Peb7226sfss Parts

This replacement hook fastens a mating part to your appliance, keeping the assembly properly retained and aligned. Replacing a worn or missing hook restores a snug fit, reduces rattles, and ensures components stay securely in place.

• Provides the retention point for a panel, grille, or assembly
• Maintains proper alignment and support during operation
• Helps prevent looseness, vibration, or rattling
• Symptoms include: part won't stay seated, difficulty latching, or a loose fit

• Disconnect power to the appliance before servicing
• Access the mounting area and note the hook's orientation and location
• Transfer and reuse any original screws/clips or hardware as required
• After installation, ensure the mating part engages fully and operates normally

This replacement foot fits select GE microwaves. It provides a stable, cushioned contact point so the unit or its removable rack sits level, stays steady during operation, and helps protect surfaces from wear.

• Supports and cushions the microwave cabinet or a removable rack/accessory
• Helps keep the unit level to reduce wobble and vibration
• Protects interior and countertop surfaces from scuffs and marks
• Replaces missing, cracked, or flattened feet that cause rocking or rattling

• Disconnect power and allow the appliance to cool before servicing
• Remove the worn or missing foot and clean the mounting area
• Press or slide the new foot fully into place until secure
• The unit or rack sits level and stable before use

This main control board is the central electronic controller that manages key appliance functions, timers and user interface signals, helping restore responsive controls and proper operation when the original board fails. What it does:

• Receives inputs from the user interface and sensors to control cycles, heating elements and motors
• Manages display and status indicators so settings and error codes appear correctly
• Replaces a board that causes unresponsive controls, incorrect cycles, no display or intermittent operation
• Helps stop erratic behavior caused by failed relays or damaged circuitry on the original PCB

• Disconnect power at the breaker before starting; carry out repairs only with the appliance de-energized
• Handle the board carefully and avoid ESD damage; ground yourself and use anti-static precautions
• Reconnect all wiring harnesses and mounting hardware exactly as removed; note connector locations before disassembly
• Test the appliance after installation and restore power only when covers are securely reinstalled.

This humidity sensor measures humidity levels inside the fresh-food compartment so the refrigerator can regulate humidity-sensitive features and help preserve produce. It replaces a failed or inconsistent humidity reading for better climate control. What it does

• Detects moisture/humidity in the fresh-food area so the fridge control can adjust dampers or humidity settings
• Helps reduce excess moisture, condensation, or premature spoilage when functioning properly
• Can resolve symptoms like erratic humidity readings, dampness or frost buildup, or related control errors
• Interfaces with the refrigerator control board to provide real-time humidity feedback

• One humidity sensor module

• Disconnect power to the appliance before replacing the sensor to avoid shock or damage
• Typically plugs into the control harness; handle the sensor and connector with care to avoid bending pins
• Avoid contaminating the sensor element with liquids or cleaners during installation
• Check the control board and wiring harness for faults

The Noise Filter is an OEM part for GE built-in microwave ovens. It is installed inside the unit and functions to reduce electromagnetic interference generated by the microwave. The noise filter works to contain microwave leakage and shield against RF noise that could disrupt other appliances, electronics or wireless signals. 

Symptoms of a faulty noise filter include:

• Interference with or disruption of nearby electronics/devices  
• Excessive microwave leakage detectable outside of the unit
• Buzzing or abnormal microwave humming noises
• Replacement of the filter is generally not user-serviceable

Causes of failure usually relate to prolonged microwave usage and exposure to high-frequency energy, which can degrade insulation and shielding over time.

This part is also compatible with some Hotpoint, RCA and Kenmore microwave models.

The Interlock Switch is an OEM replacement part for GE microwaves. It acts as a safety device that prevents the microwave from operating unless the door is securely closed and latched. The switch monitors the door position and communicates with the main control board to allow or cancel cooking functions.

Causes of failure may include damage from excess heat over time or wear from repeated door openings and closings. Failures can compromise safety if the microwave operates unexpectedly while open.

Symptoms of a bad interlock switch include:

• Microwave can be turned on even when the door is open     
• Error codes displayed related to door issues  
• Inconsistent or faulty communication with the control board

This genuine OEM replacement part is also compatible with GE, Hotpoint, and select Kenmore microwave models.

This high-voltage diode assembly rectifies high AC voltage to DC in your microwave's power circuit so the magnetron can generate heat. Replacing a failed diode can restore heating and eliminate symptoms tied to a shorted or open diode. What it does:

• Converts high AC voltage to DC for the magnetron
• Blocks reverse current to protect the high-voltage circuit
• Common failure symptoms include: runs but no heat, loud humming/buzzing, or a blown internal fuse/tripped breaker

• Unplug the appliance; the high-voltage capacitor can retain a dangerous charge—discharge it before servicing
• Match the diode's orientation/polarity to the original; diodes are polarized
• Reuse existing mounting hardware and ensure all connections are tight and insulated as designed

This main wiring harness routes power and signals between the appliance control and key components so the unit can operate safely and reliably. It replaces a damaged or failed harness to restore electrical continuity. What it does:

• Carries power and control signals between the control board and motors, heaters, valves, and sensors.
• Restores electrical connections when frayed wires, broken terminals, or heat-damaged insulation cause faults.
• Can resolve symptoms such as intermittent operation, no power to components, or components that won't respond.
• Prevents arcing or short circuits caused by exposed or loose wiring when properly installed.

• Disconnect all power (unplug or shut off breaker) before starting work.
• Take photos or label connectors to ensure correct reconnection.
• Inspect mating connectors and mounting points; replace if damaged.
• If you see melted insulation, corrosion, or repeated failures, investigate upstream causes (overheating, shorts) before reinstalling.

The Door Gasket is an OEM part for GE built-in microwaves. Installed around the inner edge of the microwave door, this rubber seal forms an important barrier and insulation component. 

Symptoms of a defective door gasket include: 

• Microwave leaking heat or emitting sounds/vibrations during operation
• Visible wear, cracks or shrinkage around the door sealing area  
• Difficulty closing or locking the door securely
• Steam or condensation developing inside the cavity or door glass  

Factors like age, heat deterioration or damage over time can compromise the pliable material. 

This genuine OEM GE replacement is compatible with additional Hotpoint, RCA and Kenmore models.