Cwg3100aabmm Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Appliance Light Bulb

4.9 (372)

By: Whirlpool

Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

Dimming or flickering light
Complete lack of illumination inside the appliance
Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

$17.76

Compare At:: $20.96
You Save:: $3.20

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Igniter

4.9 (251)

By: Whirlpool

Part Number: 74007498

The Oven Igniter is an OEM part for Whirlpool ovens, designed to ignite the gas in the oven burner, allowing it to heat. This crucial component is responsible for creating the spark that starts the combustion process, enabling your oven to reach the desired temperature for baking or broiling.

Causes of a bad oven igniter include wear and tear from regular use, a buildup of residue that can inhibit the igniter's ability to heat properly, or electrical issues that prevent the igniter from drawing enough current.

Symptoms of a bad Oven Igniter include:

Oven not heating up at all
Oven takes longer than usual to heat up
Gas smell when the oven is turned on, indicating gas is not igniting

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Little to no heat when broiling
Gas igniter glows, but will not light
Gas smell
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Oven ignigter not working. Joan R. • Mount Judea , AR • March 20, 2014

I used the little video clip shown under the part and replaced it myself. Read more

$52.95

Compare At:: $84.49
You Save:: $31.54

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Flat Style Oven Igniter Kit

4.9 (412)

By: Whirlpool

Part Number: 12400035

The Flat Style Oven Igniter Kit is an OEM part for Whirlpool ovens. It is designed to ignite the gas in the oven burner, facilitating the start of the heating process. This igniter is crucial for ensuring your oven heats up quickly and efficiently, providing the necessary flame for cooking and baking.

Symptoms of a bad Oven Igniter include:

The oven failing to heat up or taking a long time to reach the desired temperature.
A noticeable gas smell when the oven is turned on, indicating the gas is not igniting.
The igniter glowing without producing a flame, which can point to a lack of adequate temperature to ignite the gas.

Causes of a bad oven igniter can include the wear and breakdown of the igniter element over time, a faulty electrical connection, or a disruption in the gas supply.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling
Gas igniter glows, but will not light
Little to no heat when baking
Gas smell

Do-It-Yourself Stories from Customers like You Magic chef broken oven igniter Richard C. • Kew Gardens , NY • July 13, 2015

Followed linked video instructions and replaced with new flat style Oven Igniter Kit. Some repair info background, while out shopping for a replacement oven ($1000 plus) a terrific salesman listened to the issue with my current oven and recalled his same issue and solution. I thanked him for his time and recommendation. I went home and searched "oven Ignitor" where I was led to this website. The video showed the same exact flat oven igniter and how easy it would be to replace it. I immediately... Read more

$47.95

Compare At:: $57.06
You Save:: $9.11

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Temperature Sensor

4.8 (73)

By: Whirlpool

Part Number: 12001655

The Oven Temperature Sensor is an OEM part for Whirlpool ovens. It measures the oven's internal temperature and sends this information to the control board to maintain the desired cooking temperature.

Causes of a bad temperature sensor can include exposure to high temperatures over long periods, electrical issues such as short circuits, or physical damage due to impact or mishandling.

Symptoms of a bad temperature sensor include:

Inaccurate temperature readings
Oven not heating to the set temperature
Oven overheating
Error codes displayed on the oven control panel

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: For the long 6-inch sensor order 12001656.

This part fixes the following symptoms

Oven is too hot
Little to no heat when baking
Won't start
Oven not heating evenly

Do-It-Yourself Stories from Customers like You Oven did not keep correct or consistently correct temperature Keith J. • Antioch , IL • September 06, 2014

Online videos made this seem an easy fix. I unplugged the oven and removed the rear panel, then found where the temp sensor entered the oven. I unplugged the sensor's electric connector. Unlike the videos, this sensor screwed in from the inside of the oven, so I had to remove the 2 screws inside the oven which hold the sensor in place. Then I pulled the sensor out, careful not to tear the insulation with the wires and connector. Then I just pushed the new connector through the same hole and... Read more

$33.95

Compare At:: $40.40
You Save:: $6.45

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Broil Pan Set

5.0 (17)

By: Whirlpool

Part Number: 4396923

The Broil Pan Set is an OEM part for Whirlpool ovens. This set includes a broil pan and an insert, designed to catch drippings and ensure even heat distribution during broiling, allowing for perfectly cooked and crisp results.

