Ewdw6505gso Parts

The Bracket is an OEM replacement part for Frigidaire dishwashers. This component provides structural support for securing parts within the dishwasher, ensuring proper alignment and stable operation during cycles. Its precise fit is essential for the smooth functioning of your appliance.

Over time, the bracket may wear out or become damaged due to repeated use, corrosion, or accidental impact. A malfunctioning bracket can lead to misaligned components or instability during operation, potentially affecting the dishwasher's performance.

Symptoms of a bad bracket include:

• Loose or misaligned parts within the dishwasher
• Excessive noise or vibrations during operation
• Difficulty in properly installing or adjusting components
• Visible cracks or corrosion on the bracket

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Dispenser Assembly is an OEM part for Frigidaire dishwashers. It is responsible for dispensing detergent and rinse aid during the dishwashing cycle, ensuring that the correct amounts are released at the appropriate times for optimal cleaning and drying performance.

Causes of a bad dispenser assembly can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process. These issues can prevent the detergent or rinse aid from being properly released.

Symptoms of a bad dispenser assembly include:

• Improper dispensing of detergent or rinse aid
• Insufficient cleaning or rinsing results
• Leaks or drips from the dispenser area
• The dispenser door not opening or closing correctly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This circulation pump and motor assembly recirculates wash water through the spray arms so dishes get clean. Replace it to restore strong spray and quiet operation when the wash motor fails, becomes noisy, or leaks at the pump.

• Recirculates water from the sump through the spray arms during wash cycles
• Maintains proper water pressure and flow for effective cleaning
• Replaces a seized, weak, or noisy wash (circulation) motor
• Common symptoms: no spray or poor cleaning; humming or grinding from the pump; water leaking beneath the tub near the motor/pump

• Disconnect power and turn off the water supply before servicing
• Remove the toe panel; pull the dishwasher out as needed for under-tub access
• Place a towel to catch residual water; label/photograph wire and hose locations and transfer clamps from the original assembly
• Clean sealing surfaces; seat the assembly fully and test for leaks before reinstallation

Replacement pump assembly that moves water through the appliance to clear standing water and restore normal draining. Installs as a direct swap to address drainage problems and reduce water-related cycle interruptions. What it does:

• Pumps and removes water from the appliance to prevent pooling or overflow.
• Drives normal drain cycles so wash or rinse functions complete properly.
• Can resolve common symptoms such as water remaining in the tub, poor draining, or unusual motor/impeller noise during drain.
• Works with the appliance's existing hoses and wiring to circulate or discharge water as designed.

• Disconnect power and turn off water supply before starting any repair.
• Drain residual water from the appliance and be prepared for some spillage when removing the old pump.
• Label or photograph wiring connections before disconnecting; reconnect wires to matching terminals.
• Inspect hoses and seals while installing; replace any damaged clamps or gaskets to prevent leaks.

This drain valve controls the flow of water out of the appliance to remove standing water and prevent overflow. Replacing a faulty valve restores normal draining and helps stop pooling or persistent drain error symptoms. What it does:

• Opens and closes to release water from the appliance drain path.
• Works with the pump/drain line to move water out during cycles.
• Common issues indicating failure: appliance won't drain, water pooling, or intermittent drain errors.
• Fits as the direct replacement component for the OEM valve in affected models.

• Disconnect power and turn off the water supply before starting work.
• Expect residual water in hoses; have towels and a pan ready to catch spills.
• Remove and replace using basic hand tools; keep clamps and seals secure to avoid leaks.

This adjustable leveling leg threads into the appliance base to support and stabilize the unit. Replacing a worn or missing foot restores proper leveling for smoother operation, better door alignment, and reduced vibration.

• Provides height adjustment to level the appliance on uneven floors
• Helps keep the unit stable to minimize rocking and rattling
• Improves door alignment and closure when the cabinet is properly leveled
• Replaces a cracked, stripped, or missing leg

• Disconnect power; if your appliance has a water line, turn off the supply and carefully move the unit to access the leg.
• Support the appliance to relieve weight; unthread the damaged leg and start the new leg by hand to avoid cross-threading.
• Adjust height by turning the foot; use a level to ensure the cabinet is plumb and stable.
• Tighten carefully and recheck stability after the appliance is set back in place.

