Gmr06aazwwc Parts

This replacement door handle restores a secure, comfortable grip on your refrigerator door. Replace a cracked, loose, or missing handle to keep the door easy to open and the appliance looking clean and finished.

• Provides the gripping surface needed to open and close the refrigerator door
• Replaces broken, cracked, or worn handles
• Helps correct a loose or wobbly handle
• Restores appearance when the original is scuffed or missing

• Disconnect power before beginning any repair
• Use the correct driver/Allen key per your model to remove existing handle hardware
• Align the new handle on the door's mounting studs or brackets and secure with existing fasteners
• Tighten hardware evenly and verify smooth door operation

This evaporator door is the movable flap that opens and closes to control airflow from the evaporator section. A working door helps maintain stable temperatures and balanced cooling between compartments for consistent refrigerator performance.

• Regulates airflow from the evaporator through the air duct
• Helps keep fresh food and freezer temperatures within set ranges
• A stuck, broken, or warped door may cause warm spots, overcooling, or frost at air vents
• Can contribute to fluctuating temperatures or clicking from the damper actuator when the door won't move

• Unplug the refrigerator before servicing; wear cut-resistant gloves
• Access the air duct/damper area per your model to reach the door
• Reuse any existing clips, seals, and hardware from the original assembly
• Verify the door moves freely before reassembly; restore power and allow up to 24 hours for temperatures to stabilize

This temperature control thermostat regulates your refrigerator's cooling by sensing cabinet temperature and cycling the compressor. Replacing a failed control restores consistent temperatures and normal on/off operation.

• Monitors cabinet temperature via a capillary sensing bulb
• Opens/closes electrical contacts to start and stop the cooling system
• Common symptoms of failure: too warm or too cold, runs constantly or won't run, no response to temperature dial, intermittent cooling
• Restores predictable cycling and temperature regulation

• Disconnect power before servicing
• Photograph/label wire positions; transfer any brackets/insulators from the original control
• Route the capillary tube exactly as original; avoid kinks and ensure the sensing bulb is secured in its clip/well
• After installation, set to a mid setting and allow up to 24 hours for temperatures to stabilize

This interior oven lamp restores cavity lighting so you can check food without opening the door. It replaces a burned or flickering oven light to improve visibility while cooking. What it does:

• Illuminates the oven cavity so you can monitor cooking progress without opening the door
• Replaces a bulb that is burned out, dim, or flickering
• Helps prevent unnecessary oven door openings that can affect cooking results
• Matches the OEM form and fit for compatible GE ovens

• One oven lamp

• Disconnect power to the appliance before replacing the lamp to avoid electrical shock
• Allow the oven to cool completely before handling the lamp or reaching into the cavity
• Use care when removing/installing the lamp—handle by the base or use a cloth to avoid oils on the glass
• Only use the lamp wattage/type specified by your appliance manufacturer

This control knob replaces a worn, broken or missing range/oven temperature or function knob so you can safely and accurately set burner and oven controls. Designed to restore a secure grip and clear position indication. What it does

• Fits onto the stove or oven control shaft to select burner heat or oven settings.
• Restores a solid grip and clear pointer for accurate temperature and function selection.
• Commonly used when knobs are cracked, stripped, loose, or completely missing.
• Works with standard push-on control shafts; does not include internal switch components.

• Install by aligning the knob on the control shaft and pushing firmly until seated.
• If knob feels loose, inspect the control shaft or replace the keyed adapter if damaged.
• Always turn controls to OFF and disconnect power at the breaker or unplug the appliance before servicing.
• Do not force a stuck knob; check for debris or damage to avoid breaking the new knob.

This door shelf bar is the replacement retaining rail that secures items on a refrigerator door shelf, restoring a solid hold for bottles and containers so they stay in place during normal use. What it does

• Holds and secures items on the refrigerator door shelf to prevent shifting or tipping
• Replaces cracked, broken or missing door rail that lets contents slide or fall
• Restores the door bin's original containment and organization
• Works with the corresponding door bin mounting points to lock the bar in place

• One door shelf bar

• Safety first: unplug the appliance or disconnect power before servicing
• Remove the door bin or empty the shelf area before replacing the bar
• Align the bar with the bin mounting points and press into place until it seats; do not force or bend the part

A replacement screw used to secure appliance panels, trims, or components so parts stay aligned and stable. Installs quickly with a matching driver to restore proper fit and reduce vibration or rattling caused by loose fasteners. What it does:

• Fastens panels, trim pieces, brackets or small components in place
• Restores proper alignment and prevents rattling or vibration
• Replaces missing, stripped, or damaged screws that cause loose parts
• Works where the OEM screw size and thread match the original mounting point

• Screw

• Verify this screw matches the original in length, head style and thread before installing
• Disconnect power and remove any obstructing parts before working on the appliance
• Use the correct driver and turn carefully to avoid stripping the head or threads
• Do not overtighten; snug until secure to avoid damaging parts

This lamp set replaces the refrigerator interior light assembly to restore illumination for easier food visibility and safe access. A direct-fit replacement that reinstates normal lighting when the original lamp is burnt out or damaged. What it does:

• Provides interior lighting so shelves and contents are visible.
• Replaces a broken, burned-out, or flickering lamp to restore consistent light.
• Works with the existing housing and door switch to activate when the door opens.
• Improves safe access and helps prevent missed spills or spoiled food due to poor visibility.

• Disconnect power before servicing to avoid shock—unplug the appliance or shut off the breaker.
• Remove the old lamp cover and assembly, then swap the socket and lamp with the replacement.
• Handle bulbs carefully; use a cloth or gloves to avoid oils on the bulb surface.
• Test the lamp by restoring power and opening the door.