23352713002 Parts

The Light Socket is an OEM replacement part for Broan range hoods. This electrical fitting provides a power connection point for light fixtures above stovetops. A faulty socket jeopardizes safe operation.

Causes of a bad socket can include loose wire connections allowing arcing or shorts, moisture intrusion corroding terminals, or cracking of plastic insulation. 

Symptoms of a bad light socket include: 

• Intermittent or non-functioning lights  
• Warm socket housing or abnormal smells/sounds
• Tripped breakers or blown fuses servicing the range hood

This OEM component fits additional brands like Thermador, Viking, and some Kenmore range hood models using equivalent Broan designs.

Secures the grease filter in your Allure range hood. This filter spring kit replaces worn or missing springs so the filter stays seated, reducing rattling and preventing the filter from dropping during operation.

• Applies spring tension to hold the grease filter in place
• Helps maintain proper airflow by keeping the filter fully seated
• Reduces vibration and noise from a loose filter
• Common symptoms: filter falls out, hangs loosely, or is hard to keep latched

• Disconnect power at the breaker before servicing the hood
• Remove the grease filter(s) to access the spring location
• Wear cut-resistant gloves; sheet metal edges can be sharp
• Ensure springs are fully seated in the factory slots/tabs, then test-fit the filter

This replacement motor powers the fan/blower in your ventilation unit to move air efficiently. Use it to restore airflow when the original motor becomes noisy, slow to start, or stops running altogether.

• Spins the blower/fan wheel to pull air through the unit and out through ducting or filters
• Maintains proper ventilation performance and airflow
• Common symptoms: fan won't start or only hums; runs slowly or stalls; excessive noise or vibration; intermittent shut-off/overheating
• Suitable replacement when the existing motor windings, bearings, or thermal protector have failed

• Disconnect power at the breaker before servicing; allow components to cool
• Access the motor by removing the grille/filters and blower housing as applicable
• Transfer the blower wheel and any reusable brackets/wiring from the old motor; align the shaft flat and secure the set screw
• Spin the wheel by hand to confirm free movement; test run before final reassembly

This factory replacement plate provides a rigid, stable mounting surface inside your unit. Replacing a bent or damaged plate helps keep internal components securely positioned and operating smoothly.

• Supports and locates attached components for correct fit and function
• Helps maintain alignment to reduce rubbing, vibration, or rattling noises
• Restores secure mounting when the original plate is bent, cracked, or missing
• Direct-fit replacement built to match the original footprint

• Disconnect power at the breaker before servicing
• Wear cut-resistant gloves; metal edges can be sharp
• Support attached parts and transfer any brackets or hardware from the old plate
• Tighten fasteners evenly before restoring power

This replacement switch restores reliable, positive control to your unit. Installing this part helps the connected component respond properly when you turn it on.

• Opens and closes the circuit to send power to the designated component within the unit
• Restores proper control when the original switch is worn, stuck, or arcing
• Common symptoms: no response when toggled, intermittent operation, or needing to jiggle/hold the switch
• Physical damage, discoloration, or a burnt smell from the switch body indicates replacement is needed

• Disconnect power at the breaker or unplug the unit before servicing
• Note wire positions; transfer leads one at a time to the new switch
• Ensure terminals are fully seated and mounting hardware is secure
• Test operation before reassembling panels or reinstalling covers

This replacement range hood filter set restores airflow and filtering performance in your hood. It helps capture cooking byproducts to keep the blower cleaner and the kitchen air clearer. What it does:

• Filters air drawn through the hood to help trap airborne cooking residue
• Helps protect the blower and internal surfaces from buildup
• Replace when saturated, damaged, or when airflow and odor removal decline
• A clogged or bent filter can cause weak suction, lingering smoke/odors, or rattling

• Two filters

• Disconnect power to the hood before servicing
• Support the filter, release tabs or latch, and remove the old filter
• Insert new filters in the same orientation; ensure they seat and lock securely
• Restore power and verify proper airflow and fit

Replacement fan blade designed to restore airflow and reduce vibration and noise in range-hood and ventilation fans. Replacing a damaged blade helps the blower run more smoothly and can prevent additional wear on the motor. What it does:

• Moves air when mounted to the blower motor shaft to maintain proper ventilation.
• Restores normal airflow when the original blade is cracked, bent, or missing.
• Reduces wobble, scraping, or rattling noises caused by damaged or unbalanced blades.
• Helps avoid extra motor strain and premature blower wear from an unbalanced assembly.

• Always disconnect power to the appliance before starting any service.
• Remove the hood grille or access panel and use basic hand tools to remove the old blade and install the replacement.
• Ensure the blade is correctly seated on the motor shaft and clears the housing before restoring power.

A small replacement mounting screw used to secure range hood and ventilation components. Restores loose or missing fasteners so panels and assemblies sit firmly and stop rattling or shifting during use. What it does

• Secures trim, grille, brackets or other small assemblies to the main housing
• Replaces a missing or stripped screw that causes rattling or loose parts
• Helps restore proper alignment of removable panels and covers
• Works as a direct fastener when the original screw is lost or damaged

• Turn power off to the appliance before working on vents or housings
• Use the matching screw hole and do not force a different-size fastener
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• If threads are damaged, replace the mating clip or insert before using this screw

This replacement name plate restores the exterior identification label on your appliance so model and rating information remain legible and the unit looks complete. It's a small cosmetic/identification part used on Broan ventilation products. What it does

• Replaces a torn, faded, or missing identification label so serial/model/rating text is readable
• Restores factory appearance and helps when checking model or wiring info
• Helps maintain resale value and compliance with visible appliance markings
• Does not affect mechanical function; strictly cosmetic/identification

• One replacement name plate as pictured

• Turn off and unplug the appliance or shut off power at the breaker before removing panels
• Clean and dry the mounting area before installing to ensure proper adhesion or fastening
• Reuse original fasteners or adhesive unless OEM instructions specify otherwise
• Handle edges carefully to avoid cuts; do not cover required safety or rating information

This is a genuine replacement mounting screw used to secure components on compatible Broan appliances, restoring proper fit and stopping loose or rattling parts. Simple fastener for reattaching panels, brackets, or covers. What it does

• Secures panels, brackets, or covers to prevent movement and vibration
• Helps stop rattling or buzzing caused by a loose fastener
• Restores a firm connection after a stripped or missing screw
• Used wherever the original mounting screw has corroded or been lost

• Use the matching screwdriver or driver bit to avoid stripping the head
• Tighten until snug; do not over-torque to prevent damage to threaded holes
• Disconnect power to the appliance and remove any panels if needed before servicing
• Inspect mating hardware and replace as necessary