Awn542sp111w01 Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Idler Lever Kit is an OEM replacement part for Speed Queen dryers. This kit includes the idler lever, which plays a key role in maintaining proper tension on the dryer drum belt. By ensuring the belt stays aligned and taut, the idler lever enables smooth drum rotation during the drying cycle.

Symptoms of a bad Idler Lever Kit include:

• A squealing or screeching noise during dryer operation
• The drum not spinning or rotating properly
• The belt appearing loose or slipping off the pulley

Causes of a failing Idler Lever Kit can include normal wear and tear over time, damage from excessive strain or overloading, or misalignment of the drum or belt.

This OEM Speed Queen part is also compatible with Alliance laundry equipment.

The Drain Pump is an OEM part for Speedqueen brand washing machines. Located near the rear of the washer tub, the drain pump works to empty water from the machine at the end of each cycle. It functions through an electrical motor that activates a spinning impeller, forcing water through the drain hose. 

Symptoms of a bad drain pump include:

• Washer fails to fully drain or leaves standing water 
• Drain cycle takes an unusually long time to complete
• Loud grinding or rattling sounds coming from inside

Over time, a buildup of lint or mineral deposits inside the pump chamber can clog the impeller and reduce efficiency. Allowing water to sit for extended periods also promotes mold growth. Replace your drain pump today with this genuine Speedqueen part and restore full draining capability.
 

This Washer Lid is an OEM replacement part for Speed Queen washers. It serves as the main cover and provides access to load and unload clothes during washing and rinsing cycles. The lid must be sealed tightly to minimize noise and ensure optimal energy efficiency.

Causes of a bad lid include long-term exposure to heat and moisture during use, impact or other physical damage.

Symptoms of a bad lid include:

• Excessive noise during spinning or agitation cycles
• Long wash times and higher energy bills due to leaks
• Difficulty opening or closing the lid securely
• Warping or bulging appearance

This OEM Speed Queen part is also compatible with American Dryer Corporation and Continental clothes washers.

This is a control knob for washing machines. This control knob is used to adjust the water temperature and level settings on the unit. It is manufactured out of a white plastic. The replacement is very easy and takes less than 15 minutes to complete. All that this process involves is pulling the old knob off and sliding the new knob on.A new control knob will be needed if the original is cracked, broken, or damaged in any way. Over time, the white plastic may begin to yellow, and the user may wish to replace the control knob for cosmetic purposes. If the knob is not actuating the desired cycle, it will need to be replaced.This control knob is a genuine SpeedQueen part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific control knob is compatible with washing machines that are manufactured by the SpeedQueen brand.

This timer knob assembly restores smooth, accurate cycle selection on your top-load washer. Replace a cracked or stripped knob to regain positive control of the timer without slipping or forcing the shaft.

• Attaches to the timer stem so you can select wash cycles and start the washer
• Replaces a knob that is cracked, stripped, loose, or missing
• Helps when the timer won't turn properly with the knob or the knob won't stay on
• Restores positive engagement with the timer for consistent operation

What's included: 1 timer knob assembly Installation notes:

• Disconnect power before servicing
• Pull the old knob straight off; some models use a small retaining clip
• Align the new knob with the timer stem and press firmly until fully seated
• Do not force the timer shaft; inspect for damage if the knob won't seat

This mixing valve blends hot and cold water to deliver a consistent, tempered supply to the machine. Replacing a worn valve helps restore proper fill temperature control and dependable washing performance.

• Regulates and mixes incoming hot and cold water to a set outlet temperature
• Helps maintain stable warm water fills during cycles
• Designed to fit and function like the original component it replaces

• Disconnect power and shut off both water supplies before service
• Place a towel or pan to catch residual water when removing hoses
• Note hose orientation and tighten fittings securely to prevent leaks
• After installation, restore water and power, then check for leaks and proper fill temperature

Note: DO NOT use any sealant other than 200996P Sealant.

This upper and lower bearing set supports the rotating shaft assembly, helping it turn smoothly and quietly. Replacing worn bearings reduces noise and vibration and protects adjacent components from accelerated wear. What it does:

• Provides radial support so the shaft/drum rotates freely with minimal friction
• Worn bearings can cause rumbling, squealing, or grinding during operation
• Can show play at the shaft or metallic dust near the bearing area

What's included:

• 1 bearing

Install notes:

• Disconnect power and shut off water/gas before servicing
• Access the bearing housing; use a press or proper driver to remove/install bearings—do not strike the races
• Note bearing orientation and seating depth; install squarely and fully
• Inspect the shaft and any related seals/housings and replace if worn or damaged

This idler pulley wheel keeps the drive belt aligned and under constant tension so the drive system runs smoothly and quietly. Replacing a worn wheel helps eliminate belt squeal and prevents premature belt wear or slippage.

