362B1230pool Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Appliance Light Bulb

4.9 (373)

By: Whirlpool

Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

Dimming or flickering light
Complete lack of illumination inside the appliance
Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

$17.76

Compare At:: $20.96
You Save:: $3.20

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Stove Top Drip Pan

4.9 (224)

By: Whirlpool

Part Number: WPW10196405

The Stove Top Drip Pan is an OEM replacement part for Whirlpool ranges. It is the shallow metal pan located below the stove burner elements that collects grease and food particles. The drip pan helps direct spills and drips away from the burner area to the bottom drawer for easy cleanup.

Symptoms of a bad drip pan include:

Grease or food spilling below the burners outside of the pan
Burner elements showing signs of corrosion or damage from drips
The drip pan no longer fitting properly or securely in place

Causes can be warping or damage of the drip pan over time due to exposure to heat. Dents and structural changes compromise its ability to direct drips properly.

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

If you require a compatible 6-inch drip bowl, suggest considering our WPW10196406 model for a perfect fit. For a black option include the 6-inch W10290353RW and 8-inch WPW10290350 models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Our range needed 4 new range top elements due to wear Dale D. • Orlando , FL • December 05, 2014

Personally I have experience working with electricity and knowing if I bought the part required this would be an easy fix. I got my model number and contacted Appliance Parts Pros and placed my order for the new elements, terminal blocks, and for appearance purposes 4 new Drip Pans. Excellent service and quick shipping. I ordered my parts on Sunday and received them on Tuesday. This was a simple repair that only required a screwdriver to remove the old terminal block from the range hood, wire... Read more

$9.95

Compare At:: $11.94
You Save:: $1.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Stove Top Drip Pan

4.9 (186)

By: Whirlpool

Part Number: WPW10196406

The Stove Top Drip Pan is an OEM replacement part for Whirlpool ranges. It is the shallow metal pan located below the stove burner elements that collect grease and food particles. The drip pan helps direct spills and drips away from the burner area to the bottom drawer for easy cleanup.

Symptoms of a bad drip pan include:

Grease or food spilling below the burners outside of the pan
Burner elements showing signs of corrosion or damage from drips
The drip pan no longer fitting properly or securely in place

Causes can be warping or damage of the drip pan over time due to exposure to heat. Dents and structural changes compromise its ability to direct drips properly.

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This drip pan measures about 7-2/3 inches in diameter. Matching 8 inch drip bowl: WPW10196405. Same drip bowls in porcelain black: 6 inch W10290353RW and 8 inch WPW10290350. You may also consider buying a second set for when company comes over or for the holidays.

Do-It-Yourself Stories from Customers like You Our range needed 4 new range top elements due to wear Dale D. • Orlando , FL • December 05, 2014

$10.47

Compare At:: $12.46
You Save:: $1.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Terminal Block

4.8 (36)

By: Whirlpool

Part Number: WPW10245259

The Terminal Block is an OEM part for Whirlpool ranges. It serves as a crucial connection point for the range’s electrical wiring, ensuring a safe and reliable transfer of power to the appliance.

Over time, terminal blocks can deteriorate due to factors such as heat exposure, electrical surges, or wear and tear. When the terminal block becomes damaged or corroded, it can lead to poor electrical connections or potential safety hazards.

Symptoms of a bad terminal block include:

Burnt or scorched connections
Intermittent power loss to the range
Difficulty in the range heating up properly
Visible damage or corrosion on the terminal block

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Won't start
Element will not heat
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Oven would only heat up to 347° f in bake mode Chris M. • Scottsdale , AZ • October 25, 2021

I determined the hidden bake element below the oven cavity was not working, because the bottom of the oven was cold during normal use. If you have a built-in microwave + oven combination (mine is KitchenAid Model No. KEMS308SSS05), this is a difficult repair. The engineer who designed this oven should be invited to succeed elsewhere. It is impossible to access the bake element from the inside of the oven, so the How To video associated with this part will not help you. I had to remove the... Read more

$26.95

Compare At:: $32.07
You Save:: $5.12

IN STOCK

Ships Today Guaranteed

Add to Cart

Do you need help?

Get Questions Answered Instantly.

1-877-477-7278 Online

Live Help

Best Seller

Genuine Whirlpool part

6 Inch Small Surface Element

4.9 (130)

By: Whirlpool

Part Number: WP660532

The 6 Inch Small Surface Element is an OEM part for Whirlpool electric ranges and cooktops. This component is essential for providing consistent, controlled heat to cookware on the stovetop.

