Er36dsch/Ng Parts

Replace your oven halogen bulb when the cavity light dims or fails. This 12-volt bulb restores visibility for monitoring cooking. Verify fit by model.

Restores bright indicator lighting for cooking zones on cooktops and ranges. Replace when zone indicator fails to illuminate. Verify fit with your model.

Fix weak or failed ignition caused by gas leaks around the igniter assembly. This small rubber seal prevents air and gas leaks for reliable starts.

Oven won't heat or takes too long to preheat? This bake igniter assembly lights the gas burner to restore reliable baking and roasting performance.

This transformer supplies the correct voltage to power the halogen light inside the appliance. It steps down household voltage to safely operate the halogen bulb. Replace this transformer if the halogen light no longer turns on even with a good bulb, or if the light flickers intermittently.

If your oven won't ignite or heat, the hot surface igniter likely needs replacement. This part ignites gas to heat your oven. DIY-friendly repair.

This outer surface burner ring replaces the damaged or worn ring on a gas cooktop, restoring proper gas flow and burner alignment for safer, more even heating. Fits specified Samsung surface burners. What it does:

• Replaces a cracked, warped or corroded outer burner ring to re-establish correct burner geometry
• Helps restore consistent flame pattern and even cooking across the burner
• Can resolve issues like uneven heating or gas flame wandering at the burner edge
• Works with the matching inner burner and cap to form the complete burner assembly

• One outer surface burner ring

• Turn off gas supply and disconnect power to the appliance before servicing
• Allow all components to cool completely; burner parts may have sharp edges—wear gloves
• Remove burner cap and inner components, seat the new outer ring fully before reassembly

Torx-head service screw secures panels, brackets, and access covers in wall ovens and ranges. Replaces missing or damaged screws to restore fit.

Factory wafer-head Phillips screw (#8 x 3/8 in) secures panels, brackets, and covers. Replace missing, stripped, or damaged screws for proper alignment.

A single aluminum low-pressure service valve that provides a sealed access point for refrigerant charging, evacuation and pressure checks. Designed to restore proper serviceability for refrigeration and sealed-system maintenance. What it does:

• Provides a dedicated, sealed port for connecting gauges and service equipment to the low-pressure side of the refrigeration system.
• Allows safe charging, evacuation and pressure testing during diagnostics and repairs.
• Helps isolate and reseal the system after service to prevent refrigerant leaks.
• Commonly used when a refrigerator or freezer needs refrigerant service or pressure verification.

• Intended for experienced technicians; refrigerant work should follow all local regulations and EPA/other certification requirements.
• Depressurize and recover refrigerant before removing or replacing the valve.
• Inspect and replace any sealing O-rings, fittings or gaskets as needed; torque to OEM specifications.
• Test for leaks and proper operation before returning the appliance to service.

This single aluminum service valve is a sealed-system access valve used on compatible refrigeration systems to allow safe service, pressure checks and refrigerant charging. It provides a reliable access point without replacing major components. What it does

• Provides a sealed access point for refrigerant charging, pressure testing and diagnostic service
• Helps isolate the refrigerant line during repairs or evacuation
• Reduces the need to disturb larger sealed-system components when performing service
• Commonly used when addressing pressure/charge-related symptoms or performing routine diagnostics

• One single aluminum service valve

• Follow all refrigerant-handling regulations and use proper recovery equipment
• Depressurize the system and verify zero pressure before removing or installing the valve
• Inspect fittings and gaskets for damage and replace as needed to ensure a proper seal

This service assembly secures the injector/nozzle in the washer dispenser area, ensuring proper positioning for reliable dispense performance. Replacing a worn or broken holder restores correct alignment and helps prevent leaks or missed dispensing cycles. What it does:

• Holds and aligns the detergent/bleach injector or nozzle within the dispenser assembly
• Keeps the injector sealed and positioned to reduce leaks or misdirected flow
• Helps restore proper dispense when the dispenser fails to deliver detergent or shows inconsistent dosing
• Works as a direct replacement for a cracked, broken, or missing injector support

• Disconnect power and shut off water before service
• Handle clips and plastic tabs carefully to avoid breakage during install

Rubber bumper cushions oven door and components. Replace if cracked, worn, or missing to restore quiet operation and prevent metal-on-metal contact.

M4 x 12mm stainless steel service screw secures panels and small components in your cooktop or range. Replace worn, stripped, or missing screws.

The Stainless Steel Weather-Resistant Service Screw #8x3/8 for Gas Walk-Behind Mower is an essential component for maintaining your mower's performance. Crafted from high-quality stainless steel, this service screw is designed to withstand harsh weather conditions, ensuring long-lasting durability. The #8x3/8 size provides a secure fit, keeping your mower's parts firmly in place during operation. Using a genuine OEM part guarantees compatibility with your Samsung gas walk-behind mower, ensuring optimal performance and reliability. The weather-resistant properties help prevent rust and corrosion, extending the lifespan of your mower. Whether you're performing routine maintenance or replacing a worn-out screw, the Stainless Steel Weather-Resistant Service Screw DE81-02200A offers a dependable solution. Enhance the functionality of your gas walk-behind mower with this durable, high-performance service screw, designed to meet the highest standards of quality and functionality.