Do1289 Parts

This temperature sensor monitors the appliance's internal temperature and relays accurate readings to the control, helping maintain the set temperature. Replacing a failed sensor can resolve temperature-related errors and restore consistent, reliable heating performance.

• Senses cavity temperature and sends a signal to the control to regulate heat output
• Helps maintain target temperature during cooking cycles
• Common failure symptoms: inaccurate temperatures, won't reach or overshoots set temp, intermittent heating, or temperature-related error codes
• Can cause long heat-up times or premature shutdown when failing

• Disconnect power at the breaker/fuse and allow the unit to cool completely
• Access location varies by model; the sensor is typically mounted to the cavity wall or accessible from the rear panel
• Remove mounting screw(s), unplug the connector, and install the new sensor; transfer any bracket/seal if present
• Route leads clear of hot or moving parts and do not overtighten the mounting screw

The 12 Volt Halogen Bulb is an OEM replacement part for Samsung ranges and wall ovens. It is a specialized lighting component designed to illuminate the oven cavity, providing clear visibility and ensuring accurate monitoring of the cooking process.

Causes of a bad halogen bulb can include normal burnout over time, exposure to moisture, or damage due to impact. Electrical surges can also shorten the lifespan of the bulb.

Symptoms of a bad 12 Volt Halogen Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Blackened or broken bulb

This OEM Samsung part ensures compatibility and reliable performance for your appliance.

The Riding Mower Halogen Light Transformer is essential for maintaining the lighting system of your rear-engine riding mower. This genuine OEM part ensures your mower's halogen lights receive consistent and reliable power, providing bright illumination for safer operation during early mornings or late evenings. Designed specifically for compatibility with a variety of rear-engine riding mower models, this transformer guarantees a secure fit and straightforward installation process. Using the Riding Mower Halogen Light Transformer means you can easily replace a faulty or damaged transformer, restoring the full functionality of your mowerGÇÖs lighting system. This not only enhances visibility but also contributes to the overall safety and efficiency of your mowing tasks. By choosing this genuine OEM part, you ensure the highest quality and durability, reflecting SamsungGÇÖs commitment to reliable performance. Keep your riding mower in top condition and enjoy a better mowing experience with this dependable halogen light transformer.

The Halogen Light Assembly is an OEM part for Samsung ovens. It provides illumination within the oven cavity, allowing you to easily monitor the cooking progress of your dishes.

A bad halogen light assembly can be caused by electrical issues, component failure, or damage to the bulb or socket. When the light assembly malfunctions, it can result in a range of problems, such as no light being emitted, flickering light, or the bulb not turning on at all.

Symptoms of a bad halogen light assembly include:

• No light emitted from the oven cavity
• Flickering light or poor illumination
• Bulb not turning on when the oven is in use
• Error codes displayed on the control panel

Replace your faulty halogen light assembly with this genuine OEM part to restore your oven. This Samsung part can also be used on Kenmore/Sears appliances. 
 

This wafer head screw secures panels, brackets, and other components inside your appliance. Replacing worn or missing hardware restores a tight fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable performance.

• Fastens panels, brackets, or trim with a low-profile wafer head for even clamping
• Replaces stripped, corroded, or missing hardware (#8 x 3/8)
• Helps maintain alignment and reduce vibration or rattling noises
• Restores secure mounting for safe, stable operation

• Disconnect power; also shut off gas before servicing
• Support the panel or component while removing/installing hardware
• Hand-start threads to avoid cross-threading; tighten snugly without overtightening
• Replace screws one at a time to maintain alignment

This wafer-head Phillips screw (#8 x 3/8 in) is a factory fastener used to secure panels, brackets, and covers in compatible appliances. Replace a missing or damaged screw to restore a tight, properly aligned fit. What it does:

• Secures sheet-metal or plastic components to the appliance chassis or subassemblies
• Helps maintain proper alignment and reduce vibration or rattling
• Replaces lost, stripped, or corroded screws of the same size and type
• Used at panel, bracket, and cover mounting points designed for this fastener

• One wafer-head Phillips screw (#8 x 3/8 in)

• Disconnect power (and gas, if applicable) before servicing
• Start threads by hand to avoid cross-threading; use a #2 Phillips driver
• Do not overtighten, especially into plastic or thin sheet metal
• Replace only with the same size/type fastener removed to ensure proper fit

This convection oven motor drives the oven's convection fan to circulate hot air for even cooking. Designed as a direct replacement service motor to restore proper airflow and heating performance in compatible Samsung ovens. What it does:

• Spins the convection fan to circulate hot air for more even baking and roasting
• Helps maintain consistent oven temperature by improving air circulation
• Can address symptoms like uneven cooking, hot spots, or a noisy/non-spinning convection fan
• Matches OEM form and mounting for a straightforward replacement when compatible

• One convection oven service motor

• Disconnect power to the appliance before starting any repair
• Handle with care; verify connector and mounting orientation before final assembly
• Wear gloves and eye protection; avoid contact with sharp sheet metal and heating elements

The Electric Wall Oven Rubber Bumper is essential for maintaining the smooth operation of your Samsung electric wall oven. This genuine OEM part ensures a secure and quiet fit between the oven components, reducing vibrations and preventing wear over time. Crafted from durable materials, the rubber bumper effectively absorbs shocks, enhancing the longevity of your appliance. Installing this rubber bumper helps maintain the precise alignment of your oven door, ensuring it closes properly and operates efficiently. Designed specifically for Samsung electric wall ovens, this part guarantees a perfect fit and easy installation. By replacing a worn or damaged bumper with the Electric Wall Oven Rubber Bumper , you can restore your ovenGÇÖs functionality and enjoy a reliable cooking experience. Trust in this genuine OEM part to provide the quality and performance you expect from your Samsung appliance.

The Convection Element 240V for Gas Chainsaw is a reliable replacement part designed to ensure your gas chainsaw operates efficiently. This genuine OEM part delivers consistent performance, maintaining the optimal temperature for your chainsaw during use. Constructed with high-quality materials, the convection element is built to withstand the demands of regular operation, providing durability and longevity. Installing the Convection Element 240V for Gas Chainsaw helps prevent overheating and ensures smooth functionality, enhancing the overall performance of your tool. Compatible with a variety of Samsung gas chainsaw models, this genuine OEM part guarantees a perfect fit and easy installation. Whether you're a professional or a DIY enthusiast, replacing your old or faulty convection element with this genuine OEM part will restore your chainsawGÇÖs reliability and efficiency, allowing you to work with confidence.