Causes of a bad broil pan set can include prolonged exposure to high temperatures, which may lead to warping or distortion of the pan. Additionally, frequent use without proper cleaning can result in rusting, chipping, or buildup of residues that compromise the pan's functionality and safety.

Symptoms of a bad broil pan set include:

Warping or bending of the pan
Presence of rust or corrosion
Surface chipping or flaking
Difficulty in achieving even cooking results

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You There was no problem Harry M. • Olivebranch , MS • March 10, 2015

I ordered the brioler pan for my new stove from y'all it was a little small but that's the part number in the book that I got with the stoveyall did a great job fast shipping just what I ordered will by from again thanks Read more

$46.95

Compare At:: $55.40
You Save:: $8.45

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Door Seal (Horizontal, Top/Bottom)

4.9 (16)

By: Whirlpool

Part Number: WP7212P006-60

This horizontal oven door seal lines the top and bottom edges of the door opening to keep heat contained inside the cavity. Replacing a worn seal restores stable temperatures, more efficient preheating, and consistent baking results.

Seals the oven opening along the top and bottom edges to reduce heat loss
Helps maintain set temperature and overall cooking performance
Replaces cracked, frayed, flattened, or brittle horizontal gasket
Common signs include visible gaps, heat escaping around the door, longer preheat times, and temperature fluctuations

What's included: One horizontal door seal. Install notes:

Disconnect power and allow the oven to cool completely before servicing
Open the door and carefully pull the old seal straight out of the retainer
Note clip/retainer positions as you remove the old seal and reuse them as designed
Press the new seal evenly into place without stretching; ensure corners are fully seated for a uniform seal

Do-It-Yourself Stories from Customers like You Oven would not heat up past 100 degrees and the light switch was broken Gary B. • Redondo Beach , CA • August 28, 2015

A new ignitor was installed, and a new light switch was installed Read more

$56.95

Compare At:: $67.77
You Save:: $10.82

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw, 1 Piece

4.9 (18)

By: Whirlpool

Part Number: W11233072

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

Fastens panels, brackets, covers, or internal parts to the chassis or frame
Helps maintain alignment and support, reducing rattle, vibration, or looseness
Replaces missing or damaged screws that have backed out, broken, or stripped
Restores secure mounting after service when original hardware is lost

What's included: 1 screw Install notes:

Disconnect power; shut off water or gas supplies before servicing
Use the correct driver; start threads by hand to avoid cross-threading
Match length and thread to the original location; do not substitute with longer hardware
Tighten snugly; do not overtighten into plastic or thin metal

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

$20.95

Compare At:: $24.93
You Save:: $3.98

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

5.0 (3)

By: Whirlpool

Part Number: WP4159193

Size: 10-24X5/16-NI

Do-It-Yourself Stories from Customers like You Hinges were weak Don M. • Colchester , VT • December 31, 2016

Bought and installed new hinges. Repair took about an hour but I also cleaned all the glass inside and out on both oven doors. I had ordered extra screws as I read the old ones that hold the hinges were hard to get in as they were self taping but the screw labeled 5 next to the hinge were not the right ones. All old screws worked fine. You just need to put a little power to them to get them started. Easy repair. Read more

$8.95

Compare At:: $10.56
You Save:: $1.61

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Door Hinge (Oven)

5.0 (3)

By: Whirlpool

Part Number: 74004059

This door hinge restores smooth, controlled opening and a tight seal on the oven door. It supports the door's weight with spring tension so the door closes fully and stays positioned without slamming or sagging.

