34Ga-4T Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Appliance Light Bulb

4.9 (373)

By: Whirlpool

Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

Dimming or flickering light
Complete lack of illumination inside the appliance
Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

$17.76

Compare At:: $20.96
You Save:: $3.20

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Flat Style Oven Igniter Kit

4.9 (412)

By: Whirlpool

Part Number: 12400035

The Flat Style Oven Igniter Kit is an OEM part for Whirlpool ovens. It is designed to ignite the gas in the oven burner, facilitating the start of the heating process. This igniter is crucial for ensuring your oven heats up quickly and efficiently, providing the necessary flame for cooking and baking.

Symptoms of a bad Oven Igniter include:

The oven failing to heat up or taking a long time to reach the desired temperature.
A noticeable gas smell when the oven is turned on, indicating the gas is not igniting.
The igniter glowing without producing a flame, which can point to a lack of adequate temperature to ignite the gas.

Causes of a bad oven igniter can include the wear and breakdown of the igniter element over time, a faulty electrical connection, or a disruption in the gas supply.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling
Gas igniter glows, but will not light
Little to no heat when baking
Gas smell

Do-It-Yourself Stories from Customers like You Magic chef broken oven igniter Richard C. • Kew Gardens , NY • July 13, 2015

Followed linked video instructions and replaced with new flat style Oven Igniter Kit. Some repair info background, while out shopping for a replacement oven ($1000 plus) a terrific salesman listened to the issue with my current oven and recalled his same issue and solution. I thanked him for his time and recommendation. I went home and searched "oven Ignitor" where I was led to this website. The video showed the same exact flat oven igniter and how easy it would be to replace it. I immediately... Read more

$47.95

Compare At:: $57.06
You Save:: $9.11

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Temperature Sensor

4.8 (73)

By: Whirlpool

Part Number: 12001655

The Oven Temperature Sensor is an OEM part for Whirlpool ovens. It measures the oven's internal temperature and sends this information to the control board to maintain the desired cooking temperature.

Causes of a bad temperature sensor can include exposure to high temperatures over long periods, electrical issues such as short circuits, or physical damage due to impact or mishandling.

Symptoms of a bad temperature sensor include:

Inaccurate temperature readings
Oven not heating to the set temperature
Oven overheating
Error codes displayed on the oven control panel

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: For the long 6-inch sensor order 12001656.

This part fixes the following symptoms

Oven is too hot
Little to no heat when baking
Won't start
Oven not heating evenly

Do-It-Yourself Stories from Customers like You Oven did not keep correct or consistently correct temperature Keith J. • Antioch , IL • September 06, 2014

Online videos made this seem an easy fix. I unplugged the oven and removed the rear panel, then found where the temp sensor entered the oven. I unplugged the sensor's electric connector. Unlike the videos, this sensor screwed in from the inside of the oven, so I had to remove the 2 screws inside the oven which hold the sensor in place. Then I pulled the sensor out, careful not to tear the insulation with the wires and connector. Then I just pushed the new connector through the same hole and... Read more

$33.95

Compare At:: $40.40
You Save:: $6.45

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Broil Pan Set

5.0 (17)

By: Whirlpool

Part Number: 4396923

The Broil Pan Set is an OEM part for Whirlpool ovens. This set includes a broil pan and an insert, designed to catch drippings and ensure even heat distribution during broiling, allowing for perfectly cooked and crisp results.

Causes of a bad broil pan set can include prolonged exposure to high temperatures, which may lead to warping or distortion of the pan. Additionally, frequent use without proper cleaning can result in rusting, chipping, or buildup of residues that compromise the pan's functionality and safety.

