Lra12142 Parts

This window filler kit installs on the sides of a window air conditioner to close gaps between the chassis and the window frame. It helps secure the unit and limit air leaks, moisture, and pests from entering the room.

• Closes the left and right side openings between the unit and sash window
• Helps stabilize the air conditioner and reduce vibration noise
• Replaces cracked, brittle, warped, or missing side curtains/fillers
• Common signs: drafts or visible gaps around the unit; torn or broken accordion panels

• Disconnect power and support the air conditioner to prevent a fall
• Slide the fillers into the unit's side channels or mounting frames per your model's instructions
• Reuse the unit's hardware as directed; avoid overtightening fasteners in plastic components
• After installation, ensure the unit is secured and pitched for proper drainage per manufacturer guidance

This factory air filter helps keep your appliance's ventilation system clean and unrestricted. Replacing a dirty or damaged filter supports proper airflow, protects internal components, and helps reduce unwanted odors during normal operation.

• Screens airborne debris along the intake/exhaust path to protect internal parts
• Helps maintain consistent airflow for effective ventilation
• Replace when clogged, torn, warped, or missing
• Common signs include weak ventilation, lingering odors, or a visibly dirty/damaged filter

• Disconnect power before servicing
• Access the filter location per your model (grille, vent panel, or access cover)
• Note orientation and fully seat the new filter; secure any tabs or screws as designed
• Do not operate the appliance without the filter installed

This replacement filter helps capture airborne particles during normal operation, protecting internal components and supporting proper airflow and performance. Replace a damaged or clogged filter to keep your appliance working efficiently and safely.

• Traps dust, grease, and debris from the airstream to protect the blower and internal parts
• Helps maintain proper airflow for effective ventilation and performance
• Replace if the filter is torn, saturated, misshapen, or heavily clogged
• Common symptoms of a worn filter include reduced airflow, lingering odors, and increased fan noise

• Disconnect power to the appliance before servicing
• Allow hot surfaces to cool; wear cut-resistant gloves—edges can be sharp
• Note the orientation of the old filter and seat the new one the same way
• Restore power and verify airflow after installation

Replacement evaporator fan blade that moves cold air across the evaporator coil and through the refrigerator compartments to help maintain even temperatures. Restores airflow to reduce warm spots and improve overall cooling consistency. What it does:

• Spins on the evaporator fan motor to circulate cold air through the freezer and fresh-food sections.
• Restores proper airflow when the original blade is cracked, warped, or broken.
• Common symptoms prompting replacement: reduced or uneven cooling, rattling/scraping noises from the freezer, or visible blade damage.
• Helps prevent excessive frost buildup by maintaining steady airflow over the evaporator.

• Disconnect power to the appliance before beginning any service.
• Handle the blade carefully; edges and broken pieces can be sharp.
• Ensure the blade is fully seated on the motor shaft and any retaining hardware is reinstalled per the OEM's guidance.

This retainer secures a mating component in your appliance so it stays properly aligned during use. Replacing a damaged or missing retainer restores a snug fit, reduces vibration noise, and helps prevent the attached part from shifting or falling.

• Secures the attached part to prevent movement and vibration
• Maintains proper alignment and fit within the assembly
• Failure clues: attached component is loose, rattles, sags, or won't stay in place
• Visual signs: retainer is cracked, deformed, worn, or missing

• Disconnect power to the appliance before starting; allow hot or moving parts to cool/stop
• Note the original orientation and position; take a quick photo for reference
• Seat the new retainer fully and transfer any original fasteners as needed
• Do not overtighten hardware; verify the held component is secure before reassembly

Handheld remote control that restores convenient, wireless operation of your Frigidaire appliance. Use it to send commands for functions, settings and timers when the original remote is lost or no longer responding. What it does:

• Sends infrared/remote commands to the appliance so you can change settings from a distance.
• Lets you start, stop or adjust modes and timers without using the appliance control panel.
• Replaces a lost, cracked or unresponsive original remote to restore remote operation.
• Requires pairing/programming with the appliance per the owner's manual.

• Remove power or unplug the appliance before accessing internal components; handle electronics carefully.
• Use fresh batteries and insert them following polarity markings; follow local rules for battery disposal.

