Frigidaire 318394803 Switch OEM Part

When trouble shooting the problem I found that the light switch housing outer lip was broken allowing the switch to push through mounting surface behind the oven door. This is a slide in range so, I proceeded to pull the range away from the counter where I could unplug the power cord. Once the power was off like located the panel on the right upper side of the unit and removed the screws to allow access to the switch. I then unplugged the switch from the wiring harness and removed the damaged part. Located part number on switch, logged onto Appliance Pros.com and easily located the replacement unit by following the online instructions. Ordered part which arrived very timely and affordable. Replaced new switch by reversing the steps from taking out and finished the task easily. Than you Appliance Pros. Ease of locating, verifying, ordering and saving money for costly repairs. 5 stars to you! Robert S. Illinois

This is the second time this switch fried due to water boiling over on the range 1)shut the power off 2) open oven door 3) pop switch out with screw driver 4) unplug switch. and then your on your way plug new switch in turn power on and check switch, when switch works turn power off insert switch in oven wall turn power back on. p,s, when the switch shorted out the oven light stayed on so i unplugged switch then waited for the new switch that came in 3 days good luck.

Ordered and replaced new switch

The housing that secures the switch broke so the switch fell into the oven housing. The toughest part was fishing it out. Make sure to turn breaker off, simply unplug the old switch and plug the new one in and it pops right into place. May have to use flat blade screwdriver to pry old switch off connector.

Changed the probe and door switch. Also pulled double oven out, replaced the convection motor. The unit was 30 years old. only pain was pulling out oven to get to back. watched video first, AppliancePartsPros were a great help.