Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Dryer cylinder belt transmits motor power to spin the drum. Replace if belt is worn, frayed, or broken causing drum not to turn. Verify fit with model number.
Third try was a charm!!!! Read more
Drum roller kit for Speed Queen dryers (1992-newer). Includes rollers and axles that support smooth drum rotation. Replace when worn or broken.
Replaced defective roller wheel with replacement kit Read more
The Knob Assembly is an OEM component specifically designed for Speed Queen dryers. This assembly includes the control knob and integrated electronic components that allow for cycle and setting selection.
Causes of a defective knob assembly include normal wear of constantly rotated buttons, sun damage to exposed plastic knobs, and general use degradation of sealed electronic sensors over time.
Symptoms of a bad knob assembly include:
This OEM Speed Queen part is also compatible with products from American Dryer Corporation. Replacing the entire knob assembly restores full functionality to reliably control cycles on your dryer. Proper maintenance ensures long-term durability.
New timer Read more
The Spring Idler is an OEM replacement part for Speed Queen residential clothes dryers. It works with the dryer drum to facilitate the controlled tumbling of laundry items during the drying cycle. Proper functioning is important for efficiency and effectiveness. Causes of a bad spring idler can include material fatigue from years of repetitive use. It can also result from overloading the dryer with excessively heavy wet loads that put abnormal stress on the idler mechanism. Symptoms of a failed spring idler include:
As the mechanism responsible for facilitating optimal tumbling, this OEM Speed Queen replacement idler spring restores smooth and efficient dryer operation.
For about the last month or so the clothes (especially sheets) would just roll into a ball (like a big sausage) the wouldn't dry. Kept readjusting the clothes. I went on the internet to see what the issue could be and found lots of advise about shaking out the sheet and clothes first, using tennis balls, and using fuller or smaller loads. None of that worked. But I finally figured out that the reason they roll into a ball is because the belt around the drum is slipping or stretched. This... Read more
Perforated outlet cover for Speed Queen dryers. Protects the exhaust system while allowing airflow. Replace if cracked, melted, or damaged.
After attempting to clean the cover, I looked online to see how much it would cost to simply replace it, and found it at a good price, with timely, reasonable shipping, at AppliancePartsPros.com. I bought two in case I make the same mistake in the future! Parts shipped out the same day and arrived in two days. Very pleased! Read more
Maintains tension on the drive belt. Replace if the wheel is cracked, bearing is worn, or assembly is broken to restore smooth, quiet drum rotation.
Changed the drum rollers, belt, and idler pulley wheel. Was not sure which one was making the noise but all three were well used and many years old. One of the drum wheels was the culprit. very easy and straightforward repair with no assistance. Read more
Drum glide kit reduces friction for smooth, quiet dryer operation. Replace if drum doesn't turn freely or makes grinding/squealing noises. Confirm fit.
Idler lever assembly with bearing and wheel for dryers. Maintains belt tension for smooth drum rotation. Replace if cracked, worn, or causing squeaking.
Replace idler wheel assembly, belt and spring. Read more
Dryer won't start or stops mid-cycle? A worn door catch prevents secure latching. This assembly holds the door shut so your dryer runs. DIY-friendly repair.
I called a local appliance store that gave us a replacement. That one broke after 1 week! The door was off balance. Tightened screws to realign. I found your store online and ordered the part. Arrived in 1 day! The part is much stronger than the first one. So far so good! Read more
This is an igniter and bracket assembly, and it is intended for use in dryers. This is a genuine replacement part made by Speed Queen. The igniter is connected to the dryer on the back of the appliance, and it is used to heat the drying tub. A new igniter and bracket assembly might be needed if the dryer is unable to reach the correct temperature. If the heat in the dryer seems inconsistent during any drying cycle the igniter might be bad and will need to be replaced. For this repair the user will need access to the back of the appliance. Be sure the dryer is completely powered down and cooled before attempting to repair. This is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with Dryers made by Speed Queen.
Had handyman fix machine Read more
This drum support roller installs inside your dryer to support and guide the drum as it rotates. Replace if cracked, worn, or causing noise during operation.
Fix unresponsive or sticking control buttons with this panel-mounted push button switch. Restores reliable function activation. Straightforward repair.
Flat stationary rack that installs inside the dryer drum for air-drying shoes, hats, and delicate garments without tumbling. Replace if cracked or broken.
We purchased a Drying Rack. Read more
Dryer lint filter traps fibers to maintain airflow and drying efficiency. Replace if torn, damaged, or missing to prevent lint buildup. Confirm fit.
Replaced lint screen Read more
Dryer not heating or overheating? A failed limit thermostat stops heat when temps climb too high. Simple DIY fix restores safe, reliable drying.
Captures lint and fibers during drying to maintain airflow and prevent buildup. Replace when damaged, torn, or clogged. Confirm fit with your model.
Replaced it Read more