Symptoms of a bad 6 Inch Small Surface Element include:

Lack of heat production, with the element failing to warm up at all.
Inconsistent heating, where the element may fluctuate in temperature or only partially heat.
Visible damage such as blistering, bubbling, or cracks on the element's surface.
A tripped circuit breaker when the element is turned on, indicating a short.

Causes of a bad surface element can include prolonged use leading to element burnout, electrical faults such as faulty wiring or internal failures, and physical damage from impact or heavy cookware being dropped on the element.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

8-inch element is part number WP660533.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Our range needed 4 new range top elements due to wear Dale D. • Orlando , FL • December 05, 2014

$28.25

Compare At:: $44.73
You Save:: $16.48

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Drip Pan (Sm)

4.9 (38)

By: Whirlpool

Part Number: W10196406RW

The Stove Top Drip Pan is an OEM replacement part for Whirlpool gas and electric ranges. It is located underneath the stove burners and grates to catch and contain grease drippings and spills. Over time, grease and cooking residue buildup can cause drip pans to crack, warp or corrode.

Symptoms of a bad stove top drip pan include:

Grease spillovers outside of the drip pan area
Flames or heating elements obstructed by built-up debris
Warping or cracking of the pan surface
Difficulty removing or cleaning the drip pan

Causes can be normal wear from heat and long-term grease exposure. Accidental damage during cleaning is also possible.

This OEM part is also compatible with Maytag, Jenn-Air, Amana and some Kenmore models.

Do-It-Yourself Stories from Customers like You Drip pans needed replacing. Lynn J. • Palo Pinto , TX • January 20, 2020

Ordered new drip pans from Appliance Parts Pros, hoping they'd fit perfectly...and THEY DID! We are so happy with them. The ones at other places didn't. Read more

$14.62

Compare At:: $17.40
You Save:: $2.78

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Door Gasket

5.0 (20)

By: Ge

Part Number: WB35X29720

The Gasket Door Assembly is an OEM replacement part for GE ovens. This gasket provides a seal around the oven door, ensuring that heat is retained inside the oven for efficient cooking and baking. It helps to maintain the correct temperature and prevents heat from escaping, which can affect cooking performance and energy efficiency.

Causes of a bad gasket door assembly can include regular wear and tear, exposure to high temperatures, and physical damage such as cuts or tears. Over time, the gasket can lose its elasticity and sealing capability.

Symptoms of a bad Gasket Door Assembly include:

Heat escaping from the oven door
The oven taking longer to preheat or maintain temperature
Uneven cooking or baking results
Visible damage or gaps in the gasket

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Oven gasket was loose on one side(gasket torn around clips) Nathan E. • Cheboygan , MI • May 09, 2015

Ordered New Gasket and installed in about 3-4 Minutes. Only need small pliers to remove some of old clips from holes. New Gasket clipped in easily by hand. Read more

$16.72

Compare At:: $19.90
You Save:: $3.18

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Infinite Switch Top Burner Control Switch

4.9 (90)

By: Whirlpool

Part Number: WP7403P239-60

The Whirlpool Infinite Switch is an OEM part for Whirlpool ranges. Whirlpool electric ranges. This switch controls the multiple heat settings of the large element, allowing the user to select their desired cooking temperature. It is an important electrical component that regulates burner heating cycles.

Symptoms of a bad infinite switch include:

The element not heating up adequately or failing to maintain temperature
Inability to select or change heat settings on the
Burner operates intermittently or fails to heat properly

Causes of a bad infinite switch can include failure over many heating cycles. The electrical contacts within the switch may become corroded or deteriorate from repeated exposure to cooktop temperatures and cooking residue.

It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric range models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You The right front "large' heating element was in high heat mode rotating the control knob to a lower heat setting would not reduce heat Jack D. • Roanoke , VA • November 17, 2014

1. Went online where I watched video about heat control for this Maytag. I then found AppliancePartsPros using Google. I ordered the part and In three days the part arrived. I installed the part and now the problem has been corrected. Read more

$34.95

Compare At:: $50.69
You Save:: $15.74

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Bake Element

4.9 (191)

By: Whirlpool

Part Number: WP74003019

This OEM Replacement Part is a bake element designed for Whirlpool electric ovens. It measures approximately 19 1/4 inches wide and 15 1/2 inches deep. The element extends about 3 inches past the bracket to the terminals. The element, positioned at the bottom of the oven cavity, supplies heat for baking. It features male spade connectors with push-on wire terminals. If your oven experiences uneven heating, lack of heat, or minimal heat during baking, replacing this part may be necessary.

