K210a Parts

This black fan switch plate mounts on the control panel and replaces a cracked or missing cover. It secures and aligns the fan control switch so it stays easy to operate and the panel looks clean.

• Covers and supports the fan control switch opening on the control panel
• Keeps the switch properly aligned for reliable actuation
• Restores appearance when the original plate is cracked, warped, or discolored
• Common symptoms include a loose or misaligned switch, broken tabs, or a missing/loose cover

• Disconnect power at the breaker before servicing
• Access the control area and remove any hardware securing the old plate
• Position the new plate and reinstall using existing hardware; ensure correct orientation
• Check smooth switch movement and fan operation before restoring power

This electronic control module replaces a failed range hood/ventilation control board to restore fan and light control. It provides the appliance's user-interface logic so the hood responds correctly to button or switch inputs. What it does:

• Receives input from the hood's pushbuttons or switches and activates fan speeds and lights
• Controls timed functions, speed selection, and light on/off signals
• Can stop erratic fan behavior or unresponsive controls caused by a faulty circuit board
• Helps eliminate intermittent operation, non-working lights, or no-power-to-motor symptoms when board failure is confirmed

• One replacement electronic control board

• Disconnect power to the appliance before starting — risk of electric shock if power is not removed
• Handle the board by the edges and avoid touching components; static discharge can damage electronics

This direct-drive hood blower motor powers the ventilation fan to move cooking fumes and moisture out of the kitchen, restoring proper airflow and reducing smoke and odors. It's a factory-style replacement designed for compatible Broan range hoods. What it does:

• Spins the hood blower to exhaust smoke, steam, and odors from the cooktop area
• Restores weak or intermittent fan operation when the motor fails
• Helps eliminate loud grinding, humming, or no-spin symptoms caused by a bad motor
• Works with the hood's existing blower assembly and fan wheel when compatible

• Disconnect power to the appliance before starting; verify with a multimeter.
• Handle the motor carefully to avoid damaging the shaft or wiring harness.
• Transfer the fan wheel or mounting hardware as needed.

This replacement receptacle is the electrical connector that secures a wiring harness to the appliance, restoring a reliable connection for power or control circuits. It provides a direct, like-for-like fix when the original connector is damaged or fails. What it does

• Connects wiring harness leads to the appliance control or motor/light circuit
• Restores power when a worn or broken connector causes intermittent or no operation
• Prevents loose or arcing connections from causing further electrical issues
• Matches OEM fit and function for a clean, secure connection

• One receptacle

• Always disconnect power to the appliance before inspecting or replacing electrical parts
• Verify terminal orientation and wiring color/location before removal to ensure correct reinstallation
• Use basic hand tools; secure connections firmly but avoid over-tightening that can damage terminals

This transition duct adapter connects the hood exhaust outlet to the home ductwork, providing a secure airway for proper ventilation. It restores correct airflow alignment and helps prevent exhaust leaks. What it does:

• Adapts the hood outlet to the house ducting so exhaust vents properly
• Provides a stable mechanical connection to reduce air leaks and rattling
• Helps eliminate backflow and improves venting performance when fitment is correct
• Commonly replaced when damaged, bent, or corroded

• Disconnect power to the appliance before beginning work and follow all safety precautions.
• Verify duct orientation and size before installation to ensure proper fit.
• Use appropriate fasteners and duct tape or clamps to secure seams and prevent leaks.

This wall cap provides a finished exterior vent termination for dryer, range hood, or bathroom exhaust ducts, protecting the duct opening and helping keep outside elements and pests out while allowing airflow out of the home. What it does:

• Covers and protects the wall duct opening to prevent water, debris, and pests from entering
• Includes a gravity or spring-loaded damper to reduce backdrafts when the fan is off
• Directs exhaust airflow away from the wall for more efficient venting
• Durable exterior-facing construction resists weather exposure and corrosion

• Match the cap to the existing duct size and wall opening before installing
• Fasten securely to the exterior wall with appropriate screws and sealant to prevent leaks
• Turn off and isolate any connected appliance power or gas sources before servicing vents; follow local codes

This rubber grommet cushions and isolates blower or hood components to reduce vibration and noise for smoother operation. It replaces worn or torn mounts that allow metal-to-metal contact and rattling. What it does:

• Cushions motor or housing mounts to absorb vibration and reduce operational noise
• Prevents metal-to-metal contact that can cause wear or rattling
• Restores secure fit where a damaged grommet allowed looseness or movement
• Commonly replaced when torn, cracked, or missing

• One rubber grommet

• Always disconnect power to the appliance before servicing
• Inspect surrounding mounting hardware and replace any damaged fasteners
• Push-fit into mounting hole or seat on shaft per OEM orientation; may require light leverage with a non-marring tool

This receptacle is the electrical connector used on compatible Broan ventilation appliances to restore a secure power connection. Replace a worn or damaged receptacle to help return reliable power to the fan and lights. What it does:

• Provides a secure electrical connection between the appliance wiring and its power/lighting circuits.
• Replaces damaged or corroded connectors that can cause intermittent power or failure to operate.
• Helps eliminate loose or arcing connections that may cause flickering lights or unreliable fan operation.
• Used where the original appliance connector has become brittle, melted, or otherwise compromised.

• Always disconnect household power at the breaker before starting service.
• Confirm the connector matches the appliance wiring and orientation before installing.
• Use proper tools and secure crimps/terminals; avoid exposed conductors.
• After installation, restore power and verify proper operation of fan and lights.

This blower motor replaces the ventilation fan that moves air through a range or wall hood, restoring extraction and reducing odors and smoke. Designed for compatible Broan ventilation units. What it does:

• Spins the fan/blower wheel to exhaust cooking smoke, steam and airborne grease
• Restores airflow when the original motor hums, fails to start, or provides weak suction
• Helps reduce overheating by maintaining proper ventilation
• Matches the OEM mounting and electrical connection on compatible Broan hoods when listed

• Disconnect power to the appliance at the breaker before starting any work.
• Verify the motor shaft rotation and mounting orientation match the existing unit before final assembly.
• Use appropriate fasteners and wiring connectors; follow the appliance wiring diagram.

This deflector directs exhaust airflow and helps protect the hood's internal blower and components from grease and debris. It restores proper venting and helps maintain quieter, more efficient operation when functioning correctly. What it does:

• Guides exhaust air through the hood's vent path to improve airflow direction.
• Shields the blower assembly from grease, lint, and debris that can reduce performance.
• Helps reduce abnormal airflow noise or vibration caused by displaced or missing baffles.
• Can prevent premature buildup that leads to diminished exhaust effectiveness.

• Disconnect power to the appliance before starting work to avoid injury.
• Typically installs with a few screws or clips; verify correct orientation before fastening.
• Inspect surrounding seals and fasteners and replace any damaged hardware for a secure fit.