Pfss6pkw Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments. 

All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster. 

Symptoms of a burnt out refrigerator light bulb include:

• Dim or no light illuminating inside refrigerator shelves  
• Shadows and dark spots making it difficult to find items
• Higher utility costs from leaving the door open to see inside

This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models. 

The Asm Gasket Door Fre is an OEM part for GE refrigerators. This assembly gasket is designed to create an airtight seal around the refrigerator door, preventing warm air from entering and helping to maintain the internal temperature, which is crucial for keeping food fresh.

Causes of a bad door gasket can include regular wear and tear from frequent door openings and closings, damage from cleaning, and exposure to temperature fluctuations. Over time, the gasket may become brittle, crack, or develop mold, compromising its ability to seal properly.

Symptoms of a bad door gasket include:

• Warm air entering the refrigerator, causing increased internal temperatures
• The refrigerator running more frequently or for longer periods
• Visible cracks, tears, or mold on the gasket
• Difficulty in closing the refrigerator door securely

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Bucket Assembly is an OEM part for GE refrigerators. It collects and stores ice produced by the ice maker, ensuring a steady supply of ice is readily available for use. This assembly includes the bucket itself, along with any necessary components to fit securely within the freezer.

The ice bucket assembly may need to be replaced if it becomes cracked, damaged, or no longer fits properly. Causes of a bad ice bucket assembly can include general wear and tear, dropping or mishandling the bucket, or exposure to harsh temperatures causing the plastic to degrade.

Symptoms of a bad ice bucket assembly include:

• Cracks or visible damage to the bucket
• Ice not being properly stored or dispensed
• The bucket not fitting securely in its designated place
• Leaks or ice buildup around the bucket area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Icemaker is an OEM part for GE refrigerators. This part automatically produces ice within the freezer compartment, ensuring a consistent and convenient supply of ice cubes for your household needs. 

Over time, the icemaker may require replacement due to common issues like wear and tear, malfunctioning components, or a failure to produce ice properly.  

Symptoms of a bad Icemaker include:

• Failure to produce ice or producing very little ice
• Ice cubes are smaller than normal or not uniform in shape
• Water leaking inside the freezer compartment
• Strange noises coming from the icemaker unit

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The ASM Cover Veg Pan is an OEM part for GE refrigerators. It serves as a cover for the vegetable crisper drawer, helping to maintain the freshness of stored produce by providing a controlled environment. This cover supports the shelf above the crisper and can also act as an additional storage surface.

Causes of a bad ASM cover veg pan can include cracks or breaks from heavy use, warping due to temperature fluctuations, or general wear and tear over time. These issues can compromise the cover's ability to properly seal the vegetable drawer and support the shelf.

Symptoms of a bad ASM cover veg pan include:

• Cracks or visible damage to the cover
• Difficulty in fitting the cover securely over the crisper drawer
• Reduced effectiveness in keeping vegetables fresh

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Asm Flip Pantry Cover is an OEM part for GE refrigerators. This cover is designed to fit over the pantry drawer or deli drawer, providing a clear view of the contents while protecting them from exposure to the refrigerator's main compartment. It helps in maintaining an optimal temperature for deli items, fruits, and vegetables, keeping them fresh for a longer period.

Causes of a bad pantry cover can include cracking or breaking due to heavy use, accidental impacts, or temperature fluctuations. 

Symptoms of a bad pantry cover include:

• Cracks or breaks in the cover
• The cover not fitting properly over the pantry drawer
• Difficulty in opening or closing the drawer due to misalignment
• Visible wear and tear that affects functionality

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This refrigerator water inlet valve controls the incoming household water supply to the dispenser and icemaker. When energized, it opens to allow water flow, helping restore reliable dispensing and proper ice production.

• Regulates water flow to both the dispenser and the icemaker
• Common failure signs: no or slow water dispensing, no ice production, small/hollow ice cubes, valve humming but no water, or water leaking from the valve body
• Electrical solenoid-operated design opens only when signaled by the control system
• Helps maintain consistent water delivery and ice fill levels

• Disconnect power and turn off the household water supply before servicing
• Place a towel or pan to catch residual water; relieve line pressure carefully
• Transfer tubing and wire connectors one at a time to the new valve to avoid mix-ups
• Check for leaks after installation; do not overtighten compression fittings

This temperature sensor monitors internal refrigerator temperatures and relays them to the control, helping the unit maintain consistent cooling. Replacing a failed sensor restores accurate temperature regulation and more reliable operation. What it does:

• Measures compartment or evaporator temperature and sends a resistance signal to the control board
• Helps the control modulate compressor and fan run times for proper cooling
• Typical failure signs: sections too warm or too cold, erratic temperatures, or running longer than normal
• Causes inaccurate temperature readings compared to setpoints

• 1 temperature sensor assembly

• Disconnect power before servicing
• Access the sensor in the affected section; release any cover/clip and unplug the connector
• Route the new sensor's wiring like the original and ensure it's fully seated in its holder or clip
• Restore power and allow up to 24 hours for temperatures to stabilize

