair.
• Access may require removing the washer top or cabinet; follow your model's service instructions.
• Inspect surrounding hoses and clips; replace any damaged components and ensure the float moves freely.

Dishwasher overfilling or won't stop filling? This float switch lever activates the water level sensor. Simple DIY fix restores proper fill control.

Replacement water reservoir tank for side-by-side refrigerators. Stores and supplies water to the dispenser and ice maker. Replace if cracked or leaking.

Water backing up into your dishwasher after a cycle? The drain check valve prevents wastewater from flowing back. Moderate DIY repair with pump access.

This is an electrically operated water inlet valve that controls the flow of water into the dishwasher during the wash and rinse cycles. It opens when signaled by the control board to allow water to fill the tub and closes to stop the flow. Replace this valve if the dishwasher is not filling with water, filling too slowly, or if water continues to trickle in when the machine is off.

Bleach not dispensing or cup cracked? This washer bleach dispenser cup snaps into the top panel. Easy DIY fix—just push down to lock in place.

Replace your refrigerator's water storage tank if it's cracked, leaking, or broken. This reservoir installs inside the fresh food compartment to hold water.

Internal water reservoir that stores fresh water for your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or frozen solid.

Fix a dishwasher that won't fill or fills slowly with this water inlet valve. Restores proper water flow for normal wash cycles. Straightforward replacement.

This vent flapper is the exterior exhaust flap that opens to let dryer air and lint exit and closes to keep weather, pests and drafts out when the dryer is off. It restores proper airflow at the outside vent hood. What it does:

• Opens with dryer airflow to allow exhaust to escape and closes when idle to block outside air.
• Helps prevent backdrafts, pests and rain from entering the vent system.
• Can restore normal drying performance when a stuck or broken flap was restricting airflow.
• Commonly replaced when the flap is cracked, warped, jammed or does not seal.

• One vent flapper/exterior exhaust flap.

• Disconnect power to the dryer (and gas supply if applicable) and work from the outside hood when possible.
• Remove the exterior vent hood or access cover to inspect and replace the flap; basic hand tools required.
• Check that the flap moves freely after installation and seats against its seal to prevent air leaks.
• Clean or repair the ductwork to avoid repeat failures.

Molded plastic water collector that directs ice maker water to prevent pooling and leaks. Replace if cracked, broken, or missing to restore drainage.

Fix a dishwasher that won't fill with water or fills slowly with this water inlet valve. Common repair for no water flow issues. DIY-friendly fix.