Provides the spring-loaded pivot that controls oven door movement
Helps ensure the door closes flush for a proper seal and heat retention
Common symptoms: door won't close fully, drops or slams, won't stay at a set angle
Reduces squeaks/binding and corrects uneven gaps around the door

What's included: One door hinge. Install notes:

Disconnect power to the range or wall oven; shut off gas supply if applicable
Remove and support the door to access hinges
Springs are under high tension—use caution and proper locking method; wear gloves and eye protection
After installation, verify door alignment and gasket contact all around

Do-It-Yourself Stories from Customers like You The hinges on an 10 year old maytag wall oven failed to hold the oven door closed Phillip L. • Milpitas , CA • March 01, 2025

I replaced both hinges with the new ones ordered from Appliance Parts. Read more

$100.56

Compare At:: $119.67
You Save:: $19.11

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Oven Door Hinge (Upper)

5.0 (3)

By: Whirlpool

Part Number: 74001856

This upper oven door hinge is a position-specific hinge that supports and controls a side-swing door's movement, helping it open smoothly and seal firmly. Replacing a worn hinge restores proper alignment, closure, and heat retention.

Provides the pivot and spring action at the door's upper mounting point
Maintains door alignment for proper gasket contact and heat seal
Typical symptoms of a failing hinge: door won't close fully, sags, binds/rubs, or pops open
A poor seal from a worn hinge can lead to heat loss and uneven baking

What's included: One upper oven door hinge assembly. Install notes:

Disconnect power and allow the oven to cool completely before service
Support the door; many models require removing the door to access the hinge
Install at the factory mounting points and ensure the hinge fully engages the receiver
After replacement, check door alignment and that the seal contacts evenly

Do-It-Yourself Stories from Customers like You Broken door hinge springs John B. • Kingwood , TX • August 09, 2014

I REPLACED THE HINGE ASSY ONLY BECAUSE I WAS UNABLE TO PURCHASE THE SPRING ONLY. THIS IS 3rd TIME I REPLACED THE HINGES BECAUSE OF A BROKEN SPRING. IT WOULD BE CHEAPER IF ONLY THE SPRING COULD BE BOUGHT. Read more

$88.72

Compare At:: $105.58
You Save:: $16.86

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw (Black)

5.0 (1)

By: Whirlpool

Part Number: WP7101P126-60

This factory fastener secures panels, trim, or brackets on your appliance. Replacing a missing or stripped screw restores a snug, rattle-free fit and keeps components aligned for proper operation and a clean, finished appearance.

Fastens exterior panels, trim pieces, or internal brackets to the appliance chassis
Replaces lost, damaged, or stripped hardware
Helps prevent vibration, rattling, and gaps between parts
Common signs you need this screw: missing hardware, loose or misaligned panel/trim, stripped head or threads

What's included: One screw Install notes:

Disconnect power before servicing; also shut off the gas supply
Use the correct driver; start the screw by hand to avoid cross-threading
Tighten snugly—do not overtighten to prevent stripping or cracking adjacent parts
Repair or replace the mounting point before installing

Do-It-Yourself Stories from Customers like You Oven element was burnedout Robert J. • Hope , ME • February 08, 2015

Turned off breaker,unscrewed (2 screws) element,pulled element out from back of oven,unplugged 2 wires, attached wires to new element, pushed back in, installed retaining screws Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Control Board

5.0 (2)

By: Whirlpool

Part Number: WPW10201912

This genuine replacement part is a control board. The control board is responsible for sending signals to determine the oven's various functions. Attached to the buttons, the control board's circuits allow for the temperature and timer to be adjusted on the oven.To replace the control board, first, make sure that the circuit breaker is off and the oven is unplugged. Pull out the oven to gain access to the back of the range. Locate the upper back panel and remove screws to expose the back of the control board. Pop out the old control board and take note of any wires that are connected. Unplug the wires from the old control board, and resecure them into the new part. Place it back to its original space, and resecure the back panel of the range.This is a genuine replacement part for an control board compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper ovens.

