Gpt220ssloss Parts

The 4.1 Amp Control Board Fuse is an OEM replacement part for GE dishwashers. This fuse is integrated into the control board, acting as a safety device that protects the dishwasher's electronic components from potential overcurrent situations. Blowing or breaking the circuit during electrical surges prevents damage to the control board and other sensitive components.

Causes of a blown fuse include power fluctuations or component failures causing excessive current draw. Over time, fuses may degrade from continued cycling.

Symptoms of a bad fuse include:

• Lack of power to control board and components it supplies
• The inability of the dishwasher to turn on or progress through cycles
• Potential electrical issues if surge currents are not limited

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Tub Gasket is an OEM part for GE dishwashers. This part is located around the edge of the dishwasher tub, designed to prevent water from leaking out during wash cycles. 

Causes of a bad Tub Gasket can include wear and tear from regular use, drying out or cracking over time, and damage from improper cleaning or harsh detergents.

Symptoms of a bad Tub Gasket include:

• Water leaking from the dishwasher door
• Visible cracks or tears in the gasket material
• The dishwasher door not closing properly, leading to inadequate sealing
• Increased moisture or water damage around the dishwasher area

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Detergent Module is an OEM part for GE dishwashers. This part dispenses detergent during the washing cycle. This module ensures the detergent is released at the appropriate time, optimizing cleaning performance.

Causes of a bad detergent module can include clogging from hardened detergent, mechanical damage to the dispenser door, or electronic malfunctions that prevent proper dispensing. 

Symptoms of a bad detergent module include:

• Detergent not dispensing during the wash cycle
• Poor cleaning results
• The dispenser door not opening or closing properly
• Visible damage or clogging in the module

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dishwasher hose clamp secures a hose to its fitting to maintain a tight, watertight connection. Replacing a fatigued clamp helps stop leaks and keeps water moving reliably during fill and drain cycles. What it does:

• Secures hose-to-fitting connections at the pump, sump, or inlet/outlet
• Maintains a tight seal to help prevent drips and leaks
• Replaces a clamp that has lost tension, corroded, or broken

• 1 hose clamp

• Disconnect power and turn off the water supply before servicing
• Access point varies by model; remove the toe-kick and/or pull the unit forward as needed; place a towel to catch residual water
• Relieve/loosen the old clamp, fully seat the hose on the fitting, position the clamp behind the fitting barb, and secure
• Use the appropriate tool for your clamp style and run a short test to check for leaks

The Inner Door Assembly is an OEM replacement part for GE dishwashers. It forms the interior lining of the dishwasher door, providing insulation and structure. Over many cycles of opening and closing the door, the internal mechanisms that allow the door to function properly may degrade.

Causes of a bad inner door assembly can include wear and tear of moving parts over time, restricting the smooth operation of the door. 

Symptoms of a bad inner door assembly include:

• The door not closing fully or securely latching in place
• Difficulty smoothly opening and closing the door 
• Noisy squeaks or other sounds coming from the door area

Replace yours today with this genuine GE OEM part to restore full functionality to your dishwasher door. This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

The Dishrack Roller is an OEM part for GE dishwashers. Mounted within the side walls, this plastic roller guides the dish rack in and out smoothly during loading and unloading. 

Symptoms of a bad dishrack roller include:

• Difficulty pulling or pushing the rack in and out of the tub
• Squeaking or grinding noises produced during rack movement    
• Rack jams or fails to fully extend on retrieval

Causes stem from normal wear of the roller bearing over repeated uses. The durable plastic material is carefully designed for quiet, seamless sliding.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This silverware basket fits in the dishwasher's lower rack and keeps flatware and small utensils upright and contained for thorough cleaning. Replace a damaged or missing basket to restore organized utensil storage and reliable wash performance. What it does:

• Holds and separates silverware and small utensils in the lower rack
• Helps prevent items from tipping or falling through during the cycle
• Restores proper organization when the original basket is cracked, warped, or missing
• Common signs: broken cells or handle, lid won't latch, utensils scattered after a cycle

• Includes 1 silverware basket and lid

• Allow the dishwasher to cool after a cycle; remove any sharp utensils before handling
• Lift out the old basket and place the new basket in the designated lower-rack position
• Ensure the lid is oriented correctly and opens/closes freely; basket should sit flat
• Spin the lower spray arm by hand to confirm there's no interference

The Door Latch is an OEM part for GE dishwashers. It plays an integral role in securing the dishwasher door safely closed during operation, providing a proper seal for optimal cleaning and drying.

Causes of a bad Door Latch can include wear and tear of latch components from repeated usage, damage due to excessive force on the door, or moisture penetration resulting in latch malfunction. 

Symptoms of a bad Door Latch include:

• The door not latching fully or remaining partially open  
• Leaks or spray around door seal area during washing
• The door disengaging or popping open during cycles
• Error messages related to door closure or latching 

Replace yours today with this genuine OEM GE part to ensure your dishes are safely washed behind a securely closed and sealed door. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This middle spray arm conduit assembly restores proper water delivery to the dishwasher's middle level. It channels wash water to the mid arm and rotates to improve coverage on the upper rack for consistent, reliable cleaning.