• Maintains proper belt tension on the idler arm and guides the belt during operation
• Provides low-friction rotation for smooth belt tracking
• Common symptoms of a worn wheel: squealing/squeaking, frayed or glazed belt, belt slipping off, or intermittent/no drive
• Helps restore reliable belt traction and reduce noise

• Disconnect power and wear work gloves before servicing
• Access the drive system and note the belt routing for reassembly
• Release belt tension, remove retaining hardware, swap the wheel on the idler arm, and re-tension the belt
• Spin the new wheel by hand to inspect belt and idler arm/spring and replace if worn

This timer skirt is the bezel that sits behind the timer knob on the control panel. It replaces a cracked or missing ring so you can securely turn the knob and select settings.

• Sits around the timer shaft as the cosmetic/structural ring behind the knob
• Supports and stabilizes the timer knob during setting selection
• Replaces a cracked, warped, or missing bezel that causes a loose or wobbly knob
• Typical symptoms include a broken ring, misaligned knob, or difficulty selecting settings

• Disconnect power before servicing
• Pull off the timer knob; remove any retaining clip or nut if present
• Remove the old skirt; align and seat the new skirt in the control panel
• Reinstall the knob and verify smooth operation

This mechanical timer governs the sequence and duration of each programmed cycle on 115V/60Hz machines, advancing steps automatically for consistent, reliable operation. It restores proper cycle timing when a worn timer sticks or fails to advance.

• Controls cycle timing via a motor-driven cam and internal contacts
• Advances the program and switches circuits at set intervals
• Symptoms of a failing timer include: cycle won't start or advance, stops mid-cycle, runs continuously, or ends prematurely
• Also causes erratic timing or skipped steps

• Disconnect power before servicing; work carefully around sharp cabinet edges
• Photograph or label wiring and transfer leads one at a time to the new timer
• Remove the control knob/escutcheon as needed, swap the timer, and align the shaft before tightening
• After installation, run a short test cycle to ensure proper advance and shutoff

A 10 oz cartridge of OEM-specified sealant used to reseal washer assemblies. It forms a flexible, watertight bead to help stop leaks and restore proper sealing around tubs, boots and related joints. What it does:

• Seals gaps and joints around tubs, door boots and panel seams to reduce water leaks
• Bonds to typical appliance surfaces (metal, rubber, many plastics) for a durable seal
• Helps prevent moisture intrusion that can lead to corrosion or interior water damage
• Supplied to OEM specification for correct form and performance in appliance repairs

• Remove old sealant and thoroughly clean and dry surfaces before applying
• Cut nozzle to size and apply an even bead; smooth with a tool or gloved finger for best contact
• Use gloves and eye protection; work in a well-ventilated area and follow label safety directions
• Allow the sealant to fully cure per the manufacturer's instructions before returning the appliance to service

This variable pressure switch senses water level and signals the washer to stop filling, helping maintain correct fill levels for reliable cycles. It replaces a failed or intermittent level-control switch to restore normal filling behavior. What it does:

• Detects drum water level and tells the control when to stop filling
• Helps prevent overfilling or underfilling caused by a bad level signal
• Resolves symptoms like no fill, overfill, or erratic cycle advancement
• Works as the washer's water-level sensor interface to the main control

• One variable pressure switch

• Disconnect power (and water if applicable) before servicing
• Replace only with the exact part number; match electrical connector and hose fittings
• Handle the pressure hose and terminals carefully to avoid damage

This left-side white panel end replaces a damaged or worn corner trim on the control console or front fascia to restore appearance and protect edges. Designed to match original fit and finish on compatible Speed Queen units. What it does:

• Covers and protects the left edge of the console/front panel from bumps, wear, and moisture.
• Restores a clean, finished look when the original panel end is cracked, chipped, or missing.
• Helps maintain proper alignment and support for adjacent trim and fasteners.
• Fits in place of the factory left-side panel end for straightforward cosmetic repair.

• Designed for direct replacement; reinstall using original screws/clips when present.
• Inspect adjacent trim and fasteners; replace any damaged clips to ensure secure fit.
• Power down and unplug the appliance before attempting any repairs that require panel removal.

A replacement tub cover gasket assembly that seals the washer tub to help prevent leaks and protect internal components. Restores the tub-to-cover seal so your washer can hold water and operate reliably. What it does:

• Forms a watertight seal between the tub cover and tub to reduce dripping or pooling around the cabinet.
• Helps prevent detergent and soil from entering the cabinet or suspension area.
• Addresses symptoms like visible leaks at the top of the tub, water on the floor near the washer, or a damaged/torn seal.
• Replaces worn or cracked gasket material that can fail over time.

• One tub cover gasket assembly (cover with gasket)

• Disconnect power and turn off the water supply before starting any repair.
• Basic hand tools are typically required; the cover may need to be removed to access the gasket seating area.
• Inspect surrounding clips, fasteners, and sealing surfaces for damage and replace as needed for a complete seal.