Do-It-Yourself Stories from Customers like You My wall oven would not stop beeping and the control board stopped working. I turned the breaker off and then disconnecting the power from the control panel. Colin R. • Orlando , FL • January 18, 2019

After researching on line what the error code meant I ordered a new electronic control board and oven sensor. It is important to make sure you have all the details of your model number when looking for a part. The oven technician looked at our oven said the replacement parts were no longer being made. I went on line and got the same answer until I saw my model number and a 13 after it. I clicked on the link and the control panel was exactly the same as mine. With a flashlight I was able to look... Read more

$285.76

Compare At:: $307.45
You Save:: $21.69

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Oven Temperature Sensor (Short)

5.0 (2)

By: Whirlpool

Part Number: WP74011433

This oven temperature sensor measures the heat inside the oven and sends that signal to the control so the appliance can reach and maintain the set temperature. Use it to restore accurate baking and consistent heating.

Monitors actual oven cavity temperature and communicates with the control
Helps regulate element/burner cycling for steady, even heat
Failure may present as inaccurate temps, not reaching set temp, overheating, or very long preheat

What's included: 1 short-style oven temperature sensor

Disconnect power at the breaker and allow the oven to cool completely before service
Remove the mounting screw(s) securing the sensor inside the oven; gently pull it forward to access the wire connector
Disconnect the harness, connect the new sensor, route wires carefully, and resecure the sensor
If the connector retracts behind the liner, rear-panel access may be required

Do-It-Yourself Stories from Customers like You Oven would not light. Robert P. • Deer Park , NY • March 10, 2023

Replaced igniter with new one from AppliancePartsPros.com. The repair was easy following the video from their website. A few things were a little different but was able to figure it out. Also was warned that there might be wire nuts instead of a connector. Which there was but just cut and stripped the wire. Oven is like new again. Read more

$109.63

Compare At:: $129.36
You Save:: $19.73

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

4.0 (1)

By: Whirlpool

Part Number: WP98008545

Color: Black. For biscuit order 98008169. For white order WP98008544.

Do-It-Yourself Stories from Customers like You Missing screws and bad sealing door gasket Thomas P. • Palmdale , CA • December 15, 2015

Ordered new screws and door gasket. Replaced the old door gasket now the oven warms up faster and bakes the stuff easier. Replaced the missing door trim screws. Now the door close without making noises. Read more

$7.95

Compare At:: $10.99
You Save:: $3.04

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw (Sheet-Metal Pan Head)

4.5 (2)

By: Whirlpool

Part Number: WP59002061

This sheet-metal pan-head screw secures appliance panels, brackets, and components to the cabinet or frame. Replacing a missing or damaged screw restores a tight fit and helps stop rattles, misalignment, and loosening.

Fastens sheet-metal panels, covers, ducts, and brackets to the appliance chassis
Helps keep components aligned and secure during operation
Replace if the original is missing, rusted, stripped, or damaged
Common symptoms: loose or vibrating panels, gaps or misaligned parts, hardware that won't tighten

What's included: One screw Install notes:

Disconnect power; shut off gas or water supply before servicing
Support the panel or part being attached; hand-start threads to avoid cross-threading
Use the correct driver bit; tighten snugly but do not overtighten into sheet metal
If multiple matching screws secure a part, consider replacing them as a set for consistent hold

Do-It-Yourself Stories from Customers like You Spark electrode wires has aged and broke. Jonathan F. • Bartlett , TN • July 05, 2022

I ordered and replaced the old ignitor and the corroded mounting screws. Read more

$5.95

Compare At:: $7.02
You Save:: $1.07

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Ground Screw

5.0 (5)

By: Whirlpool

Part Number: WP3351614

Size: 10-24 x 3/8 inch.

Do-It-Yourself Stories from Customers like You Timer/control failed Gilbert G. • Lansing , IL • July 09, 2018

Replaced timer control unit, first time doing this. Read more

$7.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Cwg3100aabmm Parts

Appliance Light Bulb

Oven Igniter

Flat Style Oven Igniter Kit

Oven Temperature Sensor

Broil Pan Set

Oven Door Seal (Horizontal, Top/Bottom)

Screw, 1 Piece

Screw

Door Hinge (Oven)

Oven Door Hinge (Upper)

Screw (Black)

Control Board

Oven Temperature Sensor (Short)

Screw

Screw (Sheet-Metal Pan Head)

Ground Screw