Magic Chef Door Opened Long Parts

The Oven Inner Door Glass is an OEM part for Whirlpool ovens. The glass component is specially tempered to withstand high heat inside the oven cavity.

Size: 20 5/8 inches x 13 1/8 inches. For the glass measuring 22 3/8 inches x 14 inches order 74004857

Causes of a bad oven inner door glass can include small cracks or chips developing from regular door openings/closings, or microscopic defects that enlarge under repeated thermal cycling. Damage from accidental impacts is also possible.

Symptoms of a bad Oven Inner Door Glass include:

• Reduced visibility into the oven due to fogging, steam, or condensation buildup
• Cracks or fractures compromising the structural integrity of the glass
• Leaks or seal failure allowing heat to escape from around the door frame

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement panel restores your appliance's original look while shielding internal components. Install a new panel to replace a dented, cracked, or missing piece and keep the assembly secure, aligned, and protected.

• Covers and protects internal parts while restoring the exterior finish and fit
• Provides the designed mounting surface for trim/handles; helps maintain alignment
• Replace when the panel is dented, cracked, warped, rusted, or mounting tabs are broken
• Helps resolve loose or rattling panels and visible gaps or misalignment

• Disconnect power; turn off water or gas supply if applicable
• Wear gloves and protect finished surfaces; handle carefully to avoid bending or scratching
• Transfer and reuse original screws, clips, insulation, and trim as directed by your service manual
• Fit and alignment before fully tightening fasteners

The Dairy Door is an OEM part for Whirlpool refrigerators. It serves as a cover for the dairy compartment, helping to keep dairy products like butter and cheese fresh by providing a separate, enclosed space within the refrigerator.

Causes of a bad dairy door can include wear and tear from regular use, accidental impacts causing cracks or breaks, or the hinge mechanism wearing out over time.  

Symptoms of a bad dairy door include:

• The door not closing properly or staying closed
• Cracks or visible damage on the door
• The hinge mechanism feeling loose or broken
• Dairy products not staying as fresh due to lack of proper enclosure

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This is the lower access panel for the appliance's base. It finishes the front opening and shields internal components, helping reduce noise and keep dust and debris away from the motor and wiring.

• Covers the lower service opening beneath the door to provide a clean, finished look
• Helps protect internal components from debris and accidental contact
• Can reduce vibration noise when properly secured
• Replace if the panel is bent, cracked, rusted, missing, or rattles/doesn't stay secured

• Disconnect power; also shut off the water supply
• Support the existing panel while removing mounting screws; retain hardware for reuse
• Position the new panel, align with mounting holes/slots, and reinstall screws—do not overtighten
• Confirm door clearance and that the panel sits flush without interference

Seal tape restores a tight seal around appliance doors and panels to help prevent air or moisture leaks and improve temperature stability. Use it to replace worn or missing sealing strips that allow drafts, frost, or heat loss. What it does

• Creates a flexible barrier to close small gaps and reduce airflow or moisture migration at door and panel seams.
• Helps maintain correct internal temperatures and can reduce frost buildup or inefficient cooling/heating.
• Replace when tape is cracked, compressed, detached, or visibly deteriorated.
• Commonly used where a thin, form-fitting sealing strip is needed on appliance doors and access panels.

• One seal tape.

• Clean and dry the mating surface before installing for best adhesion; remove old residue.
• Cut to fit and press firmly along the length to seat the tape; trim excess as needed.
• Disconnect power (unplug or switch off breaker) before starting.

This inner oven door glass replaces a cracked or cloudy panel to restore a clear view into the oven and help maintain proper door sealing. Fits models that use the WP7902P444-60 / 208970 assembly. What it does:

• Replaces damaged, cracked, or fogged inner oven door glass to improve visibility and appearance.
• Helps maintain the oven door's barrier between the cooking cavity and room air.
• Can reduce heat loss from a compromised door glass when properly installed.
• Safe, durable glass designed for oven-door use per OEM specification.

• One inner oven door glass panel

• Disconnect power to the appliance before starting any repair.
• Remove the oven door per the manufacturer's instructions to access the inner glass; follow OEM guidance for disassembly/reassembly.
• Handle glass with care and wear cut-resistant gloves and eye protection.
• If screws, clips or gaskets appear damaged during disassembly, replace them with matching OEM parts.

This is a complete freezer door assembly that replaces a dented, cracked or damaged outer freezer door to restore the cabinet seal, appearance and proper door operation. Fits factory hinge locations and restores a flush, insulated door surface. What it does

• Replaces a damaged or bent freezer outer door so the door closes and seals properly.
• Restores the exterior appearance and protects the freezer liner and contents.
• Helps maintain proper cold temperature by allowing the gasket to seat correctly.
• Useful when door damage causes drafts, visible dents or misalignment.

• Before starting, remove food and shelves from the door and unplug the appliance or disconnect power.
• Door assemblies are heavy and awkward—use two people to avoid injury or damage.
• Keep all mounting hardware and hinge parts removed during disassembly; re-use factory fasteners unless replacements are provided.
• After installation, check door alignment and gasket seal; adjust hinge tension per the refrigerator's service instructions if needed.