Ensure the range is unplugged or the house circuit breaker for the range is shut off before installation. The element provides 2100 watts on 208 volts and 2800 watts on 240 volts. Removal involves unscrewing Phillips screws above the element brackets and detaching the wire harness without losing wires. Inspecting the wire terminals for any signs of arcing or burning during removal is recommended.

This part fixes the following symptoms

Little to no heat when baking
Oven not heating evenly
Oven is too hot
Won't start

Do-It-Yourself Stories from Customers like You Oven bake element stopped working Belle K. • Anaconda , MT • August 29, 2014

I'm a 66 year old woman (on a fixed income) and I'd never before repaired an oven bake element . My stove is 20 years old but I still found it was much more affordable to change the bake element rather than buying a new stove. I called the number on the website and talked to a very informative woman. She answered all the questions I had about my stove. She told me about the repair video on the website which had step-by-step instructions. I ordered a new element - received it within 4 days.... Read more

$48.95

Compare At:: $58.74
You Save:: $9.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Rack

5.0 (38)

By: Ge

Part Number: WB48T10095

The Oven Rack is an OEM part for GE ranges, providing a sturdy and reliable platform for baking and roasting a variety of dishes. Its design allows for easy placement and removal from the oven, offering flexibility in cooking heights and accommodating different sizes of bakeware.

Causes of a bad Oven Rack can range from excessive weight being placed on the rack, exposure to high moisture levels leading to rust, or simply the age-related wear and tear that comes from regular use.

Symptoms of a bad Oven Rack include:

Warping or bending, which can prevent the rack from sitting level in the oven and affect cooking performance.
Rust or corrosion, which can weaken the rack's structure and potentially contaminate food.
Difficulty sliding the rack in and out, which may indicate damage or misalignment.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Stove was missing rack Jack S. • Cloverdale , CA • December 30, 2014

Orded rack by stove model number. fit perfect Read more

$64.35

Compare At:: $76.58
You Save:: $12.23

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.9 (14)

By: Whirlpool

Part Number: WP3387230

The Whirlpool screw is an OEM replacement part responsible for securely fastening various components and parts within Whirlpool appliances. These screws are essential for maintaining the structural integrity and safe operation of the appliance. These screws hold together critical components like panels, brackets, handles, and internal parts.

This part fixes the following symptoms:

Loose or wobbly handles on refrigerators, ovens, or other appliances
Vibrations or rattling noises during appliance operation
Inability to assemble or disassemble parts during appliance repair or maintenance

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You The lint catch was broken Misti P. • Spokane , WA • January 18, 2019

This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more

$8.36

Compare At:: $9.95
You Save:: $1.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Rack

5.0 (26)

By: Whirlpool

Part Number: WPW10282492

The Oven Rack is an OEM part for Whirlpool ovens. It provides a sturdy and reliable surface for baking and roasting a variety of dishes. Designed to fit perfectly within Whirlpool models, this rack ensures optimal air circulation around the food, contributing to even cooking and browning.

Causes of a bad Oven Rack can include warping or damage from high heat, rusting from moisture exposure, or general wear and tear over time. Misshaping or instability can also result from placing too much weight on the rack or using it inappropriately.

Symptoms of a bad Oven Rack include:

Difficulty sliding the rack in or out.
Uneven cooking or baking due to improper leveling of the rack.
The rack does not fit securely in the oven slots.
Visible rust or damage, which could potentially contaminate food.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Oven racks no longer shiny Ron N. • Menomonee Falls , WI • September 15, 2014

Appliances will be sold with the house so the old oven racks were no longer shiny. Replacement racks present a better looking oven. Read more

$52.32

Compare At:: $61.74
You Save:: $9.42

IN STOCK

Ships Today Guaranteed

Add to Cart

Shop With Confidence

Over 15 million customers served!

365-Day Returns

Hassle-free Returns

Fast Delivery

1.7 Days on Average!

Free Tech Support

On all purchased parts!

Best Seller

Genuine Ge part

Double Burner Kit

5.0 (45)

By: Ge

Part Number: WB16K10026

The Double Burner Kit is an OEM part for GE gas ranges. This kit includes the necessary components to replace the double burner, which is crucial for efficient cooking on GE gas stoves. The double burner provides two separate flame sources, allowing for versatile cooking options with different heat levels.

