25975St03 Parts

Replaces a broken, cracked, or worn washer door hinge. This pivoting component attaches the door to the machine body for smooth opening and closing.

The lid hinge bearing is used for the lid hinges on washers and dryers. When functioning properly, it allows the lid to open and close properly. If this is a problem with the bearing, it could make the lid difficult to move. In some cases, when the lid will not close, it means that the machine will not function correctly. Damaged lid hinge bearings should be replaced as soon as possible.The lid hinge bearings see a lot of work since they are in use whenever the lid of the washer or dryer opens and closes. They could become cracked and broken over time. Replacing the bearings is a relatively simple repair that owners can make on their own.This lid hinge bearing is for use with many models of washers and dryers from Whirlpool, KitchenAid, Roper, Estate, Inglis, Maytag, Admiral, Amana, Crosley, and Magic Chef. This is a genuine OEM replacement part that has been sourced from the manufacturer. The piece is sold individually, so if owners need to replace more than one hinge, they will need to buy multiples.

This replacement utility motor restores motorized rotation for compatible appliances, helping components move or drive belts and pulleys so the appliance can operate normally. Designed as a direct-fit service part when original motor fails. What it does:

• Turns drive shafts, pulleys, or blower wheels to enable normal appliance operation
• Replaces worn or failed motor to stop symptoms such as no movement, intermittent operation, or humming without rotation
• Restores proper mechanical drive so related systems (tumble, circulation, or agitation) can function
• Works as a direct swap when the original utility motor is the root cause of drive failures

• One utility motor (single unit)

• Disconnect power before attempting diagnosis or replacement to avoid shock or injury
• Verify electrical connections and mounting match the old motor before installation
• Handle motor carefully to avoid damaging terminals or shaft; follow appliance-specific service manual for alignment and torque specs

Filters debris from fuel before it reaches the engine. Replace annually or when experiencing fuel flow issues. Confirm fit with your model number.

Engine clutch pulley for riding mower tractors. Replace if belt slips, worn grooves appear, or unusual noise occurs. Verify fit with your model number.

Flanged hex nut for lawn tractors and outdoor power equipment. Replace if threads are stripped, nut is missing, or hardware has corroded or loosened.

The Door Hinge is an OEM part for Bosch dryers. This hinge is designed to securely attach the dryer door to the frame, allowing it to open and close smoothly while maintaining a proper seal during operation.

Causes of a bad door hinge can include regular wear and tear, damage from excessive force when opening or closing the door, or corrosion from exposure to moisture and heat.  

Symptoms of a bad door hinge include:

• The dryer door not closing properly or staying open
• Difficulty opening or closing the dryer door
• A misaligned dryer door
• Unusual noises or resistance when moving the door

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Lawn tractor won't start when you turn the key? This starter solenoid links your battery to the starter motor. Common DIY fix for no-crank issues.

Protects wheel hub and lug nuts from dirt and grime on riding mowers and tractors. Simple snap-on installation takes minutes with basic tools.

Chute deflector shield for riding mowers and lawn tractors. Protects from trees and obstacles while directing grass clippings. Replace if cracked or broken.

This is a genuine OEM replacement drive V-belt for a riding lawn mower. The drive V-belt attaches to the drive pulley and transfers rotational motion from the transmission to the mower blade. This causes the blade to then spin and cut grass. By using a belt to transfer motion, the engine does not have to work as hard to spin multiple parts, meaning that it runs more efficiently. Drive V-belts are made of a rubber composite material that will begin to fray and stretch over time. Due to continuous motion, these belts absorb a lot of wear and tear, and if left for too long, they can eventually snap and leave the mower blade non-functional. Therefore, it is wise to check the condition of a V-belt during regular maintenance. As soon as it appears to be wearing away, replace it with a new part using a nut driver and screwdriver. When detaching the lower deck, be sure not to lose the bolt clips, as they are required for reassembly. As a high-quality replacement part, this drive V-belt is directly sourced from its original manufacturer. It is compatible with riding lawn mowers made by Husqvarna, Poulan, Craftsman, and Jonsered. This part ships individually.

This rubber bumper cushions and stabilizes appliance panels and doors to reduce noise, vibration, and wear. It helps prevent metal-on-metal contact and keeps moving parts from rattling for quieter, smoother operation. What it does:

• Absorbs shock and dampens vibration between parts
• Prevents panels, doors, or racks from banging or rubbing
• Protects finishes by creating a soft contact point
• Helps maintain proper alignment of movable components

• Disconnect power or gas supply to the appliance before servicing
• Remove the old bumper and clean the mounting surface before installing
• These bumpers are typically installed by pressing into a hole or seating against a surface; follow the OEM instructions for your model
• If adhesive is required, use only the manufacturer-recommended adhesive and allow proper cure time

Replace a broken starter pulley that prevents your engine from starting. This pulley connects starter components to allow proper engine cranking operation.

Engine won't start or runs rough? This armature-magneto ignition coil produces the high voltage needed to fire spark plugs and start your small engine reliably.

Starter rope won't engage or turn the crankshaft? A worn or corroded starter clutch prevents engine cranking. Direct replacement restores starting function.