This is a dishwasher control board assembly. This component manages the functions of the dishwasher, which includes washing, draining, and drying. Since this part controls all of the functions of the dishwasher, if there are any problems with the operation it could be due to the control board assembly. This may include the washing cycle not running, the dishwasher not filling with water, or the detergent dispenser not opening during the washing cycle. If the user is unsure if this part is the culprit, a professional will be able to diagnose the issue. Unplug the dishwasher from its power source before replacing this part. The person performing the replacement may also wish to wear work gloves to protect their hands.This component is sold individually. It is compatible with dishwashers that are manufactured by Frigidaire, Whirlpool, and Electrolux. It is sourced directly from the manufacturer.

Replacement screw that secures trim, panels and internal components to restore proper fit and reduce rattling. Use when a fastener is missing, stripped, or corroded to help maintain stable, safe appliance operation. What it does:

• Secures panels, trim, brackets or other appliance parts to prevent looseness or movement.
• Replaces missing, worn, or damaged screws so components align and operate correctly.
• Helps reduce rattling, vibration noise, and gaps around doors or panels.
• Verify the exact size and thread before ordering to ensure proper fit.

• Disconnect power and water before starting any repair.
• Use the matching screw size and thread; do not force or overtighten.
• Start threads by hand to avoid cross-threading; use the correct screwdriver or bit.
• If threads or mounting holes are damaged, repair before reuse.

This electrical harness cable connects appliance controls and components to deliver power and signals for normal operation. It replaces a damaged or worn cable to restore reliable electrical connections and reduce intermittent faults. What it does:

• Provides secure electrical connection between control board and components
• Restores signal and power flow when original cable is frayed, pinched, or broken
• Helps stop intermittent operation, failed controls, or non-responsive functions caused by wiring faults
• Matches OEM configuration for plug fit and routing when installed correctly

• Always disconnect power to the appliance before starting any repair
• Compare new cable to the old one for connector type and length before installation
• Route and secure the cable following the OEM routing to avoid pinch points and heat sources

This hose clamp secures flexible water or drain hoses to fittings to prevent leaks and keep connections tight. It's a simple replacement that restores a secure seal and helps stop drips or loose hoses. What it does:

• Holds a rubber or plastic hose firmly to a barb or nipple to prevent leaks
• Restores a tight connection when original clamp is corroded, bent, or broken
• Helps eliminate water dripping, puddling, or intermittent leaks at hose joints
• Prevents hoses from slipping off during vibration or normal appliance use

• Disconnect power and shut off water supply before starting any repair
• Tighten clamp securely with pliers or the appropriate tool; avoid over-tightening which can damage the hose
• After installation, restore water and power, then check the connection for leaks

This is a replacement screw used to secure appliance panels and components, restoring proper fit and stopping looseness or rattling. It's a direct-fit fastener that helps maintain safe, stable operation when original hardware is missing or worn. What it does

• Secures panels, brackets, trim pieces or internal components in place
• Stops rattling or vibration caused by loose fasteners
• Helps maintain proper alignment of parts for reliable operation
• Restores missing or damaged mounting hardware

• Screw

• Disconnect power (and water if applicable) before accessing internal parts
• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; snug until secure to avoid damaging threads or parts
• Keep removed hardware organized before final assembly

No.7 plastic .375

Red

This O-ring seals the turbidity sensor assembly to help keep water contained and the sensor functioning properly. It's a small replacement seal for maintaining a watertight sensor connection and reliable turbidity readings. What it does:

• Seals the turbidity (water clarity) sensor housing to prevent leaks into the sensor area
• Helps maintain correct sensor operation so the control can monitor wash water clarity
• Restores a proper seal after sensor removal or repair

• Always disconnect power to the appliance before starting any repair.
• Remove the sensor assembly per manufacturer instructions; replace the old O-ring with the new one, ensuring it seats evenly in the groove.
• Inspect mating surfaces for nicks, debris, or old sealant and clean before installing the new O-ring.
• Use an appliance-safe lubricant compatible with rubber O-rings; avoid petroleum-based products unless specified.