This electronic control board manages the appliance's user controls and electronic functions so buttons, displays, and timed cycles operate correctly. Replacing a faulty board can restore normal control response and display behavior. What it does:

• Receives user inputs and sends control signals to motors, valves, heaters, and displays
• Manages timed cycles, settings, and electronic diagnostics
• Can cause unresponsive buttons, blank or erratic display, or failure to start when faulty
• Works as the central logic module coordinating other electronic components

• One electronic control board (single complete assembly)

• Disconnect power (unplug or shut off breaker) before service to avoid shock
• Handle the board by its edges and avoid static discharge; wear an ESD strap if available
• Installation typically requires removing the control console or access panel and unplugging harness connectors

This electronic control board manages oven functions and user inputs so cooking cycles, timers, and display settings operate correctly. It replaces a failed or unresponsive oven control to restore normal keypad, clock, and bake/clean operations. What it does:

• Receives commands from the control keypad and runs the oven's heating and timing circuits.
• Controls bake, broil, timers and display signals for temperature and clock readouts.
• Can correct symptoms like no display, unresponsive touchpad, or failure to start heating when faulty.
• Interfaces with sensors and relays to sequence oven functions.

• Disconnect power at the breaker before accessing the oven control to avoid shock.
• Handle the board by the edges and avoid touching component leads; ESD precautions recommended.
• Verify connectors are fully seated and secure all mounting hardware before restoring power.

This replacement power cord restores AC power to compatible refrigerators by replacing a damaged or worn supply lead. It provides a direct, safe power connection so the appliance can run reliably. What it does:

• Replaces a frayed, cut, or otherwise damaged power supply cord
• Restores consistent power when the appliance will not turn on or has intermittent power
• Maintains the appliance's grounding connection for safe operation
• Prevents electrical arcing from exposed wiring or compromised insulation

• One replacement power cord

• Disconnect the appliance from the power source before inspecting or replacing the cord
• Install with the proper strain relief and secure fasteners to prevent pinching or pull-out

This thermistor is the refrigerator temperature sensor that helps the control board monitor and regulate cooling. Replacing a failed thermistor restores accurate temperature readings for more consistent fridge and freezer performance. What it does:

• Senses internal air temperature and sends that information to the control board
• Helps the defrost and compressor cycles run at the correct times
• Commonly linked to symptoms like inconsistent temperatures, error codes, or a unit that runs constantly
• Does not control cooling directly but provides the temperature feedback the system needs

• Always disconnect power to the appliance before beginning service
• Typically located in the fresh food or freezer compartment near the evaporator
• Handle the sensor and wiring gently; avoid pulling on the wires or bending the probe sharply
• If troubleshooting, verify wiring and sensor resistance per the manufacturer's service instructions before replacement

This oven temperature sensor detects the internal temperature and sends readings to the range control so the oven can maintain accurate cooking temperatures. Replaces a failed or intermittent sensor to restore reliable temperature control. What it does:

• Senses oven cavity temperature and provides temperature data to the control board
• Helps the control maintain set bake/roast temperatures
• Common symptom: oven temperature is incorrect or fluctuates during cooking
• Common symptom: cook cycles take too long or oven does not reach set temperature
• Common symptom: oven displays a temperature sensor or sensor fault code

• One oven temperature sensor (1 each)

• Disconnect electrical power to the appliance before removing or installing the sensor
• Handle the sensor carefully to avoid damaging the probe or wiring and ensure proper connector seating
• Inspect wiring and connector for damage; replace if frayed or corroded

This electronic control is the user interface and control board that manages oven functions, timers and temperature regulation to restore responsive controls and proper cooking cycles. Fits as the direct replacement control assembly. What it does:

• Replaces a faulty oven control board to restore display, keypad and timed functions.
• Manages temperature setpoints, bake/broil cycles and timed cooking operations.
• Commonly used when the display is blank, buttons are unresponsive, or oven fails to heat properly.
• Interfaces with sensors, switches and relays to coordinate heating elements and fans.

• Disconnect power to the appliance before servicing to avoid shock risk.
• Handle the board by its edges; avoid touching components and connectors to prevent ESD damage.
• Verify connector orientation and secure all fasteners; ensure wiring harnesses are fully seated.