91750 Parts

The Screw is an OEM part for Bosch gas cooktops and ranges. It anchors the surface burner head assembly onto the cooktop surface.

Causes can be stripped threads or overall wear from repeated heating/cooling cycles. Exposure to cooking spills or impacts may also deteriorate the screw head over time.

Symptoms of a bad burner head screw include:

• A burner detaching from the cooktop surface entirely
• Excess movement or instability of burner heads when in use
• Gas leaks reported around the burner head connection points

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This replacement cooking-area knob restores user control to a range or cooktop, providing a secure grip and clear position changes for accurate heat selection. Durable plastic construction matches original fit and feel. What it does:

• Replaces a worn, cracked, or missing cooking-area control knob so temperature settings can be selected reliably
• Engages the stove's control shaft to turn burners or elements on and off
• Helps prevent accidental slips or mis-selections with a firm, indexed grip
• Common symptom fix: knob won't turn, is loose, or stops responding

• One replacement cooking-area control knob

• Turn power/gas to the appliance off and allow surfaces to cool before servicing
• Pull the old knob straight off the control shaft and push the new knob fully onto the shaft until seated
• If knob does not seat, verify shaft type and knob orientation; do not force to avoid damage

This replacement part is a deck belt intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. Deck belts link various rotating shafts to ensure that the entire machine is running smoothly and efficiently. A new deck belt might be needed if the current one is damaged or broken in any way such as being split or torn. The user might be able to tell when the deck belts are malfunctioning if there are noises coming from the machine that are not typical. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is recommended that the user refer to the appliance manual for more detailed instructions on how to install this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by Husqvarna.

This part is a replacement blade cap assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken, lost or defective blade cap assembly in lawn tractors.The blade cap assembly enables the user to easily change the tractor's blades. It is housed in the middle of the blades for quick access. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this blade cap assembly, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This blade cap assembly can be used with lawn tractor models that have been manufactured by Husqvarna and Poulan. Sold individually.

This part is a switch in the control system of a lawn tractor or lawnmower that activates the central electrical systems. Known as a starter switch, it is responsible for turning the power on for the mower. If the engine will not start and the electric starter does not engage, the ignition switch may be defective and needs to be replaced. To check an ignition switch, use an ohmmeter to determine if there is any connection between the S and B terminals. If no connection is detected, the ignition switch is the problem. Replacing an old or malfunctioning ignition switch on a riding mower is quick and easy. First, disconnect the battery and remove the bolt connecting it to the negative cable. Remove the ignition switch and disconnect the wire harness attached to the back. Install the new ignition switch, connect the wire harness, and then reconnect the battery. This part is compatible with specific products from popular brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. It is a genuine OEM part sourced directly from the manufacturer and is sold individually.

The Husqvarna outdoor power equipment shoulder bolt is an OEM replacement part that attaches to the suspension arm and wheel bracket. It is primarily utilized for securing components and providing stability in the equipment's assembly.

This part fixes the following symptoms:

• Loose or wobbly components in the equipment
• Components not staying securely in place during operation
• Excessive vibration or rattling while using the equipment
• Difficulty in attaching or securing parts due to a damaged or worn-out bolt
   

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

This part is a twin-muffler assembly that is used on lawn tractors. A muffler assembly is a component on engines that have two cylinders. The purpose of the muffler is to reduce the noise and the emissions that are produced by the motor. This part also connects to the exhaust pipes.A new twin-muffler assembly may be needed if the original has become clogged and is no longer functioning correctly. Mufflers often need to be replaced within the lifespan of the tractor as they are susceptible to wear and tear. Make sure to allow the machine to cool down thoroughly prior to attempting to perform any repairs or replacements on the machine. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This twin-muffler assembly is a genuine Husqvarna part. It is sold individually. This particular twin-muffler assembly is compatible with lawn tractors that are manufactured by Husqvarna, Poulan, and Jonsered.

This is a replacement clutch. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a malfunctioning or broken clutch on various lawnmower models. The clutch enables the power generated by the engine to be applied gradually and prevents crunching the gears when shifting. Clutches can be damaged and may require replacement. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part. For more accurate information on how and where to install this clutch, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this clutch is suitable for use on several different lawnmower models manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

This steering shaft is a genuine Husqvarna replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. The function of a steering shaft is to connect the steering wheel to the steering gearbox. This allows the wheels of the small engine appliance to turn smoothly.A steering shaft might have to be replaced in the event that it suffers damage over time; this could be a result of regularly steering through uneven and irregular terrain or of turning the steering wheel too far in either direction too often, which can be overwhelming to the gears. Additionally, a steering shaft might have to be replaced if there is material deterioration over time. If this occurs, a replacement steering shaft part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This steering shaft is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

This hub cap is manufactured by Husqvarna and comes in glossy black color. The main function of a hub cap is to provide a protective barrier or cover for the wheel hub and lug nuts against dirt, grime, and other harmful elements. Wheels that do not have hub caps are more susceptible to damage. Corrosion or rust on the lug nuts is common for wheels free of hubcaps. This results in harder lug nut removal. Over time, rust can spread and damage the hub. With hub caps installed, costly repairs and replacements are no longer a concern. Installing a hub cap will take less than five minutes. A rubber ballet can be used to push the hub cap to the wheel hub. To install this genuine front hub cap, simply push it down or use a rubber mallet. When protecting the hub and axle of a lawnmower, this Husqvarna 532104757 Front Axle Hub Cap OEM replacement is an option. It is an OEM front axle hub cap compatible with most Husqvarna Weed Eater, Poulan and Craftsman tractor and mower models. This front axle hub cap is sold individually.