10097210100 Parts

This cover screw secures appliance panels and covers, keeping components protected and aligned. Replace missing, stripped, or corroded screws to restore a tight fit and help eliminate rattles, gaps, or panels that won't stay in place.

• Attaches an access cover or panel to the appliance frame
• Helps maintain proper alignment to protect internal components
• Replaces missing, stripped, or rusted hardware
• Typical signs: loose or rattling panel, cover won't stay secure, damaged or rounded screw head

• Disconnect power before servicing
• Support the panel while removing and installing screws to prevent misalignment
• Start threads by hand to avoid cross-threading; do not overtighten
• Use a matching driver bit to avoid damaging the screw head

The Fuse is an OEM part for Whirlpool microwaves. It is a crucial safety component designed to protect the microwave from electrical surges and potential short circuits by breaking the circuit if the current flow exceeds safe levels.

Causes of a bad microwave fuse can include electrical surges, faulty wiring, or normal wear and tear over time. A blown fuse will render the microwave inoperable, as it cuts off the power supply to prevent further damage or hazards.

Symptoms of a bad microwave fuse include:

• The microwave not powering on
• The microwave stopping mid-operation
• No response from the control panel or keypad
• Sudden loss of power during use

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is a genuine lock nut replacement. This is a general piece of hardware that is often used on several types of lawn and garden equipment, including in engines, housing, and other areas. The exact application of this part will vary based on the unit. The lock nut is used to create a more secure seal than a standard nut. When properly secured, the lock nut tightens to a bolt and uses an extra locking washer with teeth to ensure a snug fit.If lock washers do get damaged or lost, they need to be replaced immediately with a genuine OEM replacement. This model is compatible with all types of machines and units since it is a generic part. The washer is sold as an individual part and manufactured by Whirlpool. Lock nuts will need to be installed using a socket wrench or adjustable wrench. Pliers, a screwdriver, or another socket wrench will be needed to hold the bolt while the lock nut is being secured in place. Be sure to thread the lock nut carefully to ensure a strong seal and avoid stripping the bolt or the nut.

The Lawn & Garden Engine Microswitch 2-Pin NC is an essential component for maintaining the functionality of your lawn and garden equipment. This genuine OEM part ensures reliable performance by accurately controlling the engineGÇÖs operations. Designed with precision, the microswitch features a durable 2-pin normally closed configuration, providing consistent and dependable switching capabilities. Compatible with a wide range of Samsung lawn and garden engines, this part guarantees a perfect fit and seamless integration into your existing machinery. Installing the Lawn & Garden Engine Microswitch 2-Pin NC is straightforward, allowing you to quickly restore your equipmentGÇÖs performance without hassle. By choosing this genuine OEM part, you benefit from high-quality materials and craftsmanship, ensuring long-lasting durability and efficiency. Whether youGÇÖre repairing a mower, trimmer, or other garden engine, this microswitch delivers the functionality you need to keep your equipment running smoothly and effectively.

The carburetor diaphragm is part of older model engines where a secure seal is needed. This diaphragm is installed on the carburetor and will help to ensure maximum engine operation. The carburetor is responsible for creating and providing the air/fuel mixture to the engine, and there are many working parts that help to ensure that happens, including the diaphragm. In the event that the seal isn't as tight as it should be or the carburetor seems to be performing less effectively, it might be time to replace this part. Replacing the diaphragm will restore the seal and ensure maximum engine operation, as well as prevent further damage to other parts. Make sure to wear gloves when working on engine parts and always disengage the engine and allow it to cool completely before starting repairs. This genuine OEM replacement part is designed for use on Briggs & Stratton engines, including 3-5 HP horizontal engines. It specifically fits those with the pulsa jet carburetor from previous generations. This part is made to exact manufacturer standards and complies with all guidelines and emission regulations.

This tube-pick up was created for three to five horsepower horizontal and five horsepower vertical engines with a two to three-quart tank and a pulse jet carburetor. As part of the carburetor, the tube-pick up moves gas from the float bowl to the main body of the carburetor. Sometimes the tube-pick up can become clogged up with particles and dirt, which makes it harder for gasoline to flow through it. This component can also become damaged or cracked, which means it will need to be replaced to operate the lawn equipment. Replacement requires removing the carburetor from the fuel tank, removing the tube-pick up and installing the new version. Carb cleaner may also be used in the process. This tube-pick up is a genuine OEM product directly from the manufacturer. It comes as an individual part and is made out of plastic. It is used for engines on leaf blowers, generators, tillers, lawn tractors, and lawnmowers by Simplicity, Briggs & Stratton, Cub Cadet, and Toro. A set of pliers may be needed to install the tube-pick up.

This ignition set consists of an ignition breaker and condenser. It is made of durable materials and uses a mechanical switch to close the electrical system and make a spark. If these parts are not working correctly or are broken, the engine on the lawn equipment will not start so the machine cannot be used. If the ignition set might not be working, use a spark tester with a plug lead to test. Place the control on stop or shut it off and attempt to turn on the engine using a key or cord. There should be no spark. When in the on position, a spark should be present. If the spark doesn't occur, there may be broken wires, grounds, shorts, or defects, so the parts will need to be replaced.This ignition set is a genuine OEM replacement part that was sourced directly from the manufacturer. It is sold as a single kit. The part is designed to be used in lawnmowers, tillers, leaf blowers, and snowblowers created by Cub Cadet, Briggs & Stratton, Broan, Lawn-Boy, and Toro.