This is the flip-out center rail for French-door refrigerators. It closes the gap between the fresh food doors to maintain a tight seal, helping keep cold air in and moisture out for consistent cooling. What it does

• Flips into place when both doors close to complete the perimeter seal
• Helps prevent warm-air leaks and condensation between the doors
• Supports proper temperature by reducing air infiltration
• Common symptoms: loose or broken flipper, doors not staying closed, moisture or frost at the center seam

• Includes 1 door mullion (flipper) assembly

• Disconnect power before servicing and clear items from door bins
• Open the doors and carefully release any retaining screws/clips; design varies by model
• Note spring orientation/hinge engagement and transfer any trim as needed
• Ensure the flipper moves freely and snaps closed before restoring power

This is the door gasket for the refrigerator (fresh food) compartment. It creates an airtight seal around the door to keep cold air in, reduce moisture, and help maintain proper temperatures.

• Seals the fresh food door perimeter to prevent air leaks
• Helps reduce condensation, frost, and temperature swings
• May help if the door won't seal, the gasket is torn, or food is warming
• A worn or deformed gasket can increase run time and energy use

• Unplug the appliance before service
• Warm the new gasket (hair dryer on low or warm water) to relax folds
• Transfer any retainers if applicable; seat the gasket fully into the channel
• Check door alignment and adjust hinges if needed for proper seal

This drain line assembly routes condensation/defrost water from the refrigerator cabinet to the rear drain pan. Replacing a cracked, warped, or clogged line restores proper drainage and helps prevent interior leaks and ice buildup.

• Directs meltwater from the evaporator drain to the condenser/drain pan
• A restricted or damaged line can lead to water under crispers or on the floor
• Ice sheet forming at the bottom of the freezer is a common sign of a blocked drain
• Restores correct moisture management and helps reduce odors from standing water

• Unplug the refrigerator and turn off the water supply if applicable
• Pull the unit forward and remove the lower rear access cover to reach the drain outlet and pan
• Place a towel, disconnect the old line, clear any ice/debris in the drain channel, and seat the new line fully
• Route the tube into the pan without kinks, reassemble, and verify flow by pouring warm water through the interior drain

This refrigerator main control board is the central electronic module that coordinates cooling, fan operation, and defrost cycles. Replacing a failed board helps restore stable temperatures and reliable overall performance. What it does:

• Controls compressor operation and cooling cycles
• Drives evaporator and condenser fan motors
• Manages automatic defrost heater timing
• Interprets temperature sensor inputs to maintain setpoints
• Resolve: refrigerator/freezer not cooling, fans or compressor not running, frost buildup, or clicking/chattering from the control area

• Disconnect power before servicing; use proper ESD precautions and handle the board by its edges
• Photograph wiring and label connectors to ensure accurate transfer to the new board
• Transfer any jumpers or mounting hardware from the original board as required
• After installation, restore power and allow time for temperatures to stabilize

This damper motor assembly controls the refrigerator air damper to help regulate airflow between compartments, restoring proper temperature balance and reducing uneven cooling when the original motor fails. What it does:

• Moves the air damper to open or close airflow between freezer and fresh-food sections
• Allows the fridge control to direct colder or warmer air as needed for temperature regulation
• A faulty unit can cause symptoms like warm or inconsistent fresh-food temperatures, reduced cooling performance, or unusual clicking/noise at the damper area

• Disconnect power before starting; work on powered appliances can cause shock or injury
• Access typically requires removing interior panels or shelving to reach the damper housing
• Align the motor drive and damper linkage; don't force gears or clips when installing
• After installation, restore power and verify damper movement and temperature control operation

This evaporator cover assembly protects the refrigerator evaporator coil and helps direct cold airflow for reliable cooling. Replacing a damaged or missing cover restores proper air circulation and reduces frost or water issues. What it does:

• Shields the evaporator coil from debris and accidental contact
• Helps channel cold air through the freezer/refrigerator compartments
• Reduces uneven cooling and localized frost buildup when installed correctly
• Prevents direct dripping onto components that can cause water pooling

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Remove interior panels, shelves or the evaporator access cover as required to reach the coil.
• Handle carefully around sharp sheet-metal edges and the evaporator fins to avoid damage or injury.
• Do not attempt any sealed-system repairs.

This is a self-tapping screw used to secure appliance panels and small components. It provides a reliable hold in sheet metal and plastic mounting points to restore proper fit and prevent rattling or loose parts. What it does:

• Fastens trim, brackets, and light-duty panels where a tapped hole is needed
• Creates its own threads in thin metal or plastic mounting points
• Helps stop vibration-related noise by securing loose panels
• Commonly used during repairs of control panels, inner liners, and external trim

• One tapping screw as shown

• Use the correctly sized screwdriver or bit to avoid stripping the head
• Drive straight and stop when snug; over-tightening can strip the mating material
• Turn power off and unplug the appliance before accessing internal panels
• If the original hole is damaged or oversized, consider using a slightly larger fastener or repair insert per manufacturer guidance