Symptoms of a bad broil pan set include:

Warping or bending of the pan
Presence of rust or corrosion
Surface chipping or flaking
Difficulty in achieving even cooking results

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You There was no problem Harry M. • Olivebranch , MS • March 10, 2015

I ordered the brioler pan for my new stove from y'all it was a little small but that's the part number in the book that I got with the stoveyall did a great job fast shipping just what I ordered will by from again thanks Read more

$46.95

Compare At:: $55.40
You Save:: $8.45

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw, 1 Piece

4.9 (18)

By: Whirlpool

Part Number: W11233072

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

Fastens panels, brackets, covers, or internal parts to the chassis or frame
Helps maintain alignment and support, reducing rattle, vibration, or looseness
Replaces missing or damaged screws that have backed out, broken, or stripped
Restores secure mounting after service when original hardware is lost

What's included: 1 screw Install notes:

Disconnect power; shut off water or gas supplies before servicing
Use the correct driver; start threads by hand to avoid cross-threading
Match length and thread to the original location; do not substitute with longer hardware
Tighten snugly; do not overtighten into plastic or thin metal

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

$20.95

Compare At:: $24.93
You Save:: $3.98

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Oven Door Spring

5.0 (5)

By: Whirlpool

Part Number: WP7803P058-60

This oven door spring restores the door's counterbalance so it opens smoothly and closes firmly. Replacing a fatigued spring helps prevent heat loss and supports consistent baking by ensuring the door seals properly. What it does:

Provides tension to counterbalance the oven door through the hinge mechanism
Helps the door close fully against the gasket to retain heat
Restores smooth, controlled opening and closing action
Common symptoms of a worn spring: door drops or feels heavy, won't stay closed, heat escaping/uneven temperatures

What's included:

One oven door spring

Install notes:

Disconnect electrical power; turn off gas supply to the range if applicable
Springs and hinges are under tension—support the door/hinge and use caution
Note spring hook positions/orientation before removal; reinstall in the same locations
After replacement, verify the door closes fully and the seal is even

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You Oven door spring was broken Gerald G. • East Amherst , NY • March 28, 2015

It was a simple fix. I removed the six screws holding the side panel on the range. Removed the broken parks of the spring. I use a screwdriver to help stretch the new spring into place. I then replaced the side panel and screwed it on. About ten minutes work. Read more

$14.95

Compare At:: $17.94
You Save:: $2.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Square Gas Drip Pans

5.0 (4)

By: Whirlpool

Part Number: 1430283

By Maytag/Magic Chef. Set of 4 chrome square drip pans for gas ranges / cooktops. Fits many brands, including Maytag, Magic Chef, Admiral, Crosley, Norge, Jenn Air and others. Matching set of grates: 1430291.

Do-It-Yourself Stories from Customers like You Square gas drip pans Steve S. • Fruitland Park , FL • November 08, 2018

I just took the old ones out and put the new ones on Read more

$66.65

Compare At:: $79.98
You Save:: $13.33

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Infinite Switch (Surface Burner)

By: Whirlpool

Part Number: WP7403P190-60

This infinite switch controls an electric cooktop's surface burner by varying power to the element, letting you dial in and maintain precise heat. Replacing a failed switch restores smooth temperature adjustment and reliable simmer-to-boil performance. What it does:

Regulates AC power to the surface element based on the knob setting
Restores full range of heat levels from low simmer to high
Common failure symptoms: no heat, stuck on high, erratic temperature, or burner won't turn off
Can correct intermittent heating or a knob that turns without changing heat

What's included:

One surface burner infinite switch

Install notes:

Disconnect power at the breaker before servicing
Remove the control knob and access the console/panel to reach the switch
Transfer wires to the matching terminals on the new switch; secure the switch to the panel
Reassemble, restore power, and test the burner through all settings

Also known as: surface element switch, burner control switch

$60.68

Compare At:: $71.60
You Save:: $10.92

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Fluorescent Lamp - 26 Inches

5.0 (1)

By: Whirlpool

Part Number: WP95292

Size: 26 inches long. F18t8/cw/k26.

