Mcm770b1 Parts

This Bake Element is an OEM part for Bosch Ovens. It's responsible for providing heat in the oven cavity for baking and cooking purposes. With prolonged use, the bake element can wear out or malfunction.

Frequent use at high temperatures can cause the bake element to deteriorate over time. Physical damage or overheating may also contribute to its failure.

Symptoms of a Bad Bake Element:

• Uneven cooking or baking
• Inconsistent oven temperatures
• Oven takes longer to preheat

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This door switch detects when the door is fully closed and latched. Replacing a worn or stuck switch restores safe, consistent start/stop behavior and ensures the unit only runs with the door securely shut. What it does:

• Senses door position and signals the control to enable/disable operation
• Prevents the appliance from running with the door open
• Resolves issues such as: won't start despite power, stops when the door is jostled, "close door" message, or needing to press on the door to run
• Helps restore reliable cycle start and proper safety interlock function

• 1 door switch

• Disconnect power at the breaker before servicing
• Access the switch behind the door panel or latch area; note wire locations or take a photo
• Move wire connectors to the new switch one at a time; ensure terminals are fully seated
• Reassemble and test door closure and operation before returning to service

This switch assembly replaces a faulty E34 - 19HV switch to restore proper electrical control in the appliance. It provides the same fit and function as the original to help re-enable the affected control circuit safely. What it does:

• Acts as the electrical switch that completes or breaks a circuit when engaged
• Restores normal operation when a failed switch causes intermittent or no response
• Commonly associated with control failures, unresponsive buttons, or power-related symptoms
• Matches OEM form and mounting to fit into the original switch location

• Always disconnect power to the appliance before servicing
• Handle wiring and connectors carefully; note wire locations or take a photo before removal

This mounting bracket secures a dishwasher component to the cabinet or chassis, restoring proper panel alignment and reducing movement. It's a simple replacement for a bent, broken, or missing bracket to improve fit and quiet operation. What it does:

• Provides a secure mounting point for door/panel or internal components
• Keeps panels and trim aligned to prevent gaps and rubbing
• Reduces rattling or movement caused by a loose or damaged bracket
• Restores stable attachment after impact or corrosion-related failure

• Disconnect power and turn off the water supply before starting work
• Basic hand tools (screwdriver, nut driver) are typically required
• Support the panel or component while removing and installing the bracket to prevent dropping
• If fasteners are corroded or damaged, replace them with like-for-like hardware

This wire oven rack slides into the oven's side supports to hold cookware at the correct height. Replace a bent, rusted, or missing rack to restore safe, level support and smooth sliding for baking, roasting, and broiling. What it does:

• Provides a stable, level surface for pans and dishes on the oven's side rails
• Lets you position food at multiple heights for proper cooking and airflow
• Slides in and out for easy loading and unloading when properly seated
• Common replacement reasons: bent/warped wires, flaking finish or rust, rough sliding, or poor fit

• 1 oven rack

• Allow the oven to cool completely; wear gloves to avoid sharp edges
• Pull the old rack straight out; clear debris from the side rails
• Align the new rack with the side supports and slide it in; ensure stops face the back if present
• Ensure the rack is evenly seated on both rails before placing cookware

This replacement capacitor with internal resistor helps stabilize control circuits and assist motor start in compatible appliances, restoring reliable electrical performance and preventing intermittent operation. What it does

• Provides the capacitance needed for motor start/run and helps suppress electrical noise in control circuits.
• Supports steady voltage during startup to reduce motor humming or failure to start.
• Can resolve intermittent operation, erratic control behavior, or startup delays when failing.
• Contains an internal bleed/resistor to safely discharge stored energy and reduce residual charge risk.

• Disconnect power at the breaker and unplug the appliance before accessing electrical components.
• Capacitors can hold a charge — discharge safely and use insulated tools.
• Handle carefully to avoid damage from bending leads or crushing the housing.

This is a replacement mounting screw used to secure components and panels in compatible Bosch appliances. It provides a simple way to restore proper fit and prevent loose parts or rattling. What it does:

• Fastens panels, brackets, or small components to appliance frames
• Restores secure mounting when original screw is missing or damaged
• Helps stop vibration-related noise from loose parts
• Matches OEM fit and thread for reliable fastening when the correct screw is specified

• Use the matching screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread damage or cracking nearby plastic
• Turn off and unplug the appliance or disconnect power before accessing internal components

This latch assembly secures the dishwasher door during operation so the cycle can start and run safely. It replaces a worn or broken door latch to restore proper door closure and reliable cycle starts. What it does

• Secures the door closed so electronic controls detect a closed door and the wash cycle can begin.
• Prevents the door from popping open during a cycle, reducing leaks and interruptions.
• Commonly used when the door won't latch, the appliance won't start, or the door latch feels loose or broken.

• Disconnect power to the appliance before starting any repair to avoid electrical shock.
• Access may require removing the inner door panel and exterior trim; keep fasteners organized.
• Inspect door strike and surrounding trim for damage; replace any broken parts to ensure proper fit.
• After install, test door closure and run a short cycle to confirm proper operation and no leaks.