Causes of a bad double burner can include normal wear and tear, clogs from food debris, exposure to high temperatures, or physical damage. These issues can hinder the burner's performance and safety.

Symptoms of a bad double burner include:

Uneven or weak flames
One or both burners not igniting
Difficulty in adjusting the flame size
Noticeable gas odor when the burner is off

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Dirty burner assemblies and worn and flakig burner grates Yvonne R. • Fernley , NV • March 11, 2015

Purchased new burner assemblies and burner grates from Appliance Parts Pros to replace old, worn out ones. This job was easy as all parts purchased were unpack and place. My range is about 15 years old but is in pristine condition so instead of replacing the range, I chose to replace dirty, worn parts. Read more

$55.95

Compare At:: $68.17
You Save:: $12.22

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Terminal Block Kit

4.9 (68)

By: Whirlpool

Part Number: 12001676

The Terminal Block Kit is an OEM part for Whirlpool cooktops. It is a crucial component that provides a secure connection point for electrical wires and cables within the appliance's control system.

Symptoms of a faulty terminal block kit:

Intermittent power supply or electrical issues
Burnt or melted wires or connectors
Appliance not receiving or responding to electrical signals correctly
Visible damage or corrosion on the terminal block

Causes of a bad terminal block kit include excessive heat exposure, loose connections, moisture or water damage, or simply wear and tear over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Element will not heat
Won't start

Do-It-Yourself Stories from Customers like You No power to both burners in removable tray of c203 unit Eric O. • Southbury , CT • April 07, 2017

Full disassembly of removable tray into top plate (stainless) and lower pan taking care not to loose fasteners. Removal of terminal blocks using lubrication on rusted screws and, if necessary, drill out technique. Unclip wires from edges of the tray on both sides without losing the clips for future re-use. Top plate is now completely free of connections and may be cleaned/scrubbed separately in advance of re-assembly. Unfasten spade insulation block (located in the front of the tray) after... Read more

$16.95

Compare At:: $20.34
You Save:: $3.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Broiler Pan Kit

5.0 (46)

By: Ge

Part Number: WB48X10056

The Broiler Pan Kit is an OEM part for GE ranges. It serves as a secure platform for positioning meats, vegetables, and various foods directly beneath the broiler element, ensuring safe and efficient cooking. The pan is about 17 inches wide by 13 inches deep.

Over time, wear and tear can affect broiler pans, causing issues such as flaking or stripping of the non-stick coating and the development of small ridges or holes that permit grease to drip down.

Symptoms of bad broiler pans include:

Grease fires caused by dripping grease contacting the heating element
A burnt or smoky flavor transferring to foods
Difficulty removing baked-on grease and food deposits
Pans that are misshapen or developing small cracks

This OEM GE replacement part is also compatible with select Hotpoint, RCA, and some Kenmore ranges

Do-It-Yourself Stories from Customers like You None Ralph W. • Brentwoo , NY • July 13, 2014

Fast delivery, great service Read more

$26.95

Compare At:: $32.34
You Save:: $5.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Bottom Oven And Deflector Assembly

5.0 (27)

By: Ge

Part Number: WB35X37973

The Bottom Oven and Deflector Assembly is an OEM part for GE ovens. It serves the dual purpose of acting as a base for the oven and deflecting heat for more efficient cooking.

Causes of a bad Bottom Oven and Deflector Assembly can include exposure to high heat over extended periods, accidental impact or mishandling, and general wear and tear from regular use.

Symptoms of a bad Bottom Oven and Deflector Assembly include:

Uneven cooking or baking results
Visible cracks, warping, or damage to the assembly
Unusual noises during oven operation
Difficulty in maintaining set oven temperatures

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Abused grates and oven bottom Adrienne T. • Port Jervis , NY • June 26, 2015

Ordered parts ( very easy) and replaced old ones . Pop out, pop in. Simple but it made my stove and oven new again. Read more

$88.25

Compare At:: $105.90
You Save:: $17.65

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

362B1230pool Parts

Appliance Light Bulb

Stove Top Drip Pan

Stove Top Drip Pan

Terminal Block

6 Inch Small Surface Element

Drip Pan (Sm)

Door Gasket

Infinite Switch Top Burner Control Switch

Oven Bake Element

Oven Rack

Screw

Oven Rack

Double Burner Kit

Terminal Block Kit

Broiler Pan Kit

Bottom Oven And Deflector Assembly