Do-It-Yourself Stories from Customers like You I had a dead front dual burner on our kitchen aid range no error code Francis V. • Shelton , CT • April 04, 2015

I replaced the controller. I had a heck of a time figuring out how to get to it. The video on the website showed access to the control via the rear panel. On the Kitchen Aid we have, the back panel is part of the range's main frame and does not come off. Turns out, 2 screws behind the fluorescent lamp had to be removed and the entire control panel housing lifts up and can be tilted forward. (I needed to clean behind the range anyway, so it was no big deal)!! The replacement part instructions... Read more

$62.95

Compare At:: $74.91
You Save:: $11.96

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Spacer - High

By: Whirlpool

Part Number: WP8010P069-60

This spacer maintains the correct gap between mating components inside your appliance, keeping parts aligned and operating smoothly. Replacing a worn or missing spacer restores proper fit and helps prevent rubbing, noise, and premature wear. What it does:

Sets and preserves the correct stand-off between components for proper alignment
Helps ensure smooth operation and consistent control feel
Reduces friction and contact that can cause noise or wear
Common failure signs: loose or wobbly parts, rubbing/scraping sounds, misalignment, poor fit

What's included:

1 spacer

Install notes:

Disconnect power and, if applicable, shut off gas supply before servicing.
Note the orientation of the original spacer and match it during reassembly.
Handle nearby trim and control components carefully to avoid damage.
After reassembly, verify smooth operation and proper clearances before restoring power/gas.

$6.66

Compare At:: $7.99
You Save:: $1.33

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Pin Hinge (Door Hinge Pin)

By: Whirlpool

Part Number: 7113P002-60

This genuine pin hinge secures and guides the appliance door, restoring smooth pivoting and proper alignment for reliable opening and closing. It's a direct-fit replacement designed to help stop door sag, binding, or uneven gaps. What it does:

Provides the pivot point that lets the door swing open and closed
Keeps the door aligned to the cabinet for a proper seal and even gap
Replaces worn or bent pins that cause door sag, scraping, or noisy operation
Helps restore smooth, wobble-free door motion

What's included: One pin hinge Install notes:

Disconnect power (and water for dishwashers) before starting work
Support the door during removal to prevent dropping or damage
Simple hand tools typically required; reuse original screws unless damaged
If the door has glass or heavy panels, get a helper to hold weight during installation

$7.79

Compare At:: $9.19
You Save:: $1.40

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Door Handle (30-Inch)

5.0 (1)

By: Whirlpool

Part Number: WP2411F013-71

30-inch door handle replacement that restores a secure grip and the door's appearance. Replaces cracked, loose, or broken handles so you can open and close the appliance door safely and with confidence. What it does:

Provides a comfortable, secure grip for opening and closing 30-inch appliance doors.
Replaces damaged, loose or broken handles to restore normal door operation and appearance.
Designed as a direct replacement for the factory door handle mounting pattern.
Helps prevent accidental drops or slippage when opening a hot or heavy oven/range door.

What's included: One 30-inch door handle. Install notes:

Always disconnect power to the appliance and allow it to cool before beginning any repair.
Support the door during removal and installation; have a helper if the door is heavy or awkward.
Use the correct screwdriver or bit for the mounting screws and keep removed hardware organized for reinstallation.

Do-It-Yourself Stories from Customers like You Stove handle Brenda A. • Monroe , LA • June 18, 2020

It worked great, fit perfect. Now I have a stove with a new handle. Thanks. Read more

Genuine Whirlpool part

Knob-Clock

By: Whirlpool

Part Number: W11238392

Genuine Whirlpool part

Spark Module

4.8 (8)

By: Whirlpool

Part Number: 1430322

For top surface burners. Configuration: 2 + 0.

Do-It-Yourself Stories from Customers like You Failed spark module Thomas B. • Hillsborough , NJ • October 22, 2018

The spark module for my 1990 Caloric Model RSS398 Natural Gas double oven range stopped functioning. I tried to get the part at a local appliance parts store and was unsuccessful as they said the part was discontinued. I called the Appliance Parts Pros help line and spoke to an excellent service tech who took the time and made the effort to reference, cross reference, and find a part that was different in configuration, but functionally the same. The replacement part required modifications... Read more