• Routes water from the pump to the middle spray arm to wash items on the upper rack
• Spins and sprays through jet holes for even coverage
• Replaces cracked, warped, or clogged assemblies that hinder rotation or spray
• Typical symptoms include poor cleaning on the upper rack, the mid arm not spinning, or visible damage/clogs

• Disconnect power and water supply before servicing
• Pull out the upper rack; release the rear coupling/retainer and any tabs or clips to remove the old assembly
• Fully seat the new assembly into the rear water supply port; ensure the spray arm spins freely
• Run a short test cycle to check for leaks

The UI Control Assembly is an OEM part for GE dishwashers. It manages all the electronics and user interface components on the control panel. This assembly includes the control board that directs water temperature, wash cycles, and more based on user selections. 

Causes of a bad UI Control Assembly can include water damage from leaks, failure of electronic components over time, or issues with the control panel buttons or display. 

Symptoms of a bad UI Control Assembly include:

• The dishwasher not starting or not responding to selections
• Inability to change settings or cycles 
• Error codes appearing on the display
• Unresponsive or non-functioning buttons

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This clamp kit replaces worn Piranha-style clamps used in the dishwasher's wash system. Restores a tight, reliable seal on internal connections to help prevent leaks and maintain proper water circulation for consistent cleaning results.

• Secures internal hose and pump connections within the wash system
• Helps stop water leaks caused by loose, stretched, or damaged clamps
• Supports proper circulation and wash performance by keeping joints sealed
• Common symptoms: water under the unit, drips at hose joints, loose connections, vibration or rattling from the sump area

• Disconnect power and shut off the water supply before servicing
• Access the sump/pump area from the front toe-kick or by pulling the unit out as needed
• Replace one connection at a time; position and fully seat the new clamp(s) on clean hose/barb surfaces
• Restore power/water and run a short cycle to check carefully for leaks before reinstalling panels

The Mid Spray Arm and Gasket Assembly is an OEM replacement part for GE dishwashers. It refers to the horizontal rotating component above the lower rack that provides mid-level spray coverage. Over many cycles of use, seals, and joints can harden.

Symptoms of a bad mid-spray arm assembly include: 

• Water leaks inside the dishwasher tub from dried-out or cracked mounting gaskets
• Difficult rotation indicating worn bearings or corroded fasteners  
• Impeded spray patterns with diminished cleaning on rack shelves

Causes leading to failure are typically repetitive motions stressing connections combined with seal exposure to heat and chemicals causing deterioration.

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

Keep your dishwasher's pump protected. This glass trap sits in the sump and captures broken glass and large debris before it reaches the wash motor and spray system, helping maintain water flow and consistent cleaning performance.

• Traps shards and hard debris in the sump to protect the wash motor and pump
• Helps maintain proper water circulation and spray pressure
• A clogged or damaged trap can cause poor cleaning or grit left on dishes
• Grinding or rattling from the sump area may indicate debris in a compromised trap
• If the trap won't seat or lock, debris can bypass filtration

• Disconnect power and water; wear cut-resistant gloves to handle broken glass and sharp debris
• Remove the lower rack and, the lower spray arm; unlock and lift out the old trap
• Clear all debris from the sump; inspect sealing surfaces and nearby filter components
• Seat the new trap fully and lock it in place; reassemble and run a quick test for proper operation

The Rack Slide End Cap is an OEM replacement part for GE dishwashers. These end caps are installed on either side of the upper and lower dish racks to facilitate smooth gliding movement while preventing any snags. 

Causes of bad rack slide end caps can include wear and tear from repeated use, damage from impact of dishes, or cracks/breaks which reduce functionality. 

Symptoms of bad rack slide end caps include:

• Difficulty sliding racks in and out 
• Loud squeaking or grinding noises during rack movement
• Misalignment of dish racks  
• Dishes unable to fit properly due to movement restrictions

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This outer door panel assembly is the stainless front skin of your dishwasher door. Replace a dented, scratched, or corroded panel to restore the appliance's look and ensure proper fit for the handle and trim. What it does:

• Forms the visible stainless exterior of the dishwasher door
• Helps protect the inner door liner from everyday bumps and wear
• Provides attachment points for compatible handle/trim
• Replacement can address dents, deep scratches, corrosion, or a loose/warped outer panel

• Disconnect power at the breaker before servicing.
• Open the door and support the panel while removing the inner-door perimeter screws.
• Carefully separate the old panel and transfer any model-specific trim or hardware as needed.
• Align the new panel and reinstall screws evenly; avoid overtightening to prevent distortion or finish damage.

This flood float and switch assembly senses the dishwasher's water level and signals the control to stop filling at the proper point, helping prevent overfilling and leaks while restoring consistent, correct fill for reliable wash performance.

• Senses rising water level via a float and actuates the switch
• Signals the control to stop water flow when the set level is reached
• Failure symptoms include no fill, continuous filling/overfilling, intermittent filling, or continuous draining at startup
• Restores proper water-level protection and helps prevent leak damage

• Disconnect power and shut off water supply before servicing; wear cut-resistant gloves
• Access is typically from the lower front/toe-kick area; remove panels to reach the float/switch housing
• Move wire connections one at a time to the new assembly; ensure the float moves freely after installation
• Run a brief fill test and inspect for leaks before fully reassembling