Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
If your microwave turntable won't spin, makes grinding noises, or jerks while running, this motor is likely the fix. Simple 10-minute DIY replacement.
It was a really simple fix, and I kick myself for waiting so long to attempt the repair. Following the YouTube video, I had the old motor out and the new one in in approximately 10 minutes. I even felt the satisfaction of having completed a repair project. Read more
Replace your cracked, broken, or shattered microwave glass turntable tray. This heat-resistant rotating plate sits on the turntable support ring.
Mom had slippery fingers and broke the microwave plate, luckily AppliancePartsPros.com had the exact same plate to replace it. They made it easy to find, order, and ship. Thanks for keeping life going without missing a step! Read more
Microwave has no power or won't heat? A blown thermal fuse is often the cause. This safety part protects against overheating. DIY repair in 30 minutes.
It is difficult (if not impossible) to remove the electronic switches from the hard plastic latches. I replaced all three switches and both the upper and lower latches I also replaced the main 20 amp ceramic fuse which blew out when the latch/switches failed. Read more
Air damper assembly for over-the-range microwaves. Installs at top exhaust opening to control airflow direction. Replace if cracked, missing, or broken.
Bought a new home with microwave venting into kitchen. Ordered damper assembly needed to vent through the wall to the outside. Removed microwave, followed directions in original installation instructions, turned fan over, cut hole in wall, installed wall cap and replaced oven. Problem solved. Read more
Microwave won't heat but hums loudly? The diode regulates power to the magnetron. Test with multimeter—reads one direction only. Moderate DIY repair.
Replacing a magnetron in my particular 9-year-old microwave (a microwave/hood combination) was not a simple “plug & play” operation. That is why I am placing this in the slightly difficult area. First, it takes 2 people to remove the microwave from the top of the stove. Next the main outer panel need to be removed. After that, 2 sheet metal panels need to be removed in order to expose the high voltage components for testing. Always discharge the high voltage capacitor first before doing... Read more
Includes brackets, screws, and fasteners for secure microwave installation. Replace missing, lost, or incomplete hardware from floor models or clearance units.
With help from family we were able to install my microwave in just a short time. Read more
Fix a microwave door that won't open or close properly with this interlock assembly. Includes door switches. Moderate DIY repair with panel removal.
Ordered Genuine Whirlpool parts from Appliance Parts Pros and had them in 3 days. Replaced fan motor and squirrel cage assembly. Having never taken a microwave apart it took longer to disassemble than replace the part. Whirlpool did change a couple micro switches on door interlock so you have to switch them out from the old interlock or put new wire terminals on wires to use new ones. Read more
Fix a microwave turntable that won't rotate or makes grinding noises. This support ring holds the glass tray and allows smooth rotation for even heating.
I ordered a new roller for my microwave Read more
Captures grease, smoke, and odors from your cooktop. Replace when clogged or damaged to maintain ventilation efficiency. Verify fit with your model.
Absorbs cooking odors and fumes in your microwave. Replace every 6 months or when odors persist. Verify compatibility with your model number.
Microwave not heating or making loud humming noise? The high-voltage capacitor supplies power to the magnetron. DIY repair in under an hour.
I ordered a new magnetron and a new capacitor and after they arrived I set to work. I took plenty of pictures with my phone to remind me how the components came apart but it was pretty straight forward. Once the new parts were in and everything was reassembled the microwave worked good as new. The repair was less than a third the cost of replacement and no special tools are required. Just be careful to discharge the capacitor. This website is a great resource. Read more
Color: Grey
The grill vent is only held in place by two screws. Super simple fix. Remove the two screws and the old grill vent, position the new vent and put the two screws back in. Replacing the cord required that cabinet to be removed. Lots of screws on the back, top and bottom. Once the screws were removed, the cabinet pulled back. The power cord connections were then clearly visible. Undid the two wire connectors and unscrewed the ground wire from the body to remove the old power cable. Installed the... Read more
Secures your microwave to its mounting bracket for stable wall installation. Replace if nut is stripped, missing, or won't hold microwave firmly in place.
Small mounting spacer that keeps microwave components aligned and prevents abrasion. Replace if cracked, missing, or worn to restore proper clearance.
Fix error codes like F1E4 or a microwave that won't start with this control board. Houses circuitry for power levels, timers, and sensor functions.
Microwave not heating or making loud humming noise? The magnetron generates microwave energy for cooking. Moderately difficult repair in tight spaces.
I tested the diode and the magnetron, and found the magnetron was grounded and the diode was open. Replacing the magnetron was the hardest part, because in the low profile microwave there's not a lot of room. I had to slide the transformer out to make room to get the magnetron out! Read more