Gie22jsnbrr Parts

The Fan Motor Grommet is an OEM replacement part for GE refrigerators. This small but essential component serves as a seal and insulator around the area where the fan motor shaft protrudes from the appliance body.

Causes of needing to replace the fan motor grommet can include normal wear and tear over time, exposure to extreme temperatures or moisture, or physical damage due to impact or improper installation.

Symptoms of a faulty or missing grommet include:

• Air leaks or drafts around the fan motor area
• Condensation buildup or frost formation near the motor shaft
• Increased noise or vibration from the fan motor assembly
• Reduced cooling efficiency due to air leakage

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

This is the evaporator fan blade that mounts on the freezer fan motor. It circulates cold air across the evaporator coils and throughout the compartments to maintain even, reliable temperatures. What it does:

• Moves air across the evaporator to cool and circulate airflow between freezer and fresh food sections
• Helps prevent warm spots and temperature swings inside the refrigerator
• Common failure signs include rattling/scraping noises from the freezer area
• Needed if the fan isn't moving air, the blade is cracked/loose, or cooling is weak despite the compressor running

• 1 evaporator fan blade

• Disconnect power before servicing; wear cut-resistant gloves around sharp sheet metal
• Remove shelves/drawers and the rear freezer panel to access the fan
• Pull the old blade straight off the motor shaft; transfer any clip/retainer if present
• Press the new blade fully onto the shaft; it spins freely without contacting the shroud before reassembly

The Snack Pan Rail is an OEM part for GE refrigerators. It is an integrated shelf component located in the fresh food door that secures GE snack trays and additional food storage accessories. The metal rail measuring approximately 14 1/2" L x 11" W, provides sturdy support within the refrigerator opening.

Causes of a bad snack pan rail can include dents, warping, or cracking that compromises its structural stability over time. Improper handling may also cause damage.

Symptoms of a bad snack pan rail include:

• Trays and pans failing to stay securely in place on the rail
• Gaps appear where accessories can fall out
• Difficulty removing or inserting snack trays smoothly
• Strange noises or vibrations emitting from the rail area

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Light Switch is an OEM part for GE refrigerators. It controls the refrigerator's interior light, turning it on when the door is opened and off when the door is closed. This ensures energy efficiency and convenience, illuminating the refrigerator's interior for easy visibility while searching for items.

Causes of a bad light switch include mechanical wear from constant use, damage from an impact, or electrical issues.

Symptoms of a bad Light Switch include:

• The interior light does not turn on when the refrigerator door is opened
• The light stays on when the door is closed, potentially leading to overheating or melted plastic components in the light housing area
• Intermittent functioning of the light, indicating a loose or damaged switch

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lid Bumper is an OEM part for GE refrigerators. It is designed to provide cushioning and protection for the refrigerator lid, preventing damage and ensuring smooth, quiet closing. 

Causes of a bad Lid Bumper can include deterioration over time due to frequent use, exposure to temperature variations, or damage from accidental impacts. A worn or damaged bumper may no longer provide adequate cushioning, leading to potential damage to the lid or the refrigerator itself.

Symptoms of a bad Lid Bumper include:

• The refrigerator lid closing too hard
• Unusual noises when closing the lid
• Visible wear or cracks on the bumper

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Stainless Steel Handle Set is an OEM replacement part for GE refrigerators. This comprehensive set includes both the refrigerator and freezer door handles, along with the necessary mounting hardware for a complete installation.

Symptoms of a bad Stainless Steel Handle Set include:

• Handles becoming loose or detached
• Difficulty in opening the refrigerator or freezer doors
• Visible wear, tarnish, or damage to the handles affects aesthetics and grip

Causes for a malfunctioning Stainless Steel Handle Set can include wear and tear from frequent use, mechanical issues with the attachment points, or environmental factors that affect the material's integrity.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Bottom Hinge Pin is an OEM replacement part for GE refrigerators. It facilitates the smooth and secure opening and closing of the refrigerator door. Positioned at the base of the door, this hinge pin ensures that the door is firmly attached, allowing it to swing open or closed with ease.

Causes of a bad Bottom Hinge Pin include wear and tear from regular use, corrosion, or mechanical damage that affects its structural integrity.

Symptoms of a bad Bottom Hinge Pin include:

• The refrigerator door not aligning properly
• Difficulty in opening or closing the door
• Unusual noises during the door’s operation
• Visible wear or damage to the hinge pin

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Evaporator fan front bracket is an OEM replacement part for GE refrigerators. Located inside the freezer compartment, this bracket securely mounts and supports the evaporator fan assembly.

Causes of a bad front bracket include breakage from repeated fan motion, cracking from temperature fluctuations over many years, or loosening of mounting points.

Symptoms of a bad evaporator fan front bracket include:

• Abnormal rattling or vibrational noises coming from inside the refrigerator
• Reduced airflow circulation leading to ineffective cooling
• Potential shifting or misalignment of other evaporator components

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Hinge Washer is an OEM replacement part for GE refrigerators. It is located on the hinge between the refrigerator door and cabinet. The refrigerator door hinge washer works to evenly distribute weight and reduce stress and friction, enabling smooth and durable door operation.

Causes of a bad hinge washer are generally normal wear and tear. However, damage may also occur from unusually heavy loads being placed on the door, or accidents that impact the door and hinge assembly.

Symptoms of a bad refrigerator door hinge washer include:

• Increased resistance when opening or closing the door
• Excessive noise from the hinge area
• Visible wear marks on the hinge
• Over time and with heavy use, the washer can break down, resulting in improper balance and alignment of the door.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Screw is an OEM replacement part for GE brand refrigerators. It is commonly used to secure panels, handles, shelves, or other parts of the refrigerator.

Causes of a faulty refrigerator screw can include wear and tear over time, damage due to mishandling or over-tightening, or loss of thread integrity. These factors can result in loose or ineffective connections, compromising the stability or functionality of the attached components.

Symptoms of a bad refrigerator screw may include:

• Loose or wobbly panels, handles, or shelves
• Difficulty in attaching or securing components
• Visible damage or breakage of the screw

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This refrigerator door shelf mounts on the inner door to hold condiments, jars, and bottles. Replacing a cracked or missing shelf restores secure, easy-access storage and helps keep items upright when you open and close the door.

• Snaps into the door's molded rails or end tabs to organize and retain containers
• Restores lost door storage capacity for condiments, jars, and tall bottles
• Common symptoms: cracked or broken plastic, loose or missing shelf, items falling from the door
• Visible damage or worn locking tabs prevent the shelf from staying seated

• Remove the old shelf by lifting up and out; empty contents before removal
• Align the new shelf with the door rails/end tabs and press down until fully seated—do not force
• No tools typically required; handle plastic carefully to avoid cracking
• Install in the same location as the original for proper fit and door clearance

The Grommet and Gasket Assembly is an OEM part for GE refrigerators. It is designed to create a secure seal around various refrigerator components, preventing air leaks and ensuring efficient operation. This assembly typically includes both the grommet and gasket, which work together to maintain the refrigerator's internal temperature and prevent moisture and contaminants from entering.

You should replace the grommet and gasket assembly if it becomes worn out or damaged. Causes of a bad grommet and gasket assembly can include regular wear and tear, exposure to temperature fluctuations, or physical damage that leads to cracks or deformities. A compromised seal can result in inefficient cooling and increased energy consumption.

Symptoms of a bad grommet and gasket assembly include:

• Air leaks around the refrigerator door or components
• Increased energy bills due to inefficient cooling
• Frost or condensation buildup inside the refrigerator
• Difficulty in maintaining the desired temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The water valve is an OEM part for GE refrigerators. It is located behind the fresh food door and controls the flow of water to the ice maker and water dispenser features. 

Symptoms of a bad water valve include:

• Leaks or drips from the valve area  
• Failure of the ice maker or water dispenser to operate as expected
• Inability to regulate water flow or sensor controls 

Causes of failure can be mineral buildup interfering with valve operation over time, crimps or kinks in supply line tubing, or worn-out seals and diaphragms within the valve mechanism.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement glass shelf for the refrigerator's fresh food compartment. It restores a level, easy-to-clean surface, helps contain spills, and brings back organized, usable storage space.

• Provides a flat storage surface in the fresh food section
• Helps contain small spills and maintains visibility to items below
• Replaces cracked, chipped, sagging, or missing shelf glass
• Addresses a shelf that no longer sits level or securely in its supports

• Unplug the refrigerator before servicing and wear gloves when handling glass
• Remove food from the area; support the shelf with both hands during removal/installation
• Slide the shelf out of the support rails or lift from the frame per your model's design
• Ensure the shelf is fully seated and level before reloading items

This bottom hinge supports the refrigerator door at the lower pivot point, keeping it aligned so it opens smoothly and seals correctly. Replace a worn hinge to restore proper closure and help maintain an airtight door seal.

• Provides the lower pivot and support for the door
• Helps maintain alignment for consistent gasket contact and smooth swing
• Wear or damage can cause door sagging, rubbing, or incomplete closure
• Misalignment can lead to air leaks and temperature fluctuations
• Clicking, grinding, or loose movement near the hinge may indicate wear

• Unplug the refrigerator; turn off water to the dispenser/ice maker
• Remove door bins/contents and support the door to prevent strain on wiring or tubing
• Remove the lower hinge cover, note shim/spacer locations, and transfer them to the new hinge
• Reinstall hardware, align the door, and ensure the gasket seals evenly all around

This is a grommet and it is intended for use on refrigerators and freezers. This is a genuine replacement part made by General Electric. A new grommet might be needed if the current one is visibly worn out or damaged in any way. If there are noises from vibration coming from the lower back area of the fridge there might be need for a new grommet. This is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with refrigerators and freezers, or units with a